Single-point lubricators

Capacity: 0 ml - 15 ml
Pressure: 0 bar - 5 bar

Smallest lubricator in the world With only 15 ml of contents – grease or oil – the new lubricator offers a minimal, but continual amount of lubrication during the desired time setting (1–12 months). ...

simalube lubricates chains in precise and perfectly measured doses simalube lubricates chains in any industrial environment, efficiently and reliably. Continuous lubrication with simalube prevents premature damage, reduces maintenance ...

Capacity: 15 ml - 250 ml
Pressure: 0 bar - 5 bar

... grease or oil for periods of up to one year to roller and plan bearings, linear guides, gears and motors, spindles, shaft seals and chains. Once installed, simalube lubricators lubricate evenly, accurately ...

Pressure: 0 bar - 16 bar

... The operating temperature is -5°C to 50°C up to 16 bar, and from -5°C to 60°C at pressures up to 10 bar as long as the dew point of the fluid is less than 2°C at the minimum working temperature. Oil for lubrication is ...

Capacity: 37, 170 cm³
Pressure: 0 bar - 16 bar

» Adjustment screw » Check of the oil level through plastic cover openings Series MC lubricators are available with ports G1/4, G3/8 and G1/2. The bowls of these lubricators are ...

Capacity: 26, 37 cm³
Pressure: 1 bar - 16 bar

» Available with: transparent PA12 bowl or nickel-plated brass bowl for the small version (N1) Series N lubricators are available with G1/4 and G1/8 ports. The special type of design allows a vast range of applications ...

Capacity: 60, 125 ml
Pressure: 0 bar - 5 bar

SKF SYSTEM 24 Gas driven single point automatic lubricators The units are supplied ready-to-use straight from the box and filled with a wide range of high performance SKF lubricants. ...

Capacity: 250, 125 ml
Pressure: 0 bar - 5 bar

SKF SYSTEM 24 Electro-mechanical single point automatic lubricators The SKF TLSD series is the first choice when a simple and reliable automatic lubricator is required ...

Capacity: 125, 250 ml
Pressure: 0 bar - 5 bar

SKF SYSTEM 24 Cabled electro-mechanical single point automatic lubricators For applications that are occasionally in operation Cabled single point ...

Pressure: 0 bar - 45 bar

VEI-F Single-line distributor Medium: fluid grease Dosing volume in cm³/stroke: 0,01 … 0,3 Permissible operating pressure in bar: 45 Number of outlets: 2 … 5

Pressure: 0 bar - 120 bar

... of the chisel. The SKF Hydraulic Driven Lubricator features a patented internal design that performs well with chisel paste and the prevailing environmental conditions in which hammers operate. The lubricator ...

Pressure: 20 bar - 280 bar

... and benefits High output pressure enables provision of lubricant to progressive metering devices and distant lubrication points Easy to use Low maintenance Integrated control board for both impulse- and time-controlled ...

Capacity: 60, 125, 30 cm³

Klübermatic FLEX is a compact, ready-to-use lubricator. It can be used for diverse applications at temperatures between -20 °C and +60 °C. The lubrication interval can be selected in monthly increments between 1 and 12 ...

Capacity: 125 cm³

Klübermatic NOVA can be used for all applications between −20 °C and +60 °C. On the Klübermatic NOVA control unit, a discharge period from 1 to 12 months can be set by push-button. The control unit will then calculate the amount of ...

Capacity: 150, 60, 120 cm³

Klübermatic STAR VARIO is fully automatic and works independent of the ambient temperature. It dispenses lubricant with utmost accuracy over 1 to12 months. It consists of an electro-mechanical drive unit with LCD display with push ...

Capacity: 120 cm³
Pressure: 5 bar

Single point automatic lubricator The MONO point automatic lubricator is the most cost-effective solution alternative to manual lubrication. It ...

Capacity: 28 cm³
Flow rate: 700 l/min
Pressure: 0 bar - 15 bar

Airwork's Standard Lubricator features a total pressure rate of 15 bar. This lubricator's operating temperature levels range from -10 to 50 degrees Celsius. It also features a bowl capacity of 28 cm3, ...

Capacity: 1 cm³ - 90 cm³
Flow rate: 2,600 l/min - 8,200 l/min
Pressure: 0 bar - 15 bar

The XL1 Series, manufactured by Air Work, is a filter regulator that is suitable for packaging sealers, boxers, coders, wrapping, palletizers and filling equipment. This incorporates a 15 bar pressure rate, M4X14/M5X18/M6X20 wall clamping ...

Capacity: 60, 120, 240 ml
Pressure: 0 bar - 5 bar

is an electronically controlled single-point lubrication system, driven by a chemical reaction. The dispenser excels through user-friendliness and a good cost-performance ratio. This product is the right ...

Capacity: 60, 250, 150 cm³
Pressure: 7.5 bar

is a reliable, easy-to-operate lubricant dispenser with an electromechanical drive. Its precise delivery system makes Sololube equally suitable for the automatic lubrication of roller and friction bearings, gear racks, open transmissions ...

Capacity: 500 ml
Pressure: 0 bar - 10 bar

Electromechanical lubricator for oil The battery-powered G‑LUBE OIL is a refillable oil dispenser, ideal for lubricating chains, spindles and linear guides. The assembly and commissioning of the G‑LUBE ...

Capacity: 480, 240, 120 cm³
Pressure: 25 bar

... stroke pressure: 25 bar / 350 psi Batteries / Power: 3 x 1.5 VDC Alkaline AA-LR6 batteries Remote installation: Up to 8 m / single po

Capacity: 120, 240, 480 cm³
Pressure: 25 bar

is an autonomous refillable lubrication system for single or mutiple point use Remote installation up to 10 meters MEMOLUB® HPS is the leading product in our range. Settings of 1 week to 24 months through ...

Capacity: 120, 240, 480 cm³
Pressure: 25 bar

is a single or multiple point refillable lubricator which can be installed remotely up to 10 meters External power source 24V Settings from 1 week to 24 months through the MEMO rings ...

... adjusted manually by using the trapezoidal screw and bronze lead screw. FEATURES: Applied directly on the press it reduces the encumbrance area Movement with pneumatic actuator and support guide Ideal for a single ...