Wastewater valves

DN: 800 mm
Pressure: 0 bar - 10 bar
Temperature: 60 °C - 220 °C

... The central throttling elements are two segmented discs which glide and seal against each other. They are positioned in the valve body perpendicular to the flow direction. By rotating the moving disc on the fixed disc ...

DN: 13 mm - 65 mm
Pressure: -0.9 bar - 30 bar
Temperature: -60 °C - 200 °C

... architecture means valve bodies and actuators can be freely combined. The modular product concept makes it easier to modify and maintain systems without having to remove the entire valve. • Robust ...

DN: 6 mm - 25 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 150 °C

... applications: the pneumatic pinch valve VZQA with silicone diaphragm comes in a normally open (NO) variant with a declaration of conformity in accordance with Regulation (EC) No 1935/2004 as well as FDA 21 CFR 177.2600. ...

Pressure: 0 bar - 40 bar
Temperature: -40 °C - 180 °C
Flow rate: 0 m³/s - 0 m³/s

- Connection 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" - G thread or NPT thread - Pressure range 0 ... 40 bar - Valve function 2/2 Normally Closed (NC) - Use with slightly contaminated media also possible - Use for steam ...

DN: 50 mm - 1,200 mm
Pressure: 25 bar
Temperature: -40 °C - 200 °C

Soft seated double flanged butterfly valve designed for high pressure applications. The combination of vulcanized liner and thrugoing shaft allows pressure loads up to 25 bar. FEATURES- Butterfly valve ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

... GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. The High-Flow ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C

The GEMÜ 487 Victoria soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox depending on customer requirements. The butterfly valve is available in nominal sizes DN 25 ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

... saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... prevent any risk of corrosion. - New valve body internal design. Substantially higher flow coefficient and lower pressure drops. The degree of efficiency reached has also enabled the size and weight of the valve ...

Pneumatic Valve is utilized by compressed air to control the gate open and close. It can be remote controlled and good for non-pressure environment or dirty water. The air pressure setting of the air compressor ...

Pressure: 10 bar - 25 bar

TRS & TRL are special types of solf sealing gate valves design for waste water sewage and corrosive applications. TRS/TRL - PN10/16 TRL - PN25 TRS Gate Valve is design for working pressure of 25 bar. Suitable ...

DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C

PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding media and environments ...

DN: 80 mm - 200 mm
Pressure: 10 bar - 16 bar

DN 80 - 200 PN 10 - 16 Body: EN-JL 1040 Coating: Epoxy Specially designed air valve required for waste water and sewage. Simple and robust design Air quantity can be adjusted precisely Large free space between float ...

DN: 40 mm - 1,200 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

... possible misalignment and reduces overall height. SIDE FLANGE: Connection compatibility design allows RBV010 Series Butterfly Valve to be installed between flanges of DIN PN 10/16, BS and ASME Class 150 simultaneously. Bi-Directional ...

DN: 50 mm - 350 mm
Pressure: 16 bar
Temperature: -40 °C - 200 °C

Flapcon® BV40 series Double Flanged type butterfly valves are manufactured from Ductile Iron, Steel and Stainless Steel castings. The BV40 Series with concentric design and vulcanized rubber gasket material options are ...

DN: 200 mm - 2,000 mm
Pressure: 2.5, 6, 10 bar
Temperature: -40 °C - 1,100 °C

• Double flange damper is used as a control or shut-off valve intended for operation with air or process gases, • Lamellar sealing suitable for dusty gases, • Possibility of customising face to face length and flange ...

DN: 50 mm - 1,200 mm
Pressure: 3 bar - 10 bar
Temperature: -30 °C - 200 °C

... lines containing fibrous particles and liquids with suspended solids. • Main Application Areas are Pulp&Paper Industry, Wastewater Treatment Plants and Under Silo.  • Bonneted versions are available for vacuum and pneumatic ...

DN: 50 mm - 200 mm
Pressure: 3 bar - 10 bar
Temperature: -30 °C - 200 °C

... Knife Gate Valves are widely used, especially in fluids containing fibers and particles. Its main usage areas are; paper industry, waste water lines and bottom silo applications and lines containing solid particles. V301-V302 ...

DN: 50 mm - 600 mm
Pressure: 3 bar - 10 bar
Temperature: -30 °C - 120 °C

V306 Series slurry knife gate valves are monoblock type, bidirectional design with easy replaceable dual side metal reinforced rubber sleeves suitable for handling of abrassive slurries in mining applications, wastewater ...