Controlled pressure: 16 Pa
DN: 50 mm - 150 mm
... venting or aeration of reactors and vessels •Accurate response characteristic avoids compromise solutions, e.g. ball check valves •Easily adaptable through removal or adding of the weight rings •For very small set pressures of -120 ...
Richter Chemie Technik
DN: 65 mm - 125 mm
... Protection of valuable equipment against vacuum - Horizontal installation position - Types: not liftable, without drip cup liftable, with drip cup - Standard connection for welding - Optimal cleaning ...
Evoguard GmbH
Controlled pressure: 16 bar
DN: 0.25 in - 3 in
... Body material Brass PN (End) PN16 End BSP Female/Female Contact sealing EPDM ...
TECOFI
Controlled pressure: 13, 11, 10, 16 bar
DN: 25 mm - 100 mm
Weight: 9.8 kg - 48 kg
... SF20 Series DIN Flange Steel Pressure Relief Valves are mainly applied to such trades as petroleum & natural gas, chemistry, electric, metallury & burning gas. As the super-pressure protecting equipment. With high precision of action, ...
Controlled pressure: 10, 16, 25 bar
DN: 40 mm - 200 mm
... DJET safety relief valve TALIS offers the most effective solution for the protection of your networks against water hammer consequences. DJET safety relief valve protects ...
Controlled pressure: 3 bar
DN: 0.5 in
Controlled pressure: 3, 4, 4.8, 7 bar
Weight: 0.05 kg
... A series of presetted valves with G1/4 connection both as regulators spare part and for systems. Available for 3 – 4 – 4.8 – 7 bar presetted pressions. ...
OXYTURBO SPA
Controlled pressure: 250, 300, 750 psi
DN: 0.5 in - 6 in
... TECVAL manufactures Safety Valves and Safety-Relief Valves for various applications. Designed and manufactured according to international standards such API, ASME 1, & ASME VIII. Relief ...
Tecval
Controlled pressure: 16, 10 bar
DN: 0.38 in - 2 in
... - Using conditions : steam, compressed air, gas. Can be installed in any position. - Brass bodies - Interchangeable zinc plated spring. - Open exhaust - Metal/metal tightness (brass seat). - ISO 228-1 male gas thread - Setting range : 5 to 12 bar ...
Flow rate: 173 ft³/min
... Safety Valve Prevents the safety hazard of excessive pressure build up beyond the rating of the tank. ...
Controlled pressure: 40, 16 bar
DN: 20 mm - 150 mm
... Vertical Full-lift angle weight safety valve with flanged ends. The product is characterized by a high degree of tightness. Valves 570 may be applied to systems in which the pressure is from 0.1 to ...
ZETKAMA Sp. z o.o.
DN: 0.13 in
... Safety valve NA G 1/8 set Body material: Brass (1) Seal: NBR or FKM or GLT or EPDM or HNBR (2) Pressure regulator: Brass (3) Spring: C98 or INOX AISI 302 or INOX AISI 316 (4) regulator: Brass (5) Protection ...
NOSTRALI
Controlled pressure: 2,000 psi - 20,000 psi
DN: 46 mm - 180 mm
... Hydraulic safety valves are made according to API 6A. When oil and gas leaking or firing, used for security protect on well site, the control system includes low pressure control valves, ...
... AEA Safety valve is a valve that act as a protection of equipment from exploding or damaging and it is mainly installed in pressure vessels such as chemical plants, electric power boilers ...
Controlled pressure: 0.3 bar - 40 bar
DN: 20 mm - 150 mm
H+VALVES
Controlled pressure: 0.5 bar - 720 bar
DN: 10 mm - 50 mm
... Applications: Air Compressors Steam generators / Boilers Autoclaves Technical gases Natural gas and technical gas compressors Materials: AISI 316L Carbon steel ...
Coi Technology S.r.l.
... development have allowed PROTEGO® to develop a low pressure valve which has the same opening characteristic as a high pressure safety relief valve. This “full lift type” technology allows the valve ...
Controlled pressure: 0.2 bar - 40 bar
DN: 15 mm - 150 mm
... 130 Series Safety valves are also available as Relief valves. Relief valves, identified by the letter R after the type number, are devices with an operational function, having pressure-bearing ...
Besa S.p.A.
Controlled pressure: 30 bar
DN: 0.38 in - 3 in
Weight: 220 g - 7,200 g
... Enclosed discharge Relief Safety valve for over pressure in pressurized vessels and pipe systems . Direct spring actuating system. Male threaded inlet connection. Die cast brass-bronze body. Female threaded side outlet ...
Metalurgica Zaes S.L.
Controlled pressure: 0.3 bar - 414 bar
DN: 1 in - 10 in
... This range of spring loaded conventional and balanced safety relief valves is specifically designed for overpressure protection of unfired pressure vessel (ASME Section VIII application). Sizes and orifices ...
... Bellow Type Pressure Safety Relief Valves which are installed to release the excess pressure developed in a system like reactor vessels, pipelines due to a chemical reaction, thermal expansion etc. Our Pressure Safety ...
