DN: 0.5 mm - 4 mm
Pressure: 16 bar
Temperature: -20 °C - 120 °C
... 1. Adopting fluorine rubber balls, reliable sealing; 2. Equipped with a check spring, there is no requirement for installation direction (except for HY-1ZG); 3. Rich diameter specifications can meet various diameter requirements; 4. ...
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
... valve is a PVC-u ball check valve ideal for use in applications that require precise closure and for conveying dirty fluids, even with suspended solids and filaments. CB check valve ...
Effast
DN: 0.125 in - 1 in
Pressure: 400, 320 bar
Temperature: -20 °C - 100 °C
... In line check valves available from 1/8" to 1" bsp, Max.working pressure 400/320 Bar, oil flow rate up to 160 Lt./min. (depending on the size) ...
F.lli TOGNELLA
Pressure: 50 bar
... Xl-3 single line oil filling valve provides accurate and fail safe oil dosage, which is not affected by viscosity, temperature or pressure. The new valve body allows a large number of new application possibilities. ...
DN: 10 mm - 100 mm
Pressure: 0 MPa - 1 MPa
Temperature: -10 °C - 150 °C
... quick check valves Standard: DIN, SMS, ISO, 3A Sanitary quick check valve material: the material contacting member and AISI304 or AISI316L using Industrial dairy products, beer, food, ...
DN: 0.25 in - 3 in
Pressure: 200 psi
... ASTM-A351-CF8M Full port, Rating 200psi, Threaded end, Screwed cap, Swing type disc, integral seat ...
BOLA-TEK Mfg.Co
DN: 25 mm - 80 mm
Pressure: 16 bar
Temperature: -10 °C - 70 °C
... Working position: Vertical, horizontal Features •very slight pressure drop •full bore •self cleaning •silent •horizontal and vertical instalation ...
DN: 0.125, 0.25, 0.375, 0.5 in
Pressure: 0 bar - 0.3 bar
Temperature: -10 °C - 150 °C
... DESCRIPTION Uni-directional valve with exclusive double sealing system: a metal ball against the O-Ring ensures sealing at low pressure; at high pressure, the OR warps, stretches out, and the metal ball ensures sealing directly on the ...
Pressure: 0 Pa - 3,200,000 Pa
... The UZZD10 is a check valve designed for applications in hydraulic systems. It can serve as a low-pressure overflow valve to maintain pressure drop at a consistent degree. This is equipped with a sealing ...
PONAR S.A.
DN: 0.375 in - 1 in
... Throttle And Check Valves 10 : Non-ISO Mounting 20 : ISO Mounting Valve Size 03 : 3/8" 06 : 3/4" 10 : 1-1/4" G : Sub-plate Mounting T : Threaded Connections Sériés Number ...
Dynatec International Co., Ltd.
DN: 800 mm - 4,500 mm
Pressure: 140 bar
Temperature: 425 °C
... NPT THREAD CHECK VALVE 800 TRIM5 Description •Forged steel A105 •NPT Thread •Class 800 •Standard: API 602 • Threaded ends: ANSI B1.20.1 •Test: API 598 •Max. ...
KTN
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C
... Design Check Valve with threaded connection and with a EPDM coated ball. Connection Thread ¼” … 3″, acc.to ISO 228-1 Mounting position Horizontal, cap above and vertical ...
DN: 0.25 in - 2 in
... Valves by Velo Acciai include ball valves, butterfly valves, two-way valves for nitrogen and non-return valves. Technical features Sizes of ball valves ...
DN: 6 mm - 40 mm
Pressure: 350 bar
Temperature: -20 °C - 100 °C
... SAE J 514 / ISO / DIS11926-1 Female thread Panel mounting kit ...
DN: 8 mm - 150 mm
Pressure: 150 psi - 235 psi
Temperature: 70 °F
... Hayward's TC True Union Check Valves are available in PVC, CPVC, and PP and seats are FPM or EPDM. They are all put together with lubricant that has no silicone. They feature 1/2 in. to 6 in. are Sure Block layout, seats ...
Hayward Industries, Inc.
Pressure: 3 psi - 16 psi
... In-line Check Valves - General Information MICO® Residual Check Valves allow free flow of hydraulic system fluid in one direction while maintaining residual fluid pressure from the ...
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 90 °C
... and corrosion-resistant gunmetal, resistant against aggressive water male union thread with plugged drain port with test port controllable check cartridge free from dead spots for any installation ...
DN: 0.25, 0.375, 0.5, 0.75, 1 mm
Pressure: 2,500 psi
Temperature: -15 °C - 400 °C
... Spring-loaded, compact, stainless steel check valve. 316 stainless steel Spring-loaded 2 lb. or 10 lb. cracking pressures MNPT x MNPT Usable on metering pumps and injection line applications Suitable for pressures ...
JAECO Fluid Systems
DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min
The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.
