- Environment - Health - Safety >
- Air Treatment and Noise Management >
- Wall-mounted fan
Wall-mounted fans
Air flow: 0.72 m³/s - 3.19 m³/s
Axial wall fans are available in 3 phase solutions to provide cooling.
Air flow: 300 ft³/min - 500 ft³/min
The CBF is a direct-drive transfer fan designed for small size, high volume applications. Units feature an efficient propeller and are mountable in any wall construction. 300 to 500 cfm Up to 0.4 ...
Greenheck
Air flow: 0 m³/h - 30,000 m³/h
WALL AXIAL FAN HIMALIA type HM Explosive atmospheres - Industrial ventilation - Tertiary ventilation Wall axial fans type Himalia out of galvanized steel with fixation ...
Air flow: 650 m³/h - 24,700 m³/h
Vostermans Ventilation Mulitpanel Fan Multifan provides a broad array of panel fans which can be installed in the sidewalls of a building. Panel fans are utilized for many agricultural ...
Vostermans Ventilation
Air flow: 400, 100, 150, 280 m³/h
Styl - Domestic fan Available versions Sstandard WCtimer WCHtimer, humidistat standard versions 007-0001STYL 100 Sstandard 007-0002STYL 100 WPpull cord switch 007-0009STYL 100 WCHtimer, humidistat 007-0003STYL ...
Dospel
Air flow: 5,080 ft³/min - 9,540 ft³/min
... velocity 220VAC wall mount mist Fans are compatible with variety of mid pressure and high pressure misting pumps. Our Hydro Breeze series fan combines high output performance, low cost ...
Mistcooling Inc
Air flow: 450 m³/h - 29,000 m³/h
APPLICATIONS: The fans of these series are suitable for sucking clean air and they are mainly used in ventilation and drying plants, both civil and industrial, for materials cooling, in the smoke extraction systems, ...
Air flow: 4,500 m³/h
THE EP AXIAL VENTILATOR IS SUITABLE FOR THE TRANSPORT OF DUSTY AIR. Axial fan with stamped resin square frame and blades with wing profile in PPG or PAG. The EP axial ventilator is suitable for the transport of dusty ...
Wall-mounted helical extractors. With ATEX certificate and Ex d motor. Cast aluminum propeller. • Engine-propeller air direction. • Explosion-proof cable gland included. • Sheet steel support ...
A2S Advanced Safety Solutions
• Cast aluminum propeller. • Engine-propeller air direction. • Explosion-proof cable gland included. • Sheet steel suction ring with aluminum strip on the propeller area according to standard EN-1486 • Operating temperature: -20 ...
A2S Advanced Safety Solutions
Wall-mounted helicoidal extractors. With ATEX certificate and Ex e, Ex d, Ex tc or Ex tb motors. Designed to work in explosive atmospheres with risk of gas or dust. • Cast aluminum propeller. • ...
A2S Advanced Safety Solutions
Air flow: 0 m³/h - 0.7 m³/h
Noise level: 50 dB
Effective Improvement for Air Environment Simply installing it at the edge of the display case to efficiently improve air quality. It is unnecessary to move exhibits when installing it and to open the display case for ventilation after ...
... power 19W • Amperage 0,08A • Frequency 50/60Hz • Dimensions (LxWxH) 12 x 12 x 3,9 cm • Standards CE certified • with fan grille and 4x screws
Diameter: 711 mm - 813 mm
Visctronic Fan Drives utilize BorgWarner’s proven viscous technology with precise electronic control. The fan drive is controlled by the engine’s control module for precise fan speed ...
Air flow: 900, 4,500, 2,250, 2,900, 1,500 m³/h
Noise level: 55 dB - 72 dB
Helicoidal aspirators suitable for explosive atmospheres. They are ideal for wall or panel mounting and they are used for air or fumes aspiration directly to the outside or through a short pipe. Furthermore, ...
Air flow: 750 m³/h - 150,000 m³/h
Diameter: 165 mm - 1,700 mm
Rotational speed: 3,000, 1,500, 1,000 rpm
... range of ENAG fans has been designed especially for the marine environment. With more than 30 years’ experience in fan design and manufacture, efficiency and reliability are assured. Advantages Designed ...
Air flow: 900 m³/h - 4,500 m³/h
Rotational speed: 1,200 rpm - 1,460 rpm
Noise level: 55 dB - 72 dB
Explosion Proof Certified Axial fans to extract air and fumes directly outside through short ducting, wall or panel mounting.
Single-piece, glass-reinforced polyamide fan with blade geometry derived from our long experience as a market leader in radiator and engine cooling for off-road applications. Ranges from 12 inches (305 mm) to 39 inches (1000 mm).
Air flow: 17.9, 22.6, 27, 31.6, 13.3 m³/h
Rotational speed: 6,000, 8,000, 10,000, 12,000, 14,000 rpm
Noise level: 48, 29, 36, 40 dB
Material : Impeller& Frame Plastic(UL94V-0) Lead Wires :UL 1007 AWG#26 or Equivalent Impeller : 7 Blades Rotational direction CCW view from impeller side Mass:24g
NINGBO SHENGJIU CABINETS LOCK
Air flow: 18,689 m³/h - 28,713 m³/h
Diameter: 508, 610 mm
... coatings Rugged aluminum housing and fan blade meet demanding ventilation requirements. RF design using action-reaction principles; compressed air is discharged through nozzles located at the tip of the fan ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining