DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C
... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / VITON Circumstance Temp: -10°C to 70°C Actuator Information > - Life: More than ten million cycle > - Other Technical Data: Available Available on request Adjust Stroke Limiter ...
DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C
... Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Body Material: - SS ASTM A351 Grade CF8 / CF8M > Seal: - PTFE / PEEK / VITON Actuator Information > - Cover: Nylon Glass-Filled (Corrosion résistive) with SS Liner > ...
DN: 2 in
Pressure: 4.5 bar - 7 bar
Temperature: -10 °C - 180 °C
... > - Port: Refer below technical data sheet (Available BSP / NPT) > - Body Material: SS ASTM A351 Grade CF8 > - Seal: PTFE / VITON > - CircumstanceTemp: -10°C to 70°C > - Leakage: As per ANSI B16.104 - 1976Teflon seating class IV. For other soft seating ...
DN: 0.25 in - 1 in
Pressure: 0 psi - 5,000 psi
Temperature: 70 °F - 1,200 °F
... Our Model 807 control valve is a market leader because of its reliability, flexibility and durability. If your application requires critical control of liquid or gas flow, the RCV 807/752 is a trusted, high performance solution. This ...
Badger Meter
DN: 15 mm - 100 mm
Pressure: 63 bar - 100 bar
Temperature: -40 °C - 200 °C
... excursions to which the valve is subjected Greater precision in the alignment of axes due to a unique positioning in the process machining from raw material to finished valve Longer lifetime of the valve Less ...
OMAL Spa
DN: 80 mm - 300 mm
Pressure: 40, 25, 16, 10 bar
Temperature: -50 °C - 450 °C
... Triple offset valve as wafer type butterfly valve for high pressure and temperature loads. Wafer style for installation between flanges EN 1092, PN 10/16/25/40, PS 25, ASME Cl 150/300, PS25 Vacuum up to 1 mbar FireSafe ...
DN: 0.375 in - 2 in
Pressure: 0.2 bar - 20 bar
Temperature: -60 °C - 225 °C
... resistant stainless steel provides a solution. The sealed and gas-tight design covers an even wider application range. The valves can be conveniently adjusted or aligned using the external adjustment, which means that perfect alignment ...
Goetze KG
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once the fluid temperature increases back to the set-point, the valve will modulate ...
Thermomegatech
... Series 2600 ASME NB Certified: Air, Steam & Water European CE Approved Sizes 1″ X 2″ to 20″ X 24″. Actual orifice areas from 0.150 to 176.7 square inches. Pressures from 15 to 6000 psig. Temperature range from -450° F to +1500° F. ...
DN: 0.5 in - 2 in
Pressure: 2 MPa
Temperature: -20 °C - 120 °C
... Brass threaded motorized control valves of ES100/ES150 and BL220/BL350 series apply to HVAC (heating, ventilation, and air conditioning), and building automation systems. Once the motorized control valves receive signals ...
Taloar
DN: 0.5 in - 4 in
Pressure: 10 bar
Temperature: 150 °C
... VPA sampling valves are designed to take samples aseptically, thanks to their configuration they can be sterilized with pure steam by SIP process or washed by CIP process, to create a protective barrier on the diaphragm ...
AERRE INOX Srl
DN: 0.5 in - 1 in
... B6301 2-Piece, Full Port, Bronze Ball & Waste Ball Valves are used in commercial, and industrial applications. It features a drain port to allow for draining or venting of downstream line when valve is in the off position. ...
Temperature: -18 °C - 343 °C
... The FL-HT gate valve is part of the F Series of valves, which have been supplied for production and drilling service since 1958. Many of the features of the FL-HT gate valve are common to our original ...
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon steel PN 40 - ...
Mival
DN: 25 mm - 500 mm
Pressure: 10 bar - 50 bar
... to be avoided at all cost. Somas ball valve is designed to take care of this. The valve is a full bore, flanged ball valve with cylindrical bore made in dimensions from DN25 to DN500. DESIGN Somas ...
SOMAS
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C
... horizontal (in relation to shaft) Materials Case : brass (DIN EN 12165, CW617N) Valve ball : stainless steel (EN 10088-2) Valve shaft : stainless steel (EN 10088-2) Valve shaft gasket : 2 x EPDM O-ring Gasket ...
DN: 2 in - 12 in
Pressure: 200 psi
Temperature: 225, 250 °F
... The NIBCO® international wafer type butterfly valve provides in-line bubble-tight shutoff at 200 PSI, recommended for quick installation and removal from piping. The valve performs well in commercial applications including ...
NIBCO
DN: 15 mm - 500 mm
Temperature: -29 °C - 500 °C
... treatment, sludge, saturated steam, super‑heated steam, high temperature, high velocity, powder (PP.PE) Options • Ball surface hardening process • Extension bonnet • Jacketed ball valve • Special tests ...
Pentair Valves & Controls
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 230 °C
... worldwide. Modern precision manufacturing methods and the very best materials guarantee ROCKY valves to be of the highest quality and reliability. TPC valves and accessories were primarily developed for the rationalization ...
AIRTEC Pneumatic
DN: 15 mm - 300 mm
Pressure: 160 bar
... Approved by German Technical Inspectorate
RTK Regeltechnik Kornwestheim
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C
... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal and industrial ...
DN: 15 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 300 °C
... Body material Cast iron Check valve material Stainless steel PN (End) PN16 End Flanged Contact sealing Métal/Métal Operating system Handwheel ...
TECOFI
DN: 0.25 in - 2 in
Pressure: 255 bar
Temperature: -20 °C - 250 °C
... 2 pièces bail valve 1500lbs forged carbon Steel with full bore for Chemical and Pharmaceutical industries, petrochemical industries, hydraulic installation, heating and compressed air. For fluids at high pressure and high température. PTFE ...
SFERACO
DN: 8 mm - 10 mm
Pressure: 0.4 bar - 17 bar
Temperature: 300 °C
... he ADCA P7 series pressure reducing valves are direct acting, spring loaded, diaphragm sensing balanced plug regulators designed for use with steam, nitrogen, compressed air, water and other gases and liquids compatible ...
VALSTEAM ADCA Engineering S.A.
DN: 2 in - 24 in
Pressure: 16 bar - 250 bar
... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically made from ...
Athena Engineering S.r.l.
DN: 15 mm - 20 mm
Pressure: 1.6 MPa
Temperature: -20 °C - 320 °C
... * In strict accordance with the standard of GB, JB, JIS, ANSI, KS, BS, DIN, API and etc. * Certification: ISO9001, BSCI, CE, ROHS, FCC, FDA etc ...
the best suppliers