Temperature: 10 °C - 30 °C
... The SRP-10G0-10T0 calibrator is a source of high resistance, used as a standard in calibration and tests of analogue and digital insulation resistance meters. The setted resistance by the calibrator ...
Sonel SA
Temperature: -196 °C - 420 °C
Voltage: 9 V
... Ellab Temperature Standard ETS10 The traceable ETS allows for extremely accurate temperature measurements by converting resistance into temperature using its built-in algorithms. When connected to the ValSuite software, the LiquiCal bath ...
Temperature: -20 °C - 140 °C
Voltage: 110, 120, 220, 240 V
... The Tecal 140F is part of a new range of light-weight and portable field Dri-Block calibrators. This model operates from 45°C below ambient (typically -20°C) up to 140°C. All Tecal 140F models are offered with RS-232 communications ...
Techne Calibration
Temperature: 5 °C - 40 °C
Pressure: 20 psi - 40 psi
Voltage: 85 V - 265 V
... The Model T700U is a microprocessor based calibrator for precision, trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards ...
Teledyne API
Noise level: 94, 114 dB
... measurements. An acoustic
calibrator allows you to check your sound level meter or noise dosimeter before and after each measurement, ensuring your results comply with occupational noise regulations.
Standard ...
Pulsar Instruments
Temperature: 5 °C - 40 °C
Pressure: 1.03 bar
Voltage: 100 V - 240 V
... Portable and battery operated Results directly traceable to NIST Sierra's CalTrak® 500 is an accurate primary standard gas flow calibrator for all inert gases. The 500 is used for calibration and verification of: ...
Sierra Instruments
Humidity range: 0.02 %
Voltage: 0 V - 20 V
... VA700, Process Calibrator Volt / mA Calibrator. Volt/mA Calibrator is a source and measurement tool. This Calibrator is used to measure or output 0 to 24 mA DC current loop, and 0 to ...
Temperature: -196 °C
... The BL631 liquid nitrogen comparison calibrator is specially designed to calibrate standard platinum resistance thermometers (SPRT) and other temperature probes in extreme cold temperature. With the ability to calibrate ...
Balun Technology Co., Ltd
... very high precision and efficiency, according to ISO 16063-22 and ISO 17025. Key features Wide amplitude range: 1000 gn...100 000 gn (9.8 km/s²... 981 km/s²) Traceable to national standards ...
SPEKTRA Schwingungstechnik und Akustik GmbH Dresden
... • VC21D with clock output for the synchronization of narrow-band measuring systems • Traceable to national PTB standard, calibration to ISO 16062-44, factory calibration certificate included • Rugged design • Mains ...
Metra Mess- und Frequenztechnik in Radebeul e.K.
... - fast current impuls (<40ns) - fulfils standard IEC 60270 - light synchronised - weights just 290g ...
Temperature: -30 °C - 60 °C
Pressure: 45 psi
... FP-25–Field Flow Standards for PM Air Samplers Accurate air flow calibrations in any weather Audit flow rate, pressure and temperature with laboratory-grade accuracy in an instrument that won’t break down. Alicat’s FP-25 and FP-25BT (with ...
Alicat Scientific
Pressure: 16 bar
... Static Volume Method Water Flow Standard Device Categories : Calibration Systems and Standard Devices, Water calibration system Specifications • Flow rate range: (0 ~ 800) m3 / ...
Shanghai Powerbuilder Automation Technology Co. Ltd
Temperature: 1,000 °C
Voltage: 115 V - 230 V
... results in lower convection and ultimately lower uncertainty in your measurements. (Please specify voltage required) Standard insert: 1×Φ14mm, 1×Φ12mm, 1×Φ10mm, 2×Φ8mm ...
Voltage: 30, 300, 750, 100, 10 V
... Harmonic Standard Source and Calibrator (0.05 class) Item No.: 202004 Open protocol for software self-programming. AC voltage sources: 3x900V@3x25VA, accuracy 0.05% AC current sources: 3x30A@3x25VA, accuracy 0.05% 3-phase ...
Kingsine Electric Automation Co., Ltd.
Pressure: 200 bar
... Analogue Pressure Calibrator, Tradinco 8185 The analogue pneumatic portable calibrator Model 8185 is designed for the supply and measurement of high pneumatic pressures. Model 8185 can be used for calibrating and testing ...
... disassemble the heads • Measurement traceability • Data collection reports • Customized change parts can be manufactured TCT standard toolless mechanical interfaces: • Quick release male/female adapters for Zalkin H5 and H6 screw-on ...
Temperature: -25 °C - 50 °C
Pressure: 0 psi - 100 psi
Voltage: 110, 240 V
... of five solenoid valves (fitted as standard with 25, 50, 100, 200, 300 mm/hr intensity nozzles). This allows the operator to select from 31 different intensity combinations covering a wide range of calibration standards. Software The ...
Pressure: -1 bar - 400 bar
... Leak standards / test leaks For the simulation of leaks and for monitoring and adjusting leakage testing systems • various connection possibilities included • pressure ranges from -1 to 400 bar • leakage rates from 0.01 ...
... NBJS-100/200/300/500/1000N.m Torque Wrenches Standard Machine/ Calibrator DETAIL 1. Introduction →Used in measurement, calibration and verification for torque wrenches, torque screwdrivers or other appliance (torque ...
the best suppliers