Temperature: -40 °C - 150 °C
Length: 1,720 mm
Width: 780 mm
... OTH-150DJ is used to test the performance of materials in various environments and test the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. It is suitable for quality testing ...
Capacity: 60 l - 1,000 l
Temperature: -75 °C - 180 °C
Interior length: 410 mm - 1,000 mm
... b>
Technical data sheet CLIMATIC
CHAMBER KK-CH 2026 — Standard (+5 °C … +180 °C)
Technical data sheet CLIMATIC
CHAMBER KK-CHLT 2026 — Low temperature (−40 °C … +180 °C)
Technical data sheet CLIMATIC
CHAMBER ...
Kambic d.o.o.
Capacity: 830, 1,300 l
Temperature: 25, 30, 40 °C
Length: 1,950, 1,993 mm
... available • Two different volumes available Fully stainless-steel chamber with 3 side double wall for superior air distribution above each shelve even at loaded chamber All exterior in galvanized and powder ...
Kambic d.o.o.
Temperature: -40 °C - 90 °C
... humidity controlled test enivoronment • Material temperature & Rh resistance and product testing • Maintaining superior temperature & Rh stability • Sample conditioning prior to other tests • Accelerated ageing • ...
Kambic d.o.o.
Capacity: 140 l - 2,300 l
Temperature: -25 °C - 70 °C
... Overview
FDM CB-CS Series climate
chamber for regulated stability testing and environmental simulation. Precise, simultaneous control of temperature and humidity with selectable internal volumes (140–2300 L). Operating range: ...
FDM - Environment Makers
Capacity: 25 l - 900 l
Temperature: -40 °C - 180 °C
Interior length: 300 mm
... We can say that the environmental chamber was created to reproduce extreme test conditions. FDM Environmental Simulation Chambers FDM environmental chambers guarantee better parameter ...
FDM - Environment Makers
Capacity: 140 l - 2,300 l
Temperature: -25 °C - 70 °C
Power: 1,400 W - 4,100 W
... according to the type of product under examination. Temperature Stability Chamber For climatic stability tests, we refer instead to a constant temperature chamber. This instrument ...
FDM - Environment Makers
Power: 3,500 W
Interior length: 1,100 mm
Interior height: 450 mm
... Overview
- Model: LY-ZW-UV
- Product: UV climate aging test chamber for accelerated UV exposure, condensation and spray cycles
Key features
- Inner box: SUS304 stainless
Temperature: -70 °C - 150 °C
Interior length: 350 mm - 1,000 mm
Interior height: 400 mm - 1,000 mm
... Product Overview
Programmable temperature and humidity
chamber from the LY-PTH SERIES is designed for environmental testing of electrical and electronic products and materials under high/low temperature and alternating humidity ...
... with personalized passwords. It as two applications: Quick Test: As its name describes, an “on the spot” test where user enters pressure level and time on the screen and starts the test. Programmable ...
... density test: • Specific optical density, Dsmax, Ds10, Ds1.5, Ds4.0. • Clear-beam correction factor Dc. • VOF4. • Results derived from different standards. NBS Smoke Density Chamber consists of • Thick stainless ...
Motis Fire Technology Co., Ltd.
... smoke produced and the smoke-density rating. Exit Sign Test Apparatus consists of • Stainless steel test chamber, the dimension is 300mm by 300mm by 790mm. • The internal wall of the test ...
Motis Fire Technology Co., Ltd.
... Source Test is widely used to assess the flammability performance class of construction or railway material, such as EN 13501-1, EN 45545-2, DIN 4102, DIN 5510-2, etc. Single-Flame Source Test Apparatus consists of • ...
Motis Fire Technology Co., Ltd.
Temperature: -100 °C - 30 °C
Interior length: 120 mm
Interior height: 120 mm
... DWC Series Temperature Chamber is designed according to the standard of 'Charpy Notch Impact Test Method for Metal Materials' and adopts compressor cooling technology, which is made up of two sections (Low temperature ...
Temperature: -196 °C - 30 °C
Interior length: 240 mm
Interior height: 150 mm
... GB/T229-2009 Features： It uses liquid nitrogen cooling technology and high-precision intelligent instrument to control ultra-low temperature test l It can achieve automatic uniform cooling and constant temperature ...
Temperature: 100 °C
External length: 440 mm
External height: 560 mm
... The instrument is designed and made as per national standard of People's Republic of China GB/T 5096 Standard Test Method for Détection ofCopper Corrosion from Petroleum Products bythe Copper Strip Tarnish Test ...
Capacity: 350 l
Temperature: 4 °C - 60 °C
Interior length: 820 mm
... Stability Chambers without humidity control - Horizontal Airflow Stability Chamber FSC 350 is 350 lt instrument for high technology laboratory testing the reaction of samples at several environmental ...
