Gas safety valves
Controlled pressure: 20 mbar - 500 mbar
DN: 25 mm
If you have been searching for a safety release valve that you can use to reduce short-term pressure surges successfully and diminish the effects of gas leaks, this is the product for ...
Controlled pressure: 18 mbar - 550 mbar
DN: 25 mm - 100 mm
... regulators have safety valves which will slam shut in the event of emergencies, such as the gas reaching too high a pressure level. The valve works to protect any fittings ...
Controlled pressure: 230 mbar - 8,000 mbar
DN: 40 mm - 250 mm
This product has hydraulically actuated class A gas safety valves to EN 161 used for automatic shut-off. It shuts off when unstimulated for gas and air, or even biologically ...
Smart Safety Relief Valve for venting excess pressure, up to 45 bar, display of status „open“ or „closed“ • - spring- loaded, direct-acting safety relief valve • - ...
Controlled pressure: 45 mbar - 1,000 mbar
DN: 0.75 in - 1 in
Flow rate: 0 m³/h - 100 m³/h
The main purpose of the safety relief valve SL 5 is to relieve small pressure increases and quantities in the controlled system to prevent the safety shut-off valve from ...
Controlled pressure: 3 bar
DN: 25.4, 1.5, 2 mm
Flow rate: 300 m³/h
The S50 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses ...
Controlled pressure: 8 bar
DN: 160 mm
Flow rate: 30,000 m³/h
The S100 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses ...
Controlled pressure: 0.5 bar - 30 bar
DN: 8 mm - 20 mm
DISCHARGE SAFETY VALVE WITH CANALISED EXHAUST AND LEVER - PN 40 - STAINLESS STEEL 316
Controlled pressure: 1 bar - 45 bar
DN: 7 mm - 20.5 mm
Free Exhaust Valves - SA series The safety valves produced are of the direct loading type and are used to protect the components on which they are to protect the elements on which ...
Controlled pressure: 6 bar - 10 bar
DN: 10 mm - 50 mm
The RIEGER Safety valve Type SH prevents excessive pressure in steam and gaseous media in plant components and tanks. The set pressure is generally higher than the operating pressure of the system. ...
For steam, air or gas protection. Designed for durability, yet an economical choice for safety and relief applications. UV stamped; factory set and sealed. Choose for a variety of applications. STANDARD ...
Controlled pressure: 100 Pa
DN: 25 mm - 150 mm
SAFETY DEVICES PVS 803 PVS type slam shut valves are pilot-operated relief valves in which the opening and the closing of the main plug is controlled by a pilot device which is very ...
Controlled pressure: 2 bar - 485 bar
DN: 80, 59, 36 mm
Flow rate: 5.7 m³/h - 461.3 m³/h
Maximum operating pressure (bar) : 500 Gas compatibility : See commercial sheet
Controlled pressure: 2,000 psi - 20,000 psi
DN: 46 mm - 180 mm
Hydraulic safety valves are made according to API 6A. When oil and gas leaking or firing, used for security protect on well site, the control system includes low pressure ...
Controlled pressure: 4 psi - 22 psi
DN: 2 in - 3 in
High volume air relief valves designed for low pressure air and gas service. Rugged bronze construction features elastomer soft seating and TFE coated discs for dependable ...
Controlled pressure: 50 mbar
Safety Shutoff Valves Double safety for vacuum lines Contact a broken vacuum line and a leaky vacuum regulator on simultaneously, uncontrolled escape of chlorine gas. ...
... with a hermetic valve • In accidental functioning: ensure a safety flow through an opening in case of leakage • Alarm triggering or any safe action through dry contacts Technical ...
Controlled pressure: 16 Pa
DN: 50 mm - 150 mm
... venting or aeration of reactors and vessels •Accurate response characteristic avoids compromise solutions, e.g. ball check valves •Easily adaptable through removal or adding of the weight rings •For very small set ...
Controlled pressure: 0 bar - 14 bar
DN: 1.5, 2 in
The EMERSON BM7 SERIES is a disk slam-shut valve characterized as automatic isolating elements, which are suitable for installation as safety devices in regulating stations. This device has a high operation ...
Controlled pressure: 100 bar
DN: 8, 10, 15 mm
... : -200°C to 280°C Type 50 is a safety valve for universal use. It can be used for nearly any industrial application, e.g. in shipping and pipeline construction, the chemical and petrochemical industries, ...
DN: 0.5 in - 16 in
... for you! Types Ball Valves -Full Bore & Reduced Bore, Cast & Forged Steel, Side & Top Entry Butterfly Valves – Soft Seated & Metal Seated High Performance Gate Valves – Standard ...
Controlled pressure: 0.5 bar - 720 bar
DN: 10 mm - 50 mm
Applications: Air Compressors Steam generators / Boilers Autoclaves Technical gases Natural gas and technical gas compressors Materials: AISI 316L Carbon steel
Controlled pressure: 0.2 bar - 40 bar
DN: 15 mm - 150 mm
130 Series Safety valves are also available as Relief valves. Relief valves, identified by the letter R after the type number, are devices with an operational function, ...
Controlled pressure: 150 mbar
Flow rate: 1,200 l/h
The TESA 2394 range of flame safety gas controls have been designed for commercial catering applications. The TESA 2394 is a very versatile control with many configurations that can be chosen by the OEM. The ...
Controlled pressure: 0 mbar - 900 mbar
DN: 17 mm - 55 mm
This gas safety solenoid shut-off valve series class A - are DVGW approved to the Norm EN 161 and to EMC Electromagnetic Compatibility with CE product identification no. to meet industrial requirements ...
Controlled pressure: 16, 40 bar
DN: 15 mm - 200 mm
... sewage, gas, glycol, diathermic oil, industrial water, steam and other natural and aggressive media, depending on theresistance of materials usedfor the construction ofthe valve. FEATURES flange ...
Controlled pressure: 3,000 psi - 15,000 psi
DN: 16 in
Description Jereh Safety Valve is equipped with pneumatic, hydraulic or electric actuator, widely used in Christmas tree and surface manifold. In case of any emergency such as oil/gas ...
Controlled pressure: 0.3 bar - 40 bar
DN: 20 mm - 150 mm
Your suggestions for improvement:
Receive updates on this section every two weeks.