Remote I/O

GW1-ETH-WQ-EU is an Ethernet gateway that converts Ethernet into wireless in the Sub-1GHz band. Data from the wireless I/O series terminal (Slave) can be sent to a PC via Ethernet, or received data from computers can be sent via Ethernet.With ...

New Remote I/O modules with Hight-functional Firmware Configurable Type in the CONPROSYS M2M series Easily connect modules using the stack method. Users are able to combine I/O modules freely and connect them to the CPU module in ...

DIO-0404LY-WQ-EU is a digital I/O terminal that sends I/O digital signals wirelessly in the Sub-1GHz band. *1 Data is sent to Ethernet gateway (Master) of the Wireless I/O series (GW1-ETH-WQ-EU). With strength against obstacles, capability ...

FB Remote I/O stations are mounted in Zone 1 hazardous areas. They form a modular signal conditioning system to interface signals from the field with a control system in the safe area. FB Remote I/O connects your conventional sensors ...

LB remote I/O stations are mounted in Zone 2, Class I/Div. 2 hazardous areas. They form a modular signal conditioning system to interface signals from the field with a control system in the safe area. LB Remote I/O connects your conventional ...

Combine freely for your application A selection of I/O modules for safety-related and non-safety-related digital signal processing is available for the remote I/O system PSSuniversal 2. You can configure the system to fit your requirements, ...

The Modular XI/ON, composed of block, slice, and gateway, guarantees intelligent and communicative terminals. The block and slice design is compact, and modularity is guaranteed, with user needs met by a correct number of channels. Fast, ...

The MELSEC ST series is an universal solution for distributed automation systems. Its modular architecture makes MELSEC ST exceptionally flexible, so that it can be configured precisely for any application. MELSEC ST is Mitsubishi's ...

The EH-RIO2 series of Remote I/O modules allows you the flexibility to distribute I/O throughout your application. Using EH-RIO2, you can precisely plan and expand your I/O and locate them right where they are needed: close to the sensors and actors.

- 12-ch DI, 6-ch DO, Ethernet-based smart I/O - Remote monitoring and control with mobile devices - Group configuration capability for multiple module setup - Flexible user-defined Modbus address - Intelligent control ...

Advantech's new generation of remote I/O & sensing devices bring an IT oriented spirit to the market. With the advanced concepts of data A-P-P, data Acquisition, data Processing to data Publishing, fulfilling mobile monitoring and controlling ...

- Suitable for EtherCAT networks - 8-ch, 16-bit analog input channels with 2,500 VDC isolation - ±275 V high common-mode voltage range - Quick removable European type connector - Supports EtherCAT Distributed Clock ...

Ovation™ I/O Comprehensive suite of I/O modules to support long-term process reliability and expandability Ovation™ I/O Overview Features ▪ Modular, plug-in components support long-term process reliability ▪ Modules are installed ...

RSTi-EP Modbus TCP Network Adapter, 2 Cu RJ45 Ports, 2048 bytes (Input + Output) a Modbus TCP network adapter and the head module for the RSTi-EP communication bus. Facilitates up to 64 active RSTi-EP modules with two Ethernet ports ...

WAGO-I/O-SYSTEM 750 XTR We automate where others capitulate – reliably and economically, up to Zone 0/20 hazardous areas! Your benefits: •eXTReme temperature resistance from −40 to +70 °C (−40 … +158°F) •eXTReme isolation (up to ...

I/O Systems For optimal automation both inside and outside the control cabinet: the flexible IP20 and IP67 remote I/O systems for all applications and environments. Your benefits with WAGO's I/O Systems: •Fieldbus-independent: Compatible ...

The particular RIO600 distant I/O device is built to broaden digital enter not to mention output amount of ABB’s Relion® IEDs and also to supply digital inputs not to mention components for the COM600 channel automatic system utilizing ...

Performance and practicality for machine controlModern machine control requires system-wide synchronisation of motion axes with microsecond accuracy. The NX I/O system offers this timing accuracy and repeatability for a wide variety of ...

The smartest modular I/O systemOmron's SmartSlice I/O system is compact, intelligent and easy. When used with Omron's CS1/CJ1 DeviceNet master units it is plug-and-work, no configuration tool is required. By using built-in functions such ...

EtherCAT is an extremely fast industrial automation network, which uses standard Ethernet cabling. It makes very efficient use of the standard Ethernet transmission frame, with each node accessing the entire frame on the fly. This reduces ...

The ARD Series comprises of remote I/O module. It is integrated with different functions including its automatic communication speed identification and network voltage monitoring duties. A noise resistance and an extensive dependability ...

DeviceNet Analog Remote I/O (Terminal Block Type) The ARD-A series analog remote I/O units provide input/output expansion and communication for various devices using DeviceNet protocols. The ARD-A series provides high measurement accuracy ...