Controlled pressure: 0.1 bar - 500 bar
DN: 0.38 in - 2 in
... Safety- and Relief Valves, right angle, threaded Threaded Safety Valves, right angle; standard or full-lift- safety valves; event though as overflow- valves ...
Niezgodka GmbH
Controlled pressure: 100 bar
DN: 50 mm
Pressure: 1 bar - 250 bar
... For installation upstream of gas heat exchangers as a pressure safety guard for the entire heating circuit to avoid a pressure increase in the water cycle. Available from PN16 to ANSI1500 and in sizes DN25 up to DN200. ...
Heat Group
Controlled pressure: 16, 25 bar
DN: 15 mm - 200 mm
... STANDARDS OF MANUFACTURE EN 1092-1 DRILLING FLANGES STEEL EN 1092-2 DRILLING FLANGES IRON MATERIALS BODY FIG.450-451 – EN GJL-250 CAST IRON EN 1561 FIG.451B – BRASS CuZn40Pbs2Sn EN 12164 COVER EN GJL-250 CAST IRON EN 1561 OBTUBATOR DN15÷32 ...
Controlled pressure: 12, 13.2, 10.8 bar
... Please note: Only safety valves that have been set and sealed by us can be delivered with the component symbols, it is thus absolutely necessary to indicate the setting pressure in bar. As functional test, safety ...
Controlled pressure: 18 bar
DN: 0.13 in - 1 in
... FARBO, ever following the best performances, presents its safety valves series. Brass body and Viton® seals make them suitable for heavy applications which require working pressure up to 18 Bar and ambient temperature ...
... Cryogenic Safety Valves, angle type, brass, PN63, type tested TÜV-SV.1048. S/G Standard safety valve, with carbon filled PTFE valve seal Outlet: female thread Rc 3/8 ...
Wessington Cryogenics LTD
Pressure: 40 bar
... Type: Safety Relief valves Connections/Rating: Threaded BSP/NPT, PN-40 Dimensions: 1/2″ x 3/4″ to 2″ x 2″ Material: Stainless steel 316 L Applications: Steam, gases, vapour and liquids and cryogenic service TECHNICAL ...
TOSACA SA
DN: 10 mm - 25 mm
Pressure: 25 bar
... full lift or proportional, full lift weight loaded, spring types – cast iron GG-25, GGG-40, cast steel GS-C25, stainless steel – PN1,6 – 10 MPa – DN 20×32 – 400×500 – flanged or threaded ends – for air, steam, gases or marine use – DIN standards
VARIMEX-VALVES Poland Sp.z.o.o.
DN: 80 mm
Pressure: 0.2 bar - 40 bar
... flange- safety valve DN80/DN80 Einstelldruck 0,2 up to max. 40 bar for liquid and gaseous media made of cast steel 1.0619+N with lever product: - flange- safety valve temperature: ...
... Flange Full Lift Safety Valves can be used on systems where the discharge is relatively simple. The pressure in the discharge system can be atmospheric, at a constant level or where the pressure may build up to a maximum ...
Vatac Valves (Wenzhou) Corporation
DN: 0.5 in - 16 in
... for you! Types Ball Valves -Full Bore & Reduced Bore, Cast & Forged Steel, Side & Top Entry Butterfly Valves – Soft Seated & Metal Seated High Performance Gate Valves – Standard – Cryogenic – ...
Controlled pressure: 0 bar - 500 bar
... The system consists of one or more safety valves. Available Systems 3-1757 3-1517 3-1548 3-1758 3-1759 3-1760 Characteristics Apart from a satisfactory repeatability, the system under examination ensures ...
... diaphragm valve can be used in practical applications as a shut-off fitting, a safety valve and also in the 2/3-way version for distributing or collecting. The key to a long service life and reliability ...
... Explosion proof safety valve to protect inbreathing openings of storage tanks, vessels and pipes to prevent inordinate vacuum. Approved for flammable liquids of explosion group IIB3 with a maximum experimental safe ...
KITO Armaturen GmbH
Controlled pressure: 0.1 bar - 45 bar
DN: 0.38 in - 2 in
... V651 Series safety relief valves are produced as safety and relief type. Safety valves are pressure relief elements used to evacuate excessive pressure in industrial ...
Doruk Endustri Ltd.
Controlled pressure: 8 bar - 50 bar
DN: 12 mm - 19.5 mm
... Series 3030 and 3060 valves are safety accessories according to the definition contained in Directive 97/23/CE and are subject to the requirements of the Directive. These valves are conventional unbalanced ...
CASTEL
Controlled pressure: 6 bar - 10 bar
DN: 10 mm - 50 mm
... The RIEGER Safety valve Type SH prevents excessive pressure in steam and gaseous media in plant components and tanks. The set pressure is generally higher than the operating pressure of the system. Already at 10% overpressure ...
DN: 0.25 in
Flow rate: 50 l/h - 85 l/h
... The KBB is a fire safety shut-off valve for use on oil-burning equipment... The valve is installed in the oil supply pipeline outside the building with the sensor mounted firmly inside the appliance ...
Teddington Controls
the best suppliers