FALC Instruments S.r.l.
Capacity: 500 l
Temperature: 4 °C - 60 °C
Interior length: 640 mm
... Stability Chambers without humidity control - Horizontal Airflow Stability Chamber FSC 500 is 500 lt instrument for high technology laboratory testing the reaction of samples at several environmental ...
FALC Instruments S.r.l.
Capacity: 1,500 l
Temperature: 4 °C - 60 °C
Interior length: 1,500 mm
... Stability Chambers without humidity control - Horizontal Airflow Stability Chamber FSC 150 is 1500 lt instrument for high technology laboratory testing the reaction of samples at several environmental ...
FALC Instruments S.r.l.
Length: 500 mm
Width: 500 mm
Depth: 1,000 mm
... environmental simulation. Our SK dust test chambers provide reproducible and reliable test results. We achieve this through optimally harmonised mechanics, sensors and control technology. The dust ...
iTS GmbH
Length: 1,000 mm
Width: 1,000 mm
Depth: 1,000 mm
... environmental simulation. Our SK dust test chambers provide reproducible and reliable test results. We achieve this through optimally harmonised mechanics, sensors and control technology. The dust ...
iTS GmbH
Length: 2,000 mm
Width: 1,000 mm
Depth: 1,000 mm
... longitudinal chamber design (SK 2000 Q or L) - - SK 2000 D as double chamber: Active test in chamber 1 / Preparation of chamber 2 for the next test ...
iTS GmbH
Temperature: -80 °C - 280 °C
... instances it is temperature influence that counts. Then, it is important to use a thermo chamber in order to emulate real conditions in the test. Temperature chambers open the possibility to investigate ...
Capacity: 64 l
Temperature: -75 °C - 100 °C
Interior length: 400 mm
... ultra-low temperature test chamber: the temperature range is - 85 ° C to+180 ° C and the temperature range is - 75 ° C to+180 ° C. They are widely used, including temperature characteristic test and ...
SONACME Technology
Capacity: 64 l
Temperature: -85 °C - 100 °C
Interior length: 400 mm
... ultra-low temperature test chamber: the temperature range is - 85 ° C to+180 ° C and the temperature range is - 75 ° C to+180 ° C. They are widely used, including temperature characteristic test and ...
SONACME Technology
Capacity: 64 l
Temperature: -70 °C - 180 °C
Interior length: 400 mm
... environmental test chamber of Sonacme Technology will help you to test the effects of temperature and humidity on the characteristics, functions and service life of your products under accelerated conditions. The ...
SONACME Technology
Power: 2.2 W
External length: 638 mm
External height: 970 mm
With a wide temperature range -65°C to +225°C, it provides very advanced temperature conversion testing capabilities. It only takes 13 seconds to convert the temperature from -55°C to +125°C; after long-term multi-working conditions verification, it meets ...
Dongguan Hongjin Test Instrument Co.,Ltd.
Temperature: 80 °C
Interior length: 500 mm
Interior height: 750 mm
... It is suitable for accelerated yellowing aging test of leather, textiles, plastics, rubber and paper materials. It can be used as a reference to determine the yellowing grade of materials, and can also be used to visually measure the ...
Dongguan Hongjin Test Instrument Co.,Ltd.
Temperature: 80 °C
Interior length: 1,000 mm
Interior height: 1,000 mm
... Hong jin laboratory Environmental ipx9 Rain Test Device Chamber/Water Spray Resistance Tester The main function of this device is to test the performance of products stored, transported and used in high ...
Dongguan Hongjin Test Instrument Co.,Ltd.
Capacity: 746 l
Temperature: -20 °C - 80 °C
Interior length: 400, 500, 600, 1,000 mm
... Stability Tests Are An Important Step In The Development Of New Drugs And Pharmaceutical Substances And An Indispensable Element In The Licensing Process Defined By Federal Regulating Authorities. However, These Tests ...
AI SI LI (China) Test Equipment Co., Ltd
Temperature: -70 °C - 200 °C
Power: 746 W
Interior length: 400, 500, 600, 1,000 mm
... Programmable constant climatic Test Cabinet are applicable for testing the performance indexes of aeronautic & astronautic products, ships, weapon, accdemies, motorcycle, information electronics, instruments & meters, ...
AI SI LI (China) Test Equipment Co., Ltd
Temperature: -20 °C - 200 °C
... This design of climatic chamber aplly with super large observe window. ASLI is enviromental equipment chamber factory. Size and Specification can customized accordingly. Temperature range -80degree up to 200degree Humidity ...
