Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
Connect any device with Female NPT connection to the end of the hose • Non-swivel connection is set up for installing an alternative Quick-connect onto the hose • Sizes available in 1/8" and ...
Ralston
Inner diameter: 3 mm
Outer diameter: 6 mm
Pressure: 69,000 psi
... similar tube fittings without a wrench. • An excellent solution for connecting to tube fittings for pressure calibration, gas sampling, pressure reading and testing • A unique design that ...
Ralston
Inner diameter: 3 mm
Outer diameter: 7 mm
Pressure: 10,000 psi
... • Hose is hard to break and very flexible • Adapt from hose to virtually any device under test with only one connection • A corrosion resistant strain-relief on each hose ...
Ralston
Inner diameter: 38, 25, 32 mm
Outer diameter: 39, 45, 28 mm
Pressure: 1.5 bar
Flexible profile hose from a modified TPO with integrated cuffs Material: TPO Colour: Blue Roll lenght: up to 100,5 meters (Integrated double cuffs each every 1,5 meters) Applications: Cleaning ...
SCHAUENBURG Ruhrkunststoff GmbH
Inner diameter: 20 mm - 152 mm
Pressure: 15, 17, 20, 25, 30 bar
Temperature: -30 °C - 80 °C
Excellent resistant flat hose, made of rubber, double layer of polyester insert Material: Specially-formulated black nitrile rubber, double layer. Polyester thread insert, black Applications: Motopump discharge ...
SCHAUENBURG Ruhrkunststoff GmbH
Outer diameter: 20 mm - 500 mm
Pressure: 0.02 bar - 1.9 bar
Temperature: -40 °C - 100 °C
Light weight and flexible Polyurethane ducting, flame retardant Material: Polyether-Polyurethane, clear Single Length: 10 and 15 m Temperature Resistance: – 40° up to + 100° C Applications: Suction of ...
SCHAUENBURG Ruhrkunststoff GmbH
Inner diameter: 6, 9 mm
Outer diameter: 13, 16 mm
Pressure: 0 bar - 20 bar
Autogenous hose for acetylene, EPDM/SBR, red, Temperature range -20 °C to 60 °C, Hose Ø 13x6, PN max. 20 bar, Roll of 40 m Proven, flexible design acc. to DIN EN ISO 3821:2010 with ...
RIEGLER & Co.KG
Inner diameter: 25 mm - 75 mm
Pressure: 16 bar
Temperature: -40 °C - 100 °C
SYNTHETIC SPECIAL 500 Standard Fire-Fighting hose High quality lay flat hose for all fire-fighting operations. Circular woven jacket out of 100% high tenacity synthetic yarn with an inner liner made ...
Jakob-Eschbach
Inner diameter: 25 mm - 75 mm
Pressure: 16 bar
Temperature: -40 °C - 100 °C
SYNTHETIC SIGNAL Fluorescing Fire-Fighting hose Multi purpose lay flat hose especially for fire-fighting operations. Outside 100% high tenacity, colour dyed polyester yarn for better visibility. Circular ...
Jakob-Eschbach
Inner diameter: 25 mm - 75 mm
Pressure: 16 bar
Temperature: -40 °C - 100 °C
SYNTHETIC SPECIAL 500 COATED Robust Fire-Fighting hose High quality lay flat hose for all fire-fighting operations. With an additional synthetic PU-Coating outside for increased abrasion resistance. ...
Jakob-Eschbach
Inner diameter: 70, 45, 25 mm
Pressure: 17, 20, 30 bar
Delivered length: 60 m
... polyethylene. CHARACTERISTICS Its design and weight make it an easy hose to roll, transport and unfold. Its good flexibility, even at low temperatures, avoids problems of flow loss and hose management. Its ...
Borg & Beck is an established world-wide supplier of premium quality automotive components to the vehicle aftermarket, with over 100 years history of engineering excellence and OE pedigree. Some of the most important products on a commercial ...
SPIRAL TUBE SPIR « EQUIPPED » ARE AT EACH ENDS WITH A DIRECTIONAL FITTING AND A PROTECTION SPRING (301) SPIRAL TUBES “NU” ARE AVAILABLE AS FOLLOW 2,7 x 4 4 x 6 6 x 8 8 x 10 10 x 12
Inner diameter: 12.7 mm - 31.5 mm
Outer diameter: 20.6 mm - 45.7 mm
Pressure: 250, 275 bar
Specially designed to meet minimum bend radius Optimum cut and wear resistance Resistant to microbiological degradation Bonded tube and cover Lightweight compared to conventional rubber alternatives Increased lifetime Available ...
Inner diameter: 4 mm
Outer diameter: 8.6 mm
Pressure: 210 bar
... Long description - High pressure hose - Application - Central lubrication system for stationary and mobile applications Flexible connections between individual components - Properties ...
Inner diameter: 16, 21, 19, 25 mm
Outer diameter: 25, 37, 31 mm
Pressure: 16 bar
... oily floors. Complies with European standard. Can be supplied ready fitted and tested with end fittings. Overview Inner tube petrol resistant NBR, black, smooth Reinforcement synthetic textile, braided Cover oil ...
