Capacity: 300 l
Length: 68 cm
Width: 68 cm
... + Test according to VDE 0472, A, B, C and EN50396 + Static and dynamic test with/without rotation + Continuous and/or intermittent tests Chamber volume: 300 liters Interior chamber ...
Anseros Klaus Nonnenmacher GmbH
... Mesocosms are partially closed experimental outdoor systems to be used for simulation of biological, chemical and physical processes. Mesocosms provide the opportunity to fill the methodological gap between laboratory experiments and field observations. They ...
... High and Low Temperature Humidity Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test ...
LISUN INSTRUMENTS LIMITED
Temperature: -40 °C - 150 °C
Interior length: 400 mm
Interior height: 450 mm
... High temperature test method. IEC 68-2-3 Test CA: Constant damp heat test method. IEC 68-2-30 Test CB: Alternating damp heat test method. IEC 68-2-14 Test ...
Guangdong Bell Experiment Equipment Co., Ltd
Temperature: 16 °C - 32 °C
Power: 220 W
External length: 2,570 mm
... mask. During the test, the coefficient of leakage of NaCl under the front of the mask to its content in the chamber atmosphere is calculated. Features: Universal platform for research & quality control of RPE: suitable ...
... Ranges of Application Quality Test of the Coating Through Accelerated Aging Under Treatment with Heat, Humidity and UV-Radiation. Highlights Smart setup for a uniform and homogenous treatment of all test-glasses Easy-to-operate ...
Capacity: 150 l
Temperature: -70 °C - 200 °C
Width: 1,100 mm
... Temperature Alternating Damp Heat Test Equipment Products Introduction: The cooling, low temperature, constant temperature and damp heat of the equipment provide the required cooling capacity. According to the different test ...
HCTE PTE. LTD.
Capacity: 150 l
Temperature: -70 °C - 150 °C
... controller with digital setting and display. ● SSR Control ensures precise temperature and humidity control. ● Optimized chamber structure for uniform temperature distribution. ● Interior is made of high quality corrosion resistant ...
Capacity: 120 l - 1,000 l
Temperature: 5 °C - 60 °C
... The Osworld Photostability Chamber is designed specifically to meet ICH and FDA requirements for Photo Stability Testing. Calibrated photon detectors measure lamp intensity on the product shelf. Lamp intensity (W/m² or Lux) and exposure ...
Osworld Scientific Equipments Pvt. Ltd.
... RF test chambers can be used to test various assemblies radio frequency ranges from 300 MHz to 6 GHz. In addition to communication modules, these also include products ranging from the field of radar ...
Capacity: 2, 6, 10 ft³
... . and 10cu.ft. Larger volume chambers are available on request. Atmospheric Sciences Automotive Dynamometers Engine Test Cells Environmental Chambers High Accuracy Medical Gas Metrology Pharmaceuticals R&D ...
Capacity: 150, 250, 450, 850, 1,340 l
Temperature: 10 °C - 55 °C
... The ERIS ALG INOX LED Eco and ERIS ALG ECOLine are climate chambers equipped with humidity and light control specifically designed for algae cultivation. These chambers provide precise conditions for the growth of algae. FEATURES • ...
Clitec
Capacity: 450 l
Temperature: 10 °C - 60 °C
Length: 700 mm
... compartment. Armored electrical resistance for the chamber heating system, as opposed to the cooling system. The humidity is increased by water from a tank being evaporated and fed into the interior chamber and is ...
... The test chamber is used for performing leak tests on mechanical fittings and pressure pipes under hydrostatic internal pressure while subjected to bending. We can also provide with a pipe tester for ...
AHP PLASTIK MAKINA
Capacity: 1,000, 220, 500 l
Temperature: -45 °C - 150 °C
... to meet more accurate test conditions.With the setting of temperature, it is easy to operate the refrigeration circuit. 4. The box door is equipped with a large observation window, which can observe the test status ...
Wuxi Guanya Temperature Refrigeration Technology Co. Ltd..
... and Indandion Development Chambers for Latent Fingerprints on porous surfaces NINcha is a climate chamber specially designed for developing fingerprints and similar marks on porous surfaces. There are three sizes of ...
Attestor Forensics GmbH
... Specifications Electronic Thermostat: Yes Digital temperature gauge: Yes Stainless steel construction (inside-outside) 304-18/8: No External Material: Galvanized steel Interior Material: Galvanized steel Overheat control: Yes Shelves: 0 Supply ...
elvem
Capacity: 600, 270, 108 l
Temperature: 35 °C - 55 °C
... Standard salt spray chamber (corrosion resistance test chamber) is the surface treatment for various materials, including paint, electroplating, inorganic and organic coating, cathode processing, anti-rust ...
Capacity: 80 l - 1,500 l
Temperature: -70 °C - 180 °C
Length: 500 mm - 1,000 mm
... Two O100mm test holes are designed on the left and right sides to facilitate cable connection. 9. - The compact structure and casters make it easy to move and equipped with adjustable support feet to determine the level of the test ...
Shinewell Test Solutions Limited
Temperature: -40 °C - 150 °C
Width: 600 mm
... Programmable Temperature & Humidity Test Chamber PTH225 is designed to create targeted environment/climatic conditions meant to test materials, components, and products for reliability and endurance The ...
