DN: 0.375 in - 4 in
Pressure: 25, 16, 10 bar
Temperature: -10 °C - 90 °C
... Stainless Steel spring NBR seal Female/Female : ISO 228-1 ...
Codital
DN: 0.5 mm - 4 mm
Pressure: 16 bar
Temperature: -20 °C - 120 °C
... 1. Adopting fluorine rubber balls, reliable sealing; 2. Equipped with a check spring, there is no requirement for installation direction (except for HY-1ZG); 3. Rich diameter specifications can meet various diameter requirements; 4. ...
DN: 0.125 in - 2 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 60 °C
... Series of uni-directional valves from brass hexagonal bar, female threaded. In line mounting they allow the compressed air to flow in one direction only; therefore, they are useful in those applications where no return ...
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C
... valve is a PVC-u ball check valve ideal for use in applications that require precise closure and for conveying dirty fluids, even with suspended solids and filaments. CB check valve ...
Effast
DN: 0.125 in - 1 in
Pressure: 400, 320 bar
Temperature: -20 °C - 100 °C
... In line check valves available from 1/8" to 1" bsp, Max.working pressure 400/320 Bar, oil flow rate up to 160 Lt./min. (depending on the size) ...
F.lli TOGNELLA
Pressure: 50 bar
... Xl-3 single line oil filling valve provides accurate and fail safe oil dosage, which is not affected by viscosity, temperature or pressure. The new valve body allows a large number of new application possibilities. ...
DN: 10 mm - 100 mm
Pressure: 0 MPa - 1 MPa
Temperature: -10 °C - 150 °C
... quick check valves Standard: DIN, SMS, ISO, 3A Sanitary quick check valve material: the material contacting member and AISI304 or AISI316L using Industrial dairy products, beer, food, ...
DN: 0.25 in - 3 in
Pressure: 200 psi
... ASTM-A351-CF8M Full port, Rating 200psi, Threaded end, Screwed cap, Swing type disc, integral seat ...
BOLA-TEK Mfg.Co
DN: 25 mm - 80 mm
Pressure: 16 bar
Temperature: -10 °C - 70 °C
... Working position: Vertical, horizontal Features •very slight pressure drop •full bore •self cleaning •silent •horizontal and vertical instalation ...
DN: 0.125, 0.25, 0.375, 0.5 in
Pressure: 0 bar - 0.3 bar
Temperature: -10 °C - 150 °C
... DESCRIPTION Uni-directional valve with exclusive double sealing system: a metal ball against the O-Ring ensures sealing at low pressure; at high pressure, the OR warps, stretches out, and the metal ball ensures sealing directly on the ...
Pressure: 0 Pa - 3,200,000 Pa
... The UZZD10 is a check valve designed for applications in hydraulic systems. It can serve as a low-pressure overflow valve to maintain pressure drop at a consistent degree. This is equipped with a sealing ...
PONAR S.A.
DN: 0.375 in - 1 in
... Throttle And Check Valves 10 : Non-ISO Mounting 20 : ISO Mounting Valve Size 03 : 3/8" 06 : 3/4" 10 : 1-1/4" G : Sub-plate Mounting T : Threaded Connections Sériés Number ...
Dynatec International Co., Ltd.
DN: 800 mm - 4,500 mm
Pressure: 140 bar
Temperature: 425 °C
... NPT THREAD CHECK VALVE 800 TRIM5 Description •Forged steel A105 •NPT Thread •Class 800 •Standard: API 602 • Threaded ends: ANSI B1.20.1 •Test: API 598 •Max. ...
KTN
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C
... Design Check Valve with threaded connection and with a EPDM coated ball. Connection Thread ¼” … 3″, acc.to ISO 228-1 Mounting position Horizontal, cap above and vertical ...
DN: 0.25 in - 2 in
... Valves by Velo Acciai include ball valves, butterfly valves, two-way valves for nitrogen and non-return valves. Technical features Sizes of ball valves ...
DN: 6 mm - 40 mm
Pressure: 350 bar
Temperature: -20 °C - 100 °C
... SAE J 514 / ISO / DIS11926-1 Female thread Panel mounting kit ...
DN: 8 mm - 150 mm
Pressure: 150 psi - 235 psi
Temperature: 70 °F
... Hayward's TC True Union Check Valves are available in PVC, CPVC, and PP and seats are FPM or EPDM. They are all put together with lubricant that has no silicone. They feature 1/2 in. to 6 in. are Sure Block layout, seats ...
Hayward Industries, Inc.
Pressure: 3 psi - 16 psi
... In-line Check Valves - General Information MICO® Residual Check Valves allow free flow of hydraulic system fluid in one direction while maintaining residual fluid pressure from the ...
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 0 °C - 90 °C
... and corrosion-resistant gunmetal, resistant against aggressive water male union thread with plugged drain port with test port controllable check cartridge free from dead spots for any installation ...
DN: 0.25, 0.375, 0.5, 0.75, 1 mm
Pressure: 2,500 psi
Temperature: -15 °C - 400 °C
... Spring-loaded, compact, stainless steel check valve. 316 stainless steel Spring-loaded 2 lb. or 10 lb. cracking pressures MNPT x MNPT Usable on metering pumps and injection line applications Suitable for pressures ...
JAECO Fluid Systems
DN: 0.25 in - 1.5 in
Pressure: 0 bar - 350 bar
Flow rate: 12 l/min - 310 l/min
The FPR series, manufactured by Dicsa, has a body that has been constructed out of steel. It also has a cracking pressure of 0.5 bar.
DN: 10 mm - 100 mm
Pressure: 10, 12, 16, 25, 40 bar
Temperature: -20 °C - 100 °C
... Full bore check valve, F/F threaded. Temperature range: -20°C +100°C ...
DN: 0.5 in - 12 in
Pressure: 150 psi
... SIZE: 1/2＂～2＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) CHECK VALVE TYPE: BALL/HALF BALL WORKING PRESSURE: 150PSI ...
Xiamen Keheng Plastic Co., Ltd.
DN: 0.5 in - 4 in
Temperature: 0 °C - 100 °C
... Brass swing check valve Diameters from DN015 - ½" to DN100 - 4" Threaded F/F (ISO 228/1) NBR seal Minimum opening pressure 0,03 bar TR CU 010 compliant PN10 (PN6 for DN≥65) Free of CE marking (cat. according ...
DN: 0.5 in - 12 in
... API 6D Lift Check Valve Manufacturer: Lift Type Check Valves, BS 1868, API 6D, BS 5352, ISO 15761, 1/2-12 Inch, Class 150-2500 LB, BW, SW, Threaded End. Lift check ...
the best suppliers