RS-232 converters

BoX2 pro SC High-performance protocol converter/IIoT gateway/edge controller Protocol conversion Cloud connectivity HMI and web server Integrated CODESYS control Local data base storage, alarm servers, data exchange, ...

BoX2 extreme SC Rugged protocol converter/IIoT gateway/edge controller Protocol conversion Cloud connectivity HMI and web server Integrated CODESYS control Local data base storage, alarm servers, data exchange, ...

JetCon 2411 RS232/422/485 to fiber serial converter Full duplex peer-to-peer or half duplex ring connection Data rate up to 921.6 kbps 100 ST fiber * Auto baud rate and direction 15 kV ...

Converter for serial port connection up to 1.2 km over a twisted pair cable. Operates in auto-powered or powered mode (supplied with USB power supply cable). Can be configured in DCE mode or DTE mode. Used to create ...

The plug-in type, RS232C/RS485 dual directional converter is what we called the ML2 RS232C/RS485 Converter. ...

The ZU252 signal converter is suitable for analog or serial output of incrementally detected positions. • Inputs for HTL and RS422 signals up to 1 MHz [RS422] or 200 kHz [HTL] • 14-bit ...

... input, the ZU210 signal converter can convert frequencies into analog or serial RS232 / RS485 signals. • 1 incremental input • 1 SSI input up to 32 bits • Clock ...

... input, the ZU210 signal converter can convert HTL and TTL signals into analog or serial RS232 / RS485 signals. • 1 incremental input • 1 SSI input up to 32 bits • ...

... 1102B Ethernet to RS-232/ 422/ 485 Serial Device Dynamic IP Configuration Server / Client Dual Modes Built-in Security Control Remote Reprogramming Lantech LSC-1102B is a full set serial device within ...

The MultiCOM 302 protocol converter may be used to monitor the UPS using the MODBUS/JBUS protocol on RS485 or RS232 serial line. It will also manage a second, independent ...

... serial converter. The converter comes with a maximum speed of 1 Mbps and a self powered or external power supply. Its automatic lines has a RS485 drive standard as well as their connecting ...

... speed. 115,2 Kbps (self RS485 line turn around up to 56 kbps) 2 screw-in connectors (8 points on RS232 side, 6 points on RS422/RS485 side) 24V power ...

The RD300-OF is specifically made to allow the use of a greater communication bandwidth while providing at full immunity from the EMI/RFI interferences to ensure an increased security protection. It also provides a wide range of benefits ...

... measurement and outputs simulation Options: » Hart signal transparency with the barrier » Screw terminals » RS232 programming cable and USB / RS232 converter » ...

... transparency with the barrier » RS232 programming cable and USB / RS232 converter EC Type examination certificate number : LCIE03 ATEX 6469X ATEX ...

... barrier » Screw terminals » RS232 programming cable and USB / RS232 converter » ACCDIVBX power supply cables Function Programmable converter ...

．Automatic RS-232 to RS-422/485 converter ．Auto baud rate and direction control ．High speed up to 921.6 Kbps ．RS-422/485 3000VDC isolation protection ...

．USB / RS-232 DTE and DCE Connection ．Fully RS-232C Signals, Flow Control ．USB 1.1/1.2/2.0 compatible ．921.6 Kbps High Speed Serial ．480Mbps USB Data Throughput ．15KV ...

．USB / RS-232 DTE and DCE Connection ．Fully RS-232C Signals, Hand-Shaking ．USB 1.1/1.2/2.0 compatible ．2 x 921.6 Kbps High Speed RS-232 ...

Bidirectional interface converter ● Transfer rate: 4800 baud ● RS232 to EASYBus or USB to EASYBus Characteristics The interface converters are used for decentralized ...

Z107 allows a transparent conversion and isolation of RS485/RS422 serial line into RS232 and viceversa.The RS232 connection is available ...

The K107B is designed to accept a single half duplex RS-485 input and give a single, isolated, half duplex RS-232 output, the K107B is ideal for most serial conversions and isolated transmissions ...

TLC485 series are pocket RS-232 to RS-485 interface converters with high cost-effectiveness, which can implement bidirectional data conversion between serial port RS-232 ...

TLC422 series are pocket RS-232 to RS-422 interface converters with high cost-effectiveness, which can implement bidirectional data conversion between serial port RS-232 ...

... pocket RS-232 to RS-485 interface converter, which can implement bidirectional data conversion between serial port RS-232 and RS-485, ...

Antaira Technologies BTS-1000A-2 pre-configured Bluetooth to RS-232 Serial Converters allow any device with an RS-232 port to communicate wirelessly ...

Antaira Technologies BTS-1000A Bluetooth to RS-232 Serial Converter allows any device with an RS-232 port to communicate wirelessly with ease. No software ...

The UTS-1110A USB to serial conversion cable is designed for PC, thin clent, or server to provide an instant COM port expansion via the Universal Serial Bus (USB). The UTS-1110A provides the scalability to quickly adapt to new USB technologies. With ...

The DAT3580 isolated interface converter between asynchronous serial lines features complete isolation between power supply and asynchronous serial line RS-232 and serial line RS-485 ...

... products cover GSM controller, wireless Ethernet converter (also called wireless Ethernet adapter, wireless Ethernet bridge, wireless Ethernet), Ethernet converter, RS-485 to RS-232 ...

RS-485 TO RS-232 CONVERTER DESCRIPTION : The communication converter between RS-485 with RS-232. The ...

... and a transformer isolated DC-to-DC converter. The RS-232 connection is through male or female EIA 9-pin D-sub connectors, or a 3-wire RS-232 connection ...

The LDM422 is a compact RS-232 to RS-422 converter which features a complete electrical isolation barrier and heavy duty electrical surge protectors. These devices feature ...

The LDM485 is a compact RS-232 to RS-485 converter which features a complete electrical isolation barrier and heavy duty electrical surge protectors. These devices feature ...

... breakage and of measurement threshold -20 to 265 Vac-dc, or 9 to 30 Vdc on request -input/output 1500 Vac power supply -RS232 link or front panel

USB-CON converter is used to convert the data in the devices (meter, energy analyzer, reactive power control relays etc.) with communication characteristics such as RS485, RS232 ...

It is designed for providing information exchange through electronic devices providing communication by using IEC1107 ( IEC62056-21) protocol on optical port. Descriptions: GSM/Ethernet or PSTN-based modems providing communication ...

SINGLE CHANNEL RS 422 / RS 485 ISOLATING REPEATER DESCRIPTION The D1061S is used to separate Intrinsically Safe RS 422 / RS 485 equipment located in Hazardous Location ...

... CHANNEL RS 422 / RS 485 FIELD BUS ISOLATING REPEATER DESCRIPTION The DIN-Rail RS422 / RS485 Fieldbus Isolating Repeater type D1061S-077 is used to separate Intrinsically ...

... remote reading applications. Our M-Bus Master (M-Bus converter) is universal and simple M-Bus Master that can be connected up to 250 M-Bus devices. This device also convert M-Bus signal to RS232 ...

Application Most industrial computer systems come with standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking ...

Westermo MDW-45 serial converter allows the connection of RS-232 and RS-422/RS-485 systems. The unit is very easy to install thanks to the use of ...

The RS232/485 is a self-contained device for converting RS232 signals into RS485 signals. Its simple design makes it ideal for use with all Power Management ...

... products available in this conversion Choose between converters: RS232 to RS422/RS485 RS232 to Current ...

... serial converters and serial to fiber converters. USB to Serial Converter can be connected to USB port & provides high speed RS-232/RS-422 ...