Pressure: 17, 20 bar
Temperature: 210, 220 °C
... The GD-30 and GD-30S are compact, high-performance direct-acting valves. Economical to buy and use, it is ideal for those low- to moderate-flow applications where accuracy of +/- 10% is acceptable. The GD-30 and GD-30S are well suited ...
Armstrong International, Inc.
DN: 0.75 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 145 °C
... proportional motorised valve 3/4" inch made of stainless steel to control the flow in the system up to 6000 l/h with an setpoint of 0 - 10 volt FKM/FPM seal: - FKM/FPM setpoint: - 0 - 10 volt voltage: - 24V DC (+/- 10%) actuating ...
DN: 15 mm - 200 mm
... Ability: - 10000PCS/Mouth Silent Stainless Steel Swing Check Valve API 6D/ ANSI 16.5 B/ JIS 20K/JIS 10K /DIN Stainless Steel Swing Check Valve Application: The Check valve is used ...
Zhejiang Jieyu Valve Company
DN: 0.5 in - 2 in
Pressure: 16, 12.8 bar
Temperature: 120 °C - 200 °C
DN: 50 mm - 400 mm
... globe valve is a type of adopts a straight-through valve body and controls the medium flow by the disc moving up or down. This straight through stop valve is widely used for control of water, steam, ...
DN: 450 mm
... Electric actuated triple eccentric hard (metal) seal butterfly valve / perfect seal Features Hard seal valve - Triple eccentric and low torque design - Stem design: Available in square shaft for easy mounting ...
... temp is -20℃~+180℃, ambient temp is -20℃~+60℃. The valve body material is stainless steel, with a PTFE sealing material and a PA actuator cover. The applicable medium is air, liquid and steam under a controlling ...
Zhejiang Kangsaite Valve Co., Ltd.
DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -60 °C - 280 °C
... body threaded ball valves are available in sizes from DN8 to DN100 with BSP threaded end connections. Face to Face Dimensions are according to DIN3202-M3 and PN63 working pressure. Ideally suited to be used as a manual isolation valve ...
Doruk Endustri Ltd.
DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C
... The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear stem travel. There ...
Pressure: 6 bar - 10 bar
Temperature: 150, 130, 135, 121 °C
... process lines is achieved via the CIP/SIP capable leakage chamber of the RIEGER-double seat valve N7 (also called double chamber valve. The CIP/SIP valves control the steam inlet and ...
... - cles, viscous media, drain water, sludge, food etc (plastic granulates, sand or similar media on request) Not suitable for steam BODY • GG-25 (grey cast iron), epoxy coated (heat- treatment 190*C. 20min) • stainless steel 1.4408 SEALING ■ ...
DN: 0.5 in - 2 in
... Info Model No.: H152 Actuator: Manual Structure: Through Way Globe Valve Stem Thread Position: Inside Screw Stem Globe Valve Standard: JIS, ANSI, DIN Product Name: Bronze Globe Valve With Steel ...
DN: 15 mm - 50 mm
Pressure: 40, 16 bar
Temperature: -10 °C - 400 °C
... KLINGER KVN DN15-50 Piston valves, flange design. Features DN 15 - DN 50 piston valve valve rings KX-GT piston made of special niro-steel FTF dimensions acc. to EN 558, GR.1 flanges acc. to ...
KLINGER-SCHÖNEBERG GmbH
DN: 0.5, 0.75, 1 in
Pressure: 16 bar
Temperature: -10 °C - 165 °C
... This self closing globe valve features a solid bronze body and lever, with gland and FPM O-rings. This valve is well-suited to work for non-toxic, and non-inflammable liquids, gases, and steam. It ...
DN: 50 mm - 400 mm
Pressure: 16 bar - 40 bar
Temperature: 280 °C
... balanced straight-way valve for medium and very high flow rates | useable for liquids, gases and steam | body made of GGG-40 or GS-C 25 | high precision thanks to integral control behaviour | response time can be adjusted ...
MANKENBERG GmbH
DN: 0.25 in - 2 in
... BSP-Parallel FlowFull ConnectionsFxF ApplicationIndustry Stem configurationPacking Gland HandleLever BodyBrass ProductBall Valve Size 1/4" - 2' ...
... to our competition. BIOFLO® II diaphragm valves are compact, forged, and lightweight valves designed to meet the stringent requirements within high purity systems. Applications include sampling, drain ports, steam ...