Trelleborg Industrial Hose
Inner diameter: 15 mm - 150 mm
Outer diameter: 16.1 mm - 154 mm
Pressure: 6 bar - 41 bar
PTFE-lined hose for chemical and process fluid transfer A fluoroplastic hose with a flexible convoluted PTFE liner. Corroflon has shallow convolutions which minimize the restriction ...
Watson-Marlow Fluid Technology Group
Inner diameter: 19.8, 25 mm
Outer diameter: 33.7, 40.8 mm
Pressure: 0 bar - 1,600 bar
Parker Polyflex High Pressure 2648N Hoses are developed for High and Ultra High Pressure applications. The excellent handling increases operator efficiency and long service life reduces costly down times. Superior safety ...
Parker Polyflex Division - Europe
Inner diameter: 6.3 mm - 25.4 mm
Outer diameter: 13.4 mm - 35.8 mm
Pressure: 8.8 MPa - 90 MPa
No-Skive braid Hose R161SN is designed for high pressure hydraulic applications in Petroleum base hydraulic and lubricating oils. temp range from -40 °C up to +100°C. Compatible with No-Skive fittings No-Skive braid ...
Parker Stratoflex
Inner diameter: 0.125 in - 0.375 in
Outer diameter: 0.32 in - 1.05 in
Pressure: 2,000, 1,250 psi
TH7 Thermoplastic hydraulic hose is recommended for petroleum, water-based and synthetic hydraulic fluids. Applications include mobile equipment, lubrication lines, blowout preventer control lines, farm and construction ...
GATES
Inner diameter: 44 mm - 150 mm
Outer diameter: 95 mm - 250 mm
Pressure: 20,000, 15,000 psi
... acid, sand and hydraulic fracturing works. Inner Tube：UPE and NR&SBR sythentic rubber Tube Type： full flow Reinforcement：many layers of high tensile super flexible spiral steel wire or steel cable Outer ...
Luohe Letone Technology Co., Ltd.
Inner diameter: 7.1 mm - 51.4 mm
Outer diameter: 12.3 mm - 60 mm
Pressure: 23 bar - 172 bar
... de-convolute the hose when using standard hydraulic inserts. Used in applications where constant Flexing, high temperatures or chemical resistance is paramount the Easyflex® hose offers a cost effective ...
Kongsberg Automotive
Inner diameter: 25 mm - 229 mm
Temperature: -40 °C - 130 °C
Delivered length: 4 m
Suction hose for fumes, hot air, gases up to 130ºC and for the automotive, railway, and naval industries.
KURIYAMA EUROPE
Inner diameter: 20 mm - 150 mm
Pressure: 10 bar
Temperature: 0 °C - 95 °C
The CALPEX pipe is a flexible, self-compensating, constant and heat-insulated system with a medium-sized pipe of cross-linked polyethylene. Underground connections are not required. These CALPEX ...
Brugg Pipesystems
Inner diameter: 8 mm
Outer diameter: 50 mm
Pressure: 0 bar - 200 bar
UES hotmelt hoses are the reliable connections between hotmelt system and application head. At standard lengths of up to metres, the adhesive is kept at the set temperature, which ensures smooth application. The robust ...
Inner diameter: 19, 25 mm
Outer diameter: 39, 31 mm
Pressure: 0 bar - 16 bar
Application: Suitable for use as tar sprayinq hose up to 180°C. Based on Norm EN 13482. The hose may be used for applications other than tar spraying at températures up to 110°C. Faature: The design with ...
Semperflex
Inner diameter: 0.375 in
Outer diameter: 0.563 in
Pressure: 200 psi
Reusable Rigid Fittings, Transparent Blue Constructed of Lightweight, Tough Reinforced Polyurethane 200 psi Working Pressure High Quality Brass Fittings Provide Strong & Durable Connection Fittings are Completely ...
Coilhose Pneumatics
Inner diameter: 1.6 mm - 25.4 mm
Pressure: 10, 100 psi
... tubing may balloon or rupture at high pressure. GORE STA-PURE Pump Tubing, Series PCS employs a unique, patented composite structure that overcomes this limitation. Even at pressures up to 100 psig, Series PCS tubing ...
W. L. Gore & Associates, Inc.
Inner diameter: 4 mm - 12 mm
Outer diameter: 6 mm - 16 mm
Temperature: -20 °C - 60 °C
... Features: Flame-retardant double-layer Polyurethane tube, suitable for welding workplace with sparks and under mining condition.Hose material is flame retardant Polyurethane, flame retardant grade V0(UL94-V0). 6. Application: ...
WENZHOU HOLID Automation Equipment CO.,LTD.
8T9AA FLEXOR 6 HF SAE 100 R6 - EN 854 R6 Tube : OIL RESISTANT SYNTHETIC RUBBER Reinforcement : ONE HIGH TENSILE TEXTILE BRAID Cover : ABRASION, OZONE AND HYDROCARBON RESISTANT SYNTHETIC RUBBER Application : LOW ...
ALFAGOMMA
... ® PEX hose---for sanitary product LIC ® Pex hose series have advantages as follows: high temperature resistance, high abrasion resistance, drinking grade, etc. Application : LIC ® hoses ...
Please specify:
Help us improve:
remaining