Strap shears

For sheet steel or aluminium cutting work, PREVOST pistol-grip metal shears have all the attributes for precise cutting. You can use them to make a clean cut, with no burring, generating just one offcut. The tool lets ...

Plate thickness: 2 mm

These cordless slitting shears have an economic, curve-compatible design which ensures distortion-free cutting. Rapid work progress is achieved due to the exceptional view of the cutting line via the open-fronted cutting ...

Plate thickness: 2 mm

The BSS 1.6 E is slitting shear that is utilized in cutting workpieces without leaving any distortions. It is integrated with left and right curve cut and free cutting, through the use of a continuous chip and QuickIN ...

Plate thickness: 1 mm

Fein BSS 1.6 CE are handy and curve compatible slitting shears with a clip chipper. They are equipped with a clip chipper which can remove chips at any point of the cutting process. Both right and left curved cuts are ...

Working length: 239 mm

The versatile 7802SA air cutting shear makes clean cuts in cold rolled steel up to 20 gauge without chips, making it the ideal tool for anyone in vehicle repair or machine shops.

Plate thickness: 1 cm

... • Eastman’s most powerful rotary shear with the highest torque and greatest RPM • Optional Pelican head designed for cutting lofted material • Optional swivel sharpener is equipped with a 30 degree ball tip shear ...

Plate thickness: 1 cm

The Chickadee™ is the smallest rotary shear available and is the perfect upgrade to, or replacement for, hand held shears. Powered by Eastman’s Perma-Field motor, the Chickadee™ has 40% more power ...

Plate thickness: 1 cm

The Long Handled Chickadee® has all the features of the standard D2 model, in addition to a long handle and a remote power switch. This is the ideal companion to any spreading machine for cutting out flaws, or when laying up fabrics. The ...

Plate thickness: 2, 1 mm

Battery machine for precise cuts The 10.8 V battery machine, without chip clipper, is particularly well-suited to cutting tasks without chip clipping during the cutting process. For example if you are cutting straight sheets to length ...

Plate thickness: 2, 1, 2 mm

Ideal view for precise cutting The cost-effective model without chip clipper is particularly well-suited to cutting tasks without chip clipping during the cutting process - for example, trimming straight sheets to length or cutting ...

Plate thickness: 2 mm - 4 mm

Specialized for versatile applications The TruTool C 200 Li-ion 18 V rechargeable battery features an open cutting head. This allows you to pull the machine out of the sheet easily. A chip clipper is not necessary. The steel cutting ...

Plate thickness: 1 mm - 3 mm

... sheet metal shears deliver high performance and reliability for cutting materials up to 5 mm thick. The series feature rapid cutting speed, optimum curve adaptability, and a deflector geometry that channels cut off materials ...

Working length: 50 mm

Multi-purpose shears with 2-component handles straight, with adjustable handle opening 205 mm Version: Made of stainless steel, with return spring. High-quality general purpose shears, with ergonomic ...

• For short, straight and figure cuts, small radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • ...

Working length: 25 mm

• With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • The special cutting head prevents the strip ends from shooting up • The flat lower part can be easily pushed ...

Working length: 200 mm

• For straight cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

Plate thickness: 5 mm

... 1600 Twin-headed Circular Shear and Flanging equipment is used for cutting disks from a square or an octagonal part during the beading treatment without detaching the part from the equipment. M3/1600 Twin-headed Circular ...

Plate thickness: 5 mm

This circle shear with circular blades are especially designed for cutting and beading circular parts. The unit is equipped with a hydraulic descent upper blade with a slowing-down tool for the execution of parts, which ...

Plate thickness: 6 mm - 10 mm

This 8/2600 circular shear flanging equipment features circular blades ideal for cutting and beading loops along with hydraulic clamping top blade descent. This can slow-down the tool used for beading processes or for ...

Schere für Verpackungsstahlband. Schere für Verpackungsstahlband 19-32 mm bis zu einer Dicke von 1,45 mm

Plate thickness: 0 mm - 50 mm

The Electric Belt Cutter, made by Flexco, is specifically designed as a fast and safe belt-cutting solution during operation. This cutter can manage all the belting types, for the softest of natural rubbers to the hardest configured solid ...

Working length: 512.1 mm - 651.8 mm

• Two-speed pumping system for rapid blade advance • Full 360° head rotation • Compact, lightweight design for reaching tight places • Twist release handle • High-pressure safety relief valve • Hinged flip-top head • Easy blade replacement • ...

The device is made from cast steel and its main body is a one-block design. It is reinforced in the points where the stress tends to be higher. It does not use any welded plate for this. The device comes with cutting blades that are made ...

The C 55 TRI is a metal cutting machine developed by TECMOR S.R.L.. The main body of this machine is in one block made from high quality cast steel materials In addition, the body has reinforced point wherein there is greater stress and ...

... wear-resistant steel and is constantly lubricated. This cutting machine is offered with maintenance tools such as pol for shear machines, and extra couple blades.

The Safety cutters, manufactured by Ferplast, are designed to be utilized for steel straps. It has a maximum width of 32 - 50 mm and comes has a weight of 0.8 - 1.3 kg.

Plate thickness: 1 mm
Working length: 240 mm

Aviation snips Product details For short, straight and curved cuts Edges with micro-serrations for slip-proof working Left cut model available as well

Plate thickness: 1 mm
Working length: 240 mm

Aviation snips Product details For short, straight and curved cuts Edges with micro-serrations for slip-proof working Right cut model available as well

Plate thickness: 1 mm
Working length: 240 mm

Aviation snips Product details No offset to blades, for short, straight and curved cuts with a large radius in both left and right directions Edges with micro-serrations for slip-proof working Available only in left cutting version

The SODIFA ESCA pneumatic round knife cutting machine features a blade width of 50, 70 or 86 mm with carbide tip counter blade. It was designed for cutting various materials with up to 20 mm thickness, such as composites, mat, fiberglass, ...

Plate thickness: 1 mm

The 9267 model is manufactured by Pro-tek, and is an air shear that has a 1.2 mm capacity on steel and 1.6 mm capacity on aluminium. It has a speed of 2,600 rpm with inlet of 1/4" NPT, which consumes air at 4 CFM. It ...

Plate thickness: 1 mm

The 9267S is manufactured by Pro-tek, and is a pneumatic shear that measures 24 cm in length and weighs 2.2 lbs. The unit has the capacity to machine steel objects that measure 3/64" and machine aluminum objects that ...

The P-2093 variable speed, straight handle pneumatic model comes with a rugged steel shear head to provide fast cutting of up to 1/2" backer board or fiber-cement board. Clean cut, with virtually no airborne dust. The ...

The P-2095 variable speed, straight handle pneumatic model comes with a rugged steel shear head to provide fast cutting of up to 5/8" fiber-cement siding, panel, and backer board. Clean cut, with virtually no airborne ...

Working length: 14 in

... edge of coated metals. These shears cut C.R. mild steel up to 18 gauge in straight or contour lines at over 300 inches per minute, most grades of stainless, aluminum to .080 and plastic or Formica up to 3/32" thick. These ...

With new improved blade design this heavy duty steel tool minimizes cutting force and blade wears thus producing smooth burr free cuts on wiring ducts and covers.