Modbus RTU Digital Remote I/O (Sensor Connector Type) The ARM series digital remote I/O units provide input and output expansion for PCs, PLCs, and Autonics logic panels using standard Modbus RTU protocols. The sensor connector type ...

The digital IOs are optimized for fast detection of digital signals and switching of actuators and can be operated directly on a control or decentralized via a bus coupler. Modules are available with a granularity of 8 and 16 for inputs ...

Georgin offers a remote input solution for standard applications. Specificities: » Simplified configuration by Switch » Power and Modbus through the rear connector Module reference: » GMB 96100 - Module with 1 standard analog input ...

With a proven know-how, Geogin proposes remote I/O solutions for all type of applications in hazardous area. Characteristics: » Interfacing of all type of signals (DI, DO, AI, AO) » Installation in stainless steel or GRP (glass reinforced ...

Whether analog or digital, the recording and output of signals from a decentralized installation requires a suitable means of signal transmission. The KEB I/O system is based on the fast and economical Ethernet hardware with EtherCAT ...

These fieldbus modules from Elobau are able to provide the operators with a direct connection with the PLC. Changes to the system may be made through the bus configurator. However, the T connector on the base modules' rear ends only allow ...

-CH Digital input module / RS485 The Z-D-IN is used to interface 5 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocol MODBUS RTU through ...

The Z-8TC from Seneca is a Digital I/O module that is specially designed with 8 thermocouple input channels that are compatible with RS485 2 wire and ModBUS RTU slave protocol. This unit is powered by a voltage of 10 up to 40 V DC. It ...

The Ursalink UC3x14 series is smart I/O product with an embedded cellular modem. The intelligent software and ultra-compact portable form factor design make it an ideal solution for a variety of industrial applications like field device ...

The Ursalink UC3x22 series is smart I/O product with an embedded cellular modem. The intelligent software and ultra-compact portable form factor design make it an ideal solution for a variety of industrial applications like field device ...

The Ursalink UC3x52 series is smart I/O product with an embedded cellular modem. The intelligent software and ultra-compact portable form factor design make it an ideal solution for a variety of industrial applications like field device ...

The Modbus module with 6 analog inputs and 2 relay outputs was developed for decentralized switching tasks. Suitable to monitor electrodes of leakage sensors or the fill level of fluid containers and to switch pumps or magnetic valves. ...

The module MR-SM3 is a smart meter component for building automation. Current, voltage, power and many other values can be captured by three 230 Volt current circuits. In addition, the device provides monitoring functions of for example ...

The Modbus module in an IP65 housing with 4 digital inputs and 2 relay outputs was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two ...

The 415U-2-C extends communications to sensors in local, remote, and difficult-to-reach locations. Designed with the Condor series long-range, high data speed wireless transceiver and standards-based native Ethernet protocol over the ...

The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST ...

The device DAT10014 converts up to 4 analogue input signals into engineering units in digital format. The data are transmitted with MODBUS RTU / MODBUS ASCII protocol over the RS-485 network. It is possible to connect on input RTD, ...

The device DAT10015 converts up to 8 analogue input signals into engineering units in digital format. The data are transmitted with MODBUS RTU / MODBUS ASCII protocol over the RS-485 network. It is possible to connect on input 4 voltage ...

The EZC-D102-XN is a 16-channel Digital Output slave module of TPM EtherCAT® Add-on modules with NPN type. EZC-D102-XN can support local CAN bus through CAN Coupler, EZC-N100. With EtherCAT® control, it will lead to fast ethernet and ...

The EZC-D102-XN is a 16-channel Digital Output slave module of TPM EtherCAT® Add-on modules with NPN type. EZC-D102-XN can support local CAN bus through CAN Coupler, EZC-N100. With EtherCAT® control, it will lead to fast ethernet and ...

Our remote I/O expansion units communicate with Modbus TCP/RTU and IEC 61850 GOOSE, allowing to extend and distribute the acquisition and command capabilities of any master device. We offer flexible I/O board configurations to fulfill ...

AC500 - S500 I/O modules We believe expanding or adding field devices should be quite simple. Therefore we develop multifunctional and software configurable I/O modules and provide numerous basic I/O modules with different channels, ...

AC500-S Safety PLC - S500 I/O Modules All S500 I/O modules comply to SIL3 (IEC 61508, IEC 62061, IEC 61511) and PL e (ISO 13849-1) functional safety standards. These modules can be used centrally as well as in the remote rack via PROFINET ...

AC500-XC - S500 I/O modules We believe expanding or adding field devices should be quite simply. Therefore we develop multifunctional and software configurable I/O modules and provide numerous basic I/O modules with different channels, ...

The input and output signals can either be wired centrally to the control unit or locally to the fieldbus couplers. As required, terminals can optionally be arranged side-by-side in a modular and scalable way on bus couplers (CANopen ...