Sludge valves

DN: 25 mm - 300 mm
Pressure: 10 bar - 40 bar
Temperature: -40 °C - 220 °C

This ball sector motor valve is used for shut-off and control applications especially with contaminated, abrasive and viscous fluids. This series is characterized by extremely high rangeability (300:1) and a high flow ...

DN: 25 mm - 100 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 220 °C

This ball sector motor valve is used for shut-off and control applications especially with contaminated, abrasive and viscous fluids. This motorized control valve is suitable for the use in potentially ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 120 °C

In contrast to other valve designs, only two diaphragm valve components come into contact with the operating media: the diaphragm itself and the valve housing. The long service life, ...

DN: 50 mm - 600 mm
Pressure: 1,035,000, 700,000 Pa
Temperature: 0 °C - 120 °C

... knife gate valve combines a low maintenance design with a wide range of available materials, making the valve suitable for a variety of applications. Key features/benefits Unibody design and rugged ...

DN: 80 mm - 1,350 mm
Pressure: 1,035,000, 700,000, 1,400,000 Pa
Temperature: 0 °C - 120 °C

... and corrosion resistance, the Isogate® WB series heavy duty slurry knife gate valve combines a low maintenance design with a wide range of available materials making the valve suitable for a variety of ...

DN: 80 mm - 900 mm
Pressure: 2,070,000 Pa

... heavy duty knife gate valve is designed for abrasive applications. The robust design and heavy duty construction of our Isogate® WH series delivers greater reliability and longer life in heavy duty slurries compared to ...

DN: 50 mm - 1,600 mm
Pressure: 10, 6, 4 bar
Temperature: 120 °C

... sister company in Sweden Stafsjö Valves develop and manufacture high performance shut-off valves for pulp lines in pulp and paper mills, mineral processing and tailing systems in the mining industry, ...

DN: 50 mm - 600 mm
Pressure: 10 bar
Temperature: 120 °C

... sister company in Sweden Stafsjö Valves develop and manufacture high performance shut-off valves for pulp lines in pulp and paper mills, mineral processing and tailing systems in the mining industry, ...

DN: 50 mm - 1,600 mm
Pressure: 4, 16, 10, 6 bar

... sister company in Sweden Stafsjö Valves develop and manufacture high performance shut-off valves for pulp lines in pulp and paper mills, mineral processing and tailing systems in the mining industry, ...

DN: 1 in
Pressure: 0 bar - 6.8 bar
Temperature: 0 °C - 100 °C

... SMDVM Rolling Diaphragm Valves are ideal for applications that demand high Cv flow factor. These valves feature a smaller footprint required by cost-conscious customers. Universal fittings allow customers ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... prevent any risk of corrosion. - New valve body internal design. Substantially higher flow coefficient and lower pressure drops. The degree of efficiency reached has also enabled the size and weight of the valve ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

DN: 15 mm - 125 mm
Pressure: 10 bar

Safety hand wheel with locking positions Visual position indication Zero dead leg valve Suitable for slurries and abrasive media High viscosity or solid content applications Available with DIN backing ...

DN: 15 mm - 125 mm
Pressure: 10 bar

Safety hand wheel with locking positions Visual position indication Zero dead leg valve Suitable for slurries and abrasive media High viscosity or solid content applications Available ...

DN: 15 mm - 125 mm
Pressure: 10 bar

Safety hand wheel with locking positions Visual position indication Zero dead leg valve Suitable for slurries and abrasive media High viscosity or solid content applications Available ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

DN: 50 mm - 2,000 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

Di Nicola manufacture gate valves in malleable iron , ductile iron and high nickel alloys for extreme corrosion for over fifty years with sizes from 40 to 1600 mm and nominal pressure 2.5 bar till 25 bar . Di Nicola gate ...

DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C

PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding media and environments ...

