Electro-permanent lifting beam TBK series

for flat partsfor sheet metalfor flat loads

The electropermanent load lifting magnet traverses TBK4 and TBK6 with automatic telescopic arm allow the lifting and transportation of sheets in different sizes from 3m to 16m. The patented solid steel modules are more heat-resistant than comparable modules made with a plastic casting mass. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the magnet traverses from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 5 mm. Professional advantages: - Optimal holding force for different sheet thicknesses, can be pre-selected through the power level regulation. - INCHING separation of stacked thin sheets - Magnet zone selection for different sheet sizes - Spring package from magnet modules to compensate for unevenness in sheets and even lifting - ADPREM function prevents random switching in the air - No electricity flows during lifting (only a electrical impulse for a few seconds is required for magnetizing or demagnetizing) - The magnets can be switched manually through a push button or automatically through a pick-up mechanism. - Optional: Magnet modules horizontally rotatable by 90° for skinny sheet strips