Safety I/O

Flexi loop is an economical solution to meet the need for safe switches and sensors within a machine that also supports transfer of detailed diagnostic information. Keeping the highest level of safety consistent, this system can cascade ...

I/O modules PSS67 for the automation system PSS 4000 Compact modules with IP67 protection are now available, the PSS67 IO1 16FDI with SafetyNET p. Thanks to the fully encapsulated module electronics, the IP67 modules are particularly ...

Combine freely for your application A selection of I/O modules for safety-related and non-safety-related digital signal processing is available for the remote I/O system PSSuniversal 2. You can configure the system to fit your requirements, ...

For cabinet-free installation with IP67 With the PDP67 modules Pilz offers solutions for decentralised applications directly in the field. Thanks to protection type IP67 the modules are resistant to dirt and water. The decentralised ...

Safety and standard components in one network For connecting mechanical contacts such as safe contact elements For connecting inductive sensors Safe modules with two safe inputs Safe modules with two safe inputs and two ...

The Safety Hub links automation and safety technology for the first time via IO-Link. This new I/O module is merely linked to the IO-Link Master. Because the system is open toward the system level, you can connect nearly any safety device. By ...

For safety-related applications, we offer IP67 block I/O modules with safe digital inputs and universal digital channels that can be used as inputs or outputs. The modules also feature non-secure universal digital channels and IO-Link ...

Safe AS-i modules for field applications and control cabinets Integration of safety-related components in AS-i Connection of safe mechanical contacts and safe three-wire sensors Three freely selectable directions of the ...

Kuhnke’s FIO Safety PLC is a module intended to expand EtherCAT networks. Acting as the FSoE master, it is able to address any FSoE slave including safety I/Os, motion controllers, valve islands and other FSoE equipment. The Safety PLC ...

Kuhnke’s FIO Safety SDI4/SDO2 is a safety I/O terminal featuring four safe digital input channels and two safe digital output channels. This expansion module from Kuhnke’s FIO range easily integrates in any EtherCAT® network. Four inputs ...

The device DAT10024 drives up to 4 voltage signals up to 10V or current up to 20mA connected both in active and passive loop in digital format. The data are transmitted with MODBUS RTU / MODBUS ASCII protocol over the RS-485 network. To ...

The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST ...

The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST ...

This sériés has intrinsic safety inputs: They are asso-ciated equipment, placed in safe area. They hâve input circuits for connection to a sensor placed in hazardous area and output circuits for connection in safe area only. These instruments ...

This sériés has intrinsic safety inputs: They are asso-ciated equipment, placed in safe area. They hâve input circuits for connection to a sensor placed in hazardous area and output circuits for connection in safe area only. These instruments ...

MO 690.HCX FET Extension Features: - 6 FET Outputs (High Side) (10 A/ch) Casting Material: GF 30 % Polyamid Supply Voltage: 12 or 24 VDC Operating Temperature: -40°C ... +80°C Connector: 24 Pin Connector

Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX-IOX fulfils the safety ...

The module MU110-24.1TD is a 1-channel input module for resistor bridges (strain gauge). The module enables the direct connection of a resistor measurement bridge. The module requires 24 V DC power supply and supports Modbus RTU/ASCII ...

The analog input module MV110-24.8A has 8 analog inputs which can be connected to various types of RTDs, thermocouples, position encoders and standard signals. The more detailed list of possible connection types can be found in the technical ...

SIL 3 SWITCH/PROXIMITY INTERFACE DESCRIPTION The dual channel Switch/Proximity Detector Interface D6034D is a high integrity repeater, designed to interface contacts or proximity detectors (EN60947-5-6, NAMUR) and is suitable for applications ...

SIL 3 SWITCH/PROXIMITY INTERFACE DESCRIPTION The single channel Switch/Proximity Detector Interface D6034S is a high integrity repeater, designed to interface contacts or proximity detectors (EN60947-5-6, NAMUR) and is suitable for ...

SIL 2 SWITCH/PROXIMITY DETECTOR REPEATER O.C. OUT DESCRIPTION The Switch/Proximity Detector Repeater type D6231E is a unit with eight independent channels suitable for applications requiring SIL 2 level (according to IEC 61511) in safety ...

The safety-input bus terminal is a digital input terminal for sensors with potential-free contacts for 24 V DC. This module has four fail-safe inputs and meets the requirements of IEC 61508 SIL 3 and EN 954 Cat. 4. The safety-output ...

What makes the "E°UBM" type series so impressive is its enormous power density, multitude of modules, and simple manageability. With a width of only 11.5 mm per module, it saves space in control cabinets and, despite its very compact ...

The digital input/output modules are used as a signal connection for the safety peripherals. The connection of all standard sensors provides maximum flexibility. The integrated fast shut-off function reduces the reaction times of the ...

VIPA SLIO Modules Modular Construction for Quick Assembly Compact: 12.9 mm X 109 mm x 76.5 mm (W X D X H) Standardized: Direct mounting on 35 mm standard profile rail Extendable: Easy to expand as needed. Add up to 64 ...

Our Guardmaster® Safety t-ports/splitters, distribution boxes, shorting plugs, and taps are parts of a quick-disconnect system dedicated to machine safety. GuardLink™ taps connect safety input devices to a GuardLink system, a safety-based ...

Rockwell Automation announces that as of June 2018, the 1753 GuardPLC™ Safety I/O will be discontinued and no longer available for sale. Additional Information Rockwell Automation announces that as of June 2018, the 1753 GuardPLC Safety ...

This Bulletin 1753 GuardPLC™ Safety I/O offers the same convenience that the Allen-Bradley® Guard PLC systems has offered. It is designed with a digital and analog I/O blocks that received the approval of c-UL-us, CE, c-Tick, and TUV ...

Safety in the system does not begin with the drives first, but at the control level. With the expansion of the controller software to include the Safety Controller c250-S a complete automation solution is provided for safety engineering ...

PAC8000 controllers are specifically designed to handle the extreme temperatures, vibration, and corrosive materials found in process applications. They include a process controller featuring DCS-style function block programming, a logic ...

3-channel Digital Input with Open/Short Circuit Detection and 1-channel Relay Output Module Features Power Relay Output Dry Contact Digital Input Digital Input With Open/Short Circuit Detection +/-4 kV ESD Protection Tiny Form Factor ...

Description The Remote I/O Module ANTARES 8DI-N is operated and supplied with power by means of the Rail Control unit (RCU) ANTARES. This module is suitable for connecting 8 intrinsically safe binary signals in hazardous areas. NAMUR ...

Expand the capabilities of your vehicle control system with our CAN-based Input/Output modules. These stackable microcontroller add-ons integrate new control functions smoothly and effectively. You can use our I/O modules as the building ...