AI SI LI (China) Test Equipment Co., Ltd
Capacity: 270, 412, 624, 108 l
Temperature: 35 °C - 55 °C
Interior length: 600, 900, 1,100, 1,300 mm
... series Salt spray tester is one kind of artifical environmental testing equipment, it produces a corroding environment in the chamber and thus, parts in it are attacked under this severe corroding atmosphere. It's an important apparatus ...
Capacity: 34 l
Temperature: 10 °C - 300 °C
Interior length: 250 mm
... The high temperature testing chamber is researched according to the temperature requirement of GB/T4338-2006, GB/T10592, HB 5195-1996 test method. The temperature controller adopts PID control method. The test ...
Jinan Liangong Testing Technology Co., Ltd
Temperature: 10 °C - 300 °C
... temperature Chamber for impact test The high temperature chamber for impact test shall comply with the provisions of GB/T 229 and other relevant national standards regarding the Impact ...
Jinan Liangong Testing Technology Co., Ltd
Temperature: -40, -60, -80 °C
Power: 1,800, 2,500, 2,300 W
Interior length: 275 mm
... CDW-40/60/80 Impact Test Low-temperature Chamber It can fully meet the temperature control indicators stipulated in the national standard GB/T 229-2007, American standard and the European standard of ASTM E23-02a, EN10045, ...
Jinan Liangong Testing Technology Co., Ltd
Capacity: 400 l
Temperature: -2 °C - 70 °C
Power: 1,200 W
... The environmental simulation chambers from tritec are ideal for materials testing under dynamic conditions. These cabinets are equipped with a temperature range of max. -9.9 °C to 70 °C and an active moistening and dehumidification to ...
tritec GmbH
Capacity: 400 l
Temperature: -2 °C - 70 °C
Power: 1,200 W
... The tritec® climatic cabinets with lighting simulate reproducible light and climatic conditions through optimized temperature, humidity and light distribution for the best possible growth of plants or other organisms. The illumination is located outside ...
tritec GmbH
Capacity: 700 l
Temperature: 10 °C - 45 °C
Interior length: 600 mm
... The tritec® climatic cabinets with lighting simulate reproducible light and climatic conditions through optimized temperature, humidity and light distribution for the best possible growth of plants or other organisms. The illumination is located outside ...
tritec GmbH
Temperature: 300 °C
... This instrument is used for high temperature aging test or dimensional change rate test of plastic pipes, pipe fittings, sheets and profiles, and can also be used for baking, drying heat treatment and ...
Temperature: 120 °C
... This instrument is a supporting product for 8760 hours long-term hydrostatic test and thermal stability test of pipes and fittings. Adopt indirect hot air circulation system to avoid direct radiation ...
... This instrument is the corrosion resistance test unit of the comprehensive performance test platform for thin-walled stainless steel pipe fittings. It is mainly used to test the salt ...
Capacity: 109 l - 1,485 l
Temperature: 0 °C - 60 °C
Length: 1,340 mm - 2,010 mm
... CLIMATIC CHAMBERS WITH AN ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable equipment to guarantee stable and precise conditions. The max temperature of 60?C allows to use ...
POL-EKO sp.k.
Temperature: -100 °C - 250 °C
... MATERIAL | STANDARD | DESCRIPTION
Static
tests | Metal | ASTM E21 | High-temperature tensile testing of metallic materials
Static
tests | Metal | ASTM E290 | Material bending
test for ductility
Static ...
MonTech’s Online Rubber Testing Cell is the most advanced and only true automated testing solution for high-capacity mixing operations. With Online Testing Cells installed on over 90+ mixing lines globally, MonTech is the world’s expert and leader in ...
Temperature: -75 °C - 180 °C
... ESPEC's Environmental Stress Chambers can withstand heat loads generated by the specimen, improve temperature change rates, and provide expanded ranges for temperature and humidity. Each chamber is also equipped with ...
ESPEC
Capacity: 600, 1,000, 1,500 l
Temperature: -50 °C - 180 °C
... Temperature and Climate Test Chambers are used to create specific and highly controlled temperature and humidity conditions to simulate real environmental conditions. Chamber Variants: Type Series ...
RS-Simulatoren Prüf- und Meßtechnik GmbH
Temperature: -20 °C - 150 °C
... Full-size chambers performances From -20 / -40 or -60 to +150C, (humidity type: 30 to 95% rh) our Bench-Top model combines a wide operation range in a compact design. Available in 2 volumes of 22,5L and 64L, the lineup includes a variation ...
ESPEC
Length: 308 cm
Width: 195 cm
Depth: 222 cm
... users to program test procedures, monitor testing processes, and retrieve test data • Main enclosure provides environmental control and operational safety • HMI (human-machine interface) allows direct user interaction ...
the best suppliers