DN: 10 mm - 100 mm
Pressure: 10, 12, 16, 25, 40 bar
Temperature: -20 °C - 100 °C
... Full bore check valve, F/F threaded. Temperature range: -20°C +100°C ...
DN: 0.5 in - 12 in
Pressure: 150 psi
... SIZE: 1/2＂～2＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) CHECK VALVE TYPE: BALL/HALF BALL WORKING PRESSURE: 150PSI ...
Xiamen Keheng Plastic Co., Ltd.
DN: 0.5 in - 4 in
Temperature: 0 °C - 100 °C
... Brass swing check valve Diameters from DN015 - ½" to DN100 - 4" Threaded F/F (ISO 228/1) NBR seal Minimum opening pressure 0,03 bar TR CU 010 compliant PN10 (PN6 for DN≥65) Free of CE marking (cat. according ...
DN: 0.5 in - 12 in
... API 6D Lift Check Valve Manufacturer: Lift Type Check Valves, BS 1868, API 6D, BS 5352, ISO 15761, 1/2-12 Inch, Class 150-2500 LB, BW, SW, Threaded End. Lift check ...
DN: 0.5 in
Pressure: 16 bar
Temperature: 4 °C - 100 °C
... Brass ball valves with incorporated stainless steel filter, check valves, a blend of manometer and darin. Ball valves are multipurpose for the hydraulic system. Valve ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 200 °C
... closing thightness acc. EN -12334 compact settlement environment-friendly no maintenance Aplications hot cold and cooling water plants neutral fluids ...
VARIMEX-VALVES Poland Sp.z.o.o.
DN: 0.5 in - 12 in
Pressure: 400,000 Pa - 600,000 Pa
... wholesale FOOT VALVES, the raw materials like CPVC and PVDF are wholly imported from Noveon (USA) and Atofina (France). Plastic CPVC Flange Foot Valve FRPP Plastic Flanged Foot Valve. PVDF Plastic ...
DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 220 °C
... The innovative springless check valve for clean applications. Maximum hygiene with no maintenance required. Tightness guaranteed in all installation positions, even vertical with downward flow. The patented YGROS ...
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C
... A check valve, or non return valve, is a valve that prevents the fluid from flowing backwards and ensures that it flows in only one direction. It can be used to prevent the loss of prime ...
DN: 0.375 in
Pressure: 0 bar - 16 bar
Temperature: -25 °C - 180 °C
... swing check valve 3/8" inch female thread, body made of stainless steel 1.4408, disc made of stainless steel 1.4408 seal metall installation position: - horizontal or vertical with ascendant fluid product feature: ...
DN: 10 mm - 100 mm
Pressure: 12, 16, 25, 40, 10 bar
Temperature: -10 °C - 150 °C
... Full bore check valve, F/F threaded, Viton® seat suitable for application with not halogenated hydrocarbons and fuels (gasolines, kerosene...). ...
Rubinetterie Bresciane
DN: 3 mm - 8 mm
Pressure: 0.1 bar - 6 bar
Temperature: -40 °C - 180 °C
... Check valves are used to prevent media from flowing back in systems or to protect equipment against media blow-back. The three types (with spring, without spring and COMPACT) allow for use in many different applications. ...
DN: 0.25 in - 2 in
Pressure: 16, 40 bar
Temperature: -20 °C - 180 °C
... Description Check Valve Body Brass, Stainless Steel ...
DN: 40 mm - 400 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 80 °C
... Ideally suited to be used particularly on the suction and discharge sides of pumps installed in lines containing high viscosity media,slurries. • Designed according to EN 1074-3 and pressure tested to EN 12266-1 • A minimum back pressure of 0,3 bar ...
DN: 0.25 in - 2.5 in
Pressure: 0 psi - 6,000 psi
... Basic- Check® Valve is a versatile all-purpose, non-slam valve that provides reliable, low-maintenance service for a wide range of liquids, steam and gases at various pressure/temperature combinations. ...
DFT Inc.
DN: 0.375 in - 1.25 in
Pressure: 210 bar
... The CNT and DT Series, manufactured by HOF hydraulic, are check valves that feature an optional cracking pressure. These valves allocate a liquid or gas to run through it in only one path. Furthermore, ...
DN: 0.375 in - 2 in
... Spring Check Valve for USA Market 200 WOG spring Type Threaded Ends Comply with ANSI B2.1 3/8" - 2" Solder Ends Comply with ANSI B16.18 1/2" - 2" Valves are Tested in Accordance ...
Ningbo Yinzhou Plumbing Hardware Co., Ltd.
Temperature: -320 °F - 165 °F
... Application Inline check valves with metal seat option for cryogenic service or with soft seat option for leak free operation in gas service. Features • One directional flow indicated by arrow on body. • Large Cv for ...
Rego Europe
the best suppliers