DN: 1 in - 2 in
... Mark D & DA Series are single port, screwed-in metal-seated valves with unbalanced post-guided valve plugs, and push-down-to-close plug action used for high pressure applications. These valves are used ...
JORDAN VALVE
DN: 15 mm - 100 mm
Temperature: -20 °C - 300 °C
... Model NO.: Q41F Connection Form: Flange Nominal Pressure: 150lb to 2500lb Structure: Floating Ball Valve Function: Blow-Down Valve Application: Industrial Usage, Water Industrial Usage Class: 150lb to 2500lb Application ...
Pressure: 0 bar - 64 bar
Temperature: -20 °C - 180 °C
... Stainless steel ball valves - 110 series Technical features - stainless steel AISI 316 body - stainless steel AISI 304 handle - O-ring and ball sealings in PTFE - maximum working pressure : 64 bar (40°C) - working temperature ...
SENGA
DN: 15 mm - 400 mm
Pressure: 16 bar - 640 bar
Temperature: -196 °C - 550 °C
... The 810D Series cage single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide adjustable range, high flow characteristic ...
SuZhou KoSa Environmental Protection CO.,LTD
Pressure: 6, 10 bar
Temperature: 0 °C - 240 °C
... pressure tight chamber valve is flanged directly at the reactor inlet. - Continuous entry in a pneumatic conveying system in combination with the solids blow through rotary valve, that is fixed directly below the chamber ...
DN: 15, 20, 25 mm
Pressure: 42 bar
Temperature: 426 °C
Complete SS construction, AISI 304, (Suitable for blowing out dirt from strainer element)
Pennant Engineering
DN: 0.5 in - 2.5 in
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 250 °C
... Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for steam, gases and liquids for reduce pressure in lines, available in different materials and pressure ranges. ...
EFSVALVES
... Circulation control valve Tasks Circulation control valves regulate the flow rate during drum circulation on forced-flow steam generators. Versions Forged valves in straight, angled ...
Welland & Tuxhorn AG
DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C
... PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. All three valves ...
PCI INSTRUMENTS LTD
DN: 15 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C
... Angle globe valve in PN16 with stainless steel trim. ...
Dansk Ventil Center A/S
DN: 0.25 in - 1.5 in
Pressure: 10,000 psi
Temperature: 200 °F
... All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Slotted spring pin to prevent accidental loosening Vinyl dust cap for ...
NOSHOK
DN: 32 mm - 1,000 mm
Pressure: 20 bar
Temperature: -35 °C - 110 °C
... The VTB200 series Butterfly valve is different because of its price and quality. The Butterfly valves can be used for many different applications and media. The body is made from cast iron with an epoxy coating, the ...
DN: 10 mm - 80 mm
Pressure: 40 bar - 100 bar
Temperature: -20 °C - 150 °C
... -OFF valve for: chemical products, for water and pneumatic installations, gas, water, vacuum. For steam applications, working pressures may be reduced and special seals required. For special applications please check ...
EFFEBI
DN: 0.5 in - 6 in
Pressure: 15 psi - 50 psi
Temperature: -20 °F - 250 °F
... Clark Globe Valves 1/2"through 2"are bronze body, NPT screw sort, and are appraised for ANSI Class 250 working pressures. The working temperature ranges from 20° to 250°f. The valve stems are stainless steel and valve ...
DN: 0.25 in - 2 in
Pressure: 2,000 psi
Temperature: -50 °F - 500 °F
... Threaded, Steam Rated 250PSI WSP/2000PSI) Valtorc's series 120 ball valve is available in threaded end connections and is ideal for any steam service environment. With 250PSI WSP and up to 2000PSI ...
DN: 25 mm - 500 mm
Pressure: 1.6 bar - 10 bar
Temperature: -46 °C - 650 °C
... R2 series valve, V-shaped notch has a similar equal percentage characteristics, suitable for the regulating or shut off service of slurry, fiber or the fluids easy to crystallization. The actuator for R1 series valve ...
Our animal feed solutions help you produce top quality feed and to make economical use of your raw materials and energy. As a technology partner with long-lasting experience in the industry, we support you in every aspect of the production of reliable ...
DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... mounting of bonnets not wetted to avoid seizure and leaks Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life Metal valve seat with leak-tested tightness in ...
DN: 150 mm - 2,500 mm
Pressure: 5 bar
Temperature: 1,000 °C
the best suppliers