Presto Stantest Pvt. Ltd.
... Used for speed drying purposes, moisture determination, conditioning. Same as C313N model, but with an internal capacity of 1200 liters. Internal ventilation. Door with 180° opening angle, equipped magnetic gasket and integrated heater against freezing. Shelves ...
Matest SpA
Temperature: -20 °C - 150 °C
Length: 450, 500 mm
Width: 400, 350 mm
... Benchtop Temperature humidity Test Chambers are Small, bench-top test chamber for simulating temperature and humidity environments. Included only temperature, temperature and humidity ...
Xi’an LIB Environmental Simulation Industry
... Environmental Chambers We offer an extensive range of Environmental Chambers for testing at non-ambient temperatures. The ETC Series environmental chambers are compatible with both static and dynamic ...
... Completely leak tight chamber which creates an atmosphere with a controllable relative humidity. This allows different materials to be adapted to the required conditions. Features: Analysis system for LF moisture transmitter ...
Capacity: 27 l - 405 l
Temperature: -80 °C - 260 °C
Length: 386 mm - 1,151 mm
... testing methods and materials. For the mounting of the chamber two systems are available. With the rail guide system, the chamber is fixed to the testing machine and can be driven into or out of the ...
... DESCRIPTION For decades, Magnetic Shield Corporation has helped customers shield rooms with our Perfection Annealed Co-NETIC® AA Nickel Alloy. We continue to have customers building their own magnetic rooms during new building construction or renovation. ...
Temperature: 0 °C - 49 °C
... Pressures Up to 30,000 psi (2,068 bar) The TestMaster® Model 300096HT Burst Test Chamber along with TestMaster® Hydrostatic Test Tooling provides a safe, efficient means of destructive and non-destructive ...
Capacity: 110, 250, 1,000, 6,000 l
... Line . 2 test chambers, 250 L each, BASE Line, ADVANCED Line and PREMIUM Line . 1 test chamber, 1000 L, BASE Line, ADVANCED Line and PREMIUM Line . 1 test chamber, ...
CLR
... The Most Powerful Dedicated Cell Irradiator Available The powerful Rad Source RS 1800·Q X-ray Irradiators are designed to investigate biological responses while providing maximum research versatility accommodating cell, tissue culture, seeds and many ...
... Corrosion Test Chambers (CCT) are designed to deliver the precise environmental test conditions demanded by modern industry. They are reliable, easy to operate and have a robust construction. Description C&W ...
CW Spec
Temperature: -70 °C - 150 °C
Length: 500, 600, 1,000 mm
Width: 750, 850, 1,000 mm
... ISO Factory Provide Combined Environmental Test Chamber For Environment Simulation Introduction The Integrated Environmental Test System is a combination of test chamber ...
Labtone Test Equipment Co., Ltd.
Capacity: 150 l - 3,000 l
Temperature: -70 °C - 180 °C
... ET-Series Environmental Test Chambers are designed with uncompromised features included in the system to meet your changing application needs of simulation of wide range of temperature, relative humidity etc., conditions ...
ENVISYS TECHNOLOGIES PVT LTD
Capacity: 512 l
Temperature: -70 °C - 150 °C
... Vertical + horizontal vibration high and low temperature three integrated box (JQTHV-500): mainly the combination of test chamber and vibration test system, temperature, humidity, vibration ...
Guangdong Jian Qiao Testing Equipment Co., Ltd.
Capacity: 408, 800 l
Temperature: -40 °C - 150 °C
Length: 1,900, 1,950 mm
... non-condensation tests can be performed; • b.Technology of temperature and humidity synchronization slope control of test sample non-condensation test. • c.Drying phase test conditions ...
DONGGUAN ITM-LAB MACHINE INC.
... The pre-compliance chamber by Siepel is a compact EMC test chamber that highlights a series of standards compliance such as EN, ANSI, MIL-STD and DO. In addition, it was created for smaller parent buildings ...
SIEPEL
Temperature: -1 °C - 20 °C
... For mortar prisms in three-gang moulds and cubes EN 196-1, ASTM C109 Made of stainless steel Electronic adjustable control for temperature and humidity 6 telescopic cabinet racks Technical data Curing temperature: +20°C +/- 1°C Humidity: 95% ± 3% Total ...
Length: 374 mm
Width: 520 mm
Depth: 320 mm
... range of sample holders make the process of assessing and grading the samples very clear. Pre-loaded images To grade other test methods including Martindale and Snag Pod. Standards driven For mace snag testing to the ASTM and ...
Temperature: -80 °C - 30 °C
... ASTM D1329. The Elastocon TR Tester has 6 test stations, is computerized, and performs the test automatically after the cooling media has been cooled down, and the samples have been mounted. The instrument ...
Elastocon AB
... of the HAST chamber and LED life evaluation system enables the highly accelerated life evaluation of a LED. ・ Test environment : temperature 120℃, relative humidity 85% ・Number of test channels in total ...
... The ETM Series by Wance provides different types of environmental chambers for addressing the demands of non-ambient tensile, compression and bending tests. The GDW200 is especially manufactured for ETM Type B and C series, ...
Shenzhen WANCE Testing Machine Co., Ltd.
the best suppliers