Analog converter CAN MK-4I4O

digitalpowerRS232

The MasterCan hot-plug module CAN MK-4I4O is wirelessly connected to the CAN bus with 4 additional inputs/outputs, in order to link with weighing indicators. One analog board (0/10 V or 4/20 mA) can be added to this module. The CAN MK-4I4O hot-plug module is powered by 12 V (or 24 V). Consumption : 1.5 W / 3 W (max under 12 V) The MasterCan Hot-plug module CAN MK-4I4O is configured by RS232 serial link. A set of LEDs on the front panel allows to know the operating status of this CAN BUS module without any additional equipment. Charcateristics of opto-coupled digital inputs: The 4 outputs “In1”, “In2”, “In3”, “In4” are available on pluggable terminals. They are connected to each other by a common terminal. Input voltage : 12 Volts to 24 Volts. Maximum power consumed per input : 10mA max. Characteristics of relay outputs: The four outputs “Out 1”, “Out 2”, “Out 3”, “Out 4” are available on pluggable terminals. Max Voltage: 48V DC or AC. Maximum voltage : 1 Ampere DC or AC. The input/output assignment depends on the indicator software (see the user manual and the software configuration). Analog output option 0-10V / 4-20mA: The 0-10V or 4-20 mA option allows transmitting the indication of Gross or Net weight: As a voltage evolving from 0 VDC for 0 kg to 10 VDC for the maximum weight of the scale Or as evolving power supply from 4 mA for 0 kg to 20mA for the maximum weight of the scale For this option, it is necessary to add an analog option board in the hot-plug module CanMK-4I4O : Analog option board 0-10V – order code is : 101 095 110 (green LED on the analog option board)