DN: 25 mm - 1,600 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 200 °C

Centric butterfly valve with an elastomer liner, available as wafer, lug or U-section type. Engineered and manufactured for more than 30 years in Spain, Desponia® is built for long-lasting use in highly demanding environments ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 20 bar
Temperature: -40 °C - 200 °C

Centric butterfly valve with an elastomer liner, available as wafer, lug or U-section type. Engineered and manufactured for more than 30 years in Spain, Desponia® plus is built for long-lasting use in highly demanding ...

The 0 series Ported Knife Edge Gate Valves from Petrosystem is used for controlling pumps with pins and external particles. It can handle liquids with hard particles such as solid phosphoric acids and other similar fluids. ...

'0' Ported Knife Edge Gate Valves are best when handling Pulp containing PINS, FOREIGN Particles. Fluids like SOLID PHOSPHORIC ACIDS ROCK SLURRY and similar Fluids containing HARD Particles can be easily handled. Sizes: ...

DN: 10 mm - 250 mm
Pressure: 2 bar - 6 bar

... operated Pinch Valves. What are the benefits of air operated pinch valves? Free flow of product, minimum frictional resistance, 100% leak free, no blockages and low net weight are among the most important ...

DN: 15 mm - 1,200 mm
Pressure: 3 bar - 40 bar

... process causes any incrustations inside the sleeve to break away. This means that the manual and control Pinch Valve is a practically blockage-free valve solution. Furthermore, even larger solid particles ...

DN: 15 mm - 200 mm
Pressure: 16 bar - 160 bar

Metal seated ball valve design with three piece fixed ball structure for easy maintenance and replacement, The seat seal with wear-resistant high temperature properties made of a metal-to-metal sealing form by different ...

DN: 50 mm - 800 mm
Pressure: 10 bar - 40 bar

Metal seated butterfly valve the sealing surface has features as wear resistance, corrosion resistance and long service life etc. End connection have wafer type and flange type, can fit to high temperature and transport ...

DN: 50 mm - 800 mm
Pressure: 10 bar - 40 bar

Metal seated butterfly valve the sealing surface has features as wear resistance, corrosion resistance and long service life etc. End connection have wafer type and flange type, can fit to high temperature and transport ...

DN: 8 mm - 50 mm
Pressure: 16 bar
Temperature: -20 °C - 150 °C

... pneumatic actuator and valve into one body, eliminating packing glands, actuators and mounting kits. There are no exposed moving parts, eliminating pinch points and increasing operator safety. Since the actuator is part ...

DN: 50 mm - 700 mm
Pressure: 16 bar
Temperature: -20 °C - 110 °C

Flapcon® GA10 series Resilient Seated Gate valves are manufactured in accordance with DIN 3202 / F4 Standard. The gate valves are produced in short dimensions and occupy a small space on the line, which ...

DN: 50 mm - 800 mm

GA30 Series valve contains a disc or gate that slides into the path of the flow to block the fluid path and out of the way of the flow to reopen the path. Gate Valve Prod Gate valves ...

DN: 0.5 in - 6 in
Pressure: 150 psi - 2,500 psi
Temperature: -20 °F - 1,000 °F

... spherical ball. These basic features enable the valve to operate smoothly and efficiently at high or low temperatures and in slurries. The ball, cage and stem can be easily replaced in-line without removing the valve ...

DN: 2 in - 30 in

... Rotary Control Valve Product Category: M&J CONTROL VALVES This valve offers the highest Cvs of any competitive valve in the wide open position, yet gives modulating ...

DN: 1 in - 2.5 in

TECVAL Boiler Blowdown Valves blow down sludge formed in steam boilers. Devices in grey iron or steel, sizes range from 1" to 21/2", threaded or flanged, with a quick, slow, or automatic opening mechanism.

DN: 40 mm - 300 mm
Pressure: 0 bar - 10 bar
Temperature: 120 °C

Cast iron (GJL 250) PN 10 quick closing gate valve flat body bronze trim. Made in Italy. Fields of application: Industrial plants - Sea water - Shipyard - Fuel - Non-aggressive fluids - Tanks.

DN: 50 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: 120 °C

Cast iron (GJL 250) PN 16 gate valve ANSI 125 FF/BS 5150 FF face to face inside screw brass trim; high temperature. Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning ...