Pneumatic grippers

Vacuum gripping systems with foam, 120x200 mm, fine pitch, with integrated self-closing valves

Grip strength: 78 N - 7,286 N
Stroke : 2 mm - 25 mm

• Double acting with optional springs (on closing or on opening). • Long stroke or short stroke. • Possibility of front fastening with through screws. • High efficiency transmission system. • Magnetic sensors or optional inductive ...

Grip strength: 36 N - 2,400 N
Stroke : 1.2 mm - 20.5 mm

• Double-acting drive. • The rugged construction lends itself to heavy duty applications for a trouble free long life without maintenance. • Wide choice of stroke length and gripping force options. • The gripping force is constant ...

Grip strength: 36, 60, 84, 144 N

... control. The Series CGSP grippers, available in 4 sizes (20, 25, 32 and 40) are parallel and double-acting, self-centering and guided by means of a T-shaped sliding guide. Thanks to the materials and surface coating ...

Grip strength: 28 N - 1,082 N
Stroke : 41 mm

... light and resilient Our self-centering, parallel grippers with an H-shaped guide are available in 5 sizes with standard or long stroke. Because of the materials and surface coating used, the gripper ...

The CGSN Series offers angular grippers that are designed to operate at 1 bar/7 bar pressure, 100 cycles/min. maximum frequency and -10°C/60°C temperature in dual effect. These grippers can work continuously ...

... depending on their size - A connection equipped with quick coupling for feeding compressed air to the generators - An anodised aluminium box, open on one side, with two air inlet connections inside ...

Pneumatic grippers from the 6300 series are typically used in complex systems such as assembly machines, robots, manipulators etc. This series covers the wide range requirements of this sector, allowing ...

Pneumatic grippers from the 6300 series are typically used in complex systems such as assembly machines, robots, manipulators etc. This series covers the wide range requirements of this sector, allowing ...

Pneumatic grippers from the 6300 series are typically used in complex systems such as assembly machines, robots, manipulators etc. This series covers the wide range requirements of this sector, allowing ...

Grip strength: 70, 170 N
Stroke : 5 mm

• Dual-acting parallel gripper for internal and external clamping. • Anodized aluminium alloy body and tempered steel jaws. • Bottom or side fixing. • All sizes come with magnets and sensor slots Quantity per ...

Grip strength: 170, 70 N
Stroke : 5 mm

Dual-acting grippers with parallel jaws and internal and external clamping. The body is made of anodized aluminium alloy and the jaws are made of hardened steel. All sizes are equipped with a magnet and sensor grooves. ...

Grip strength: 135, 100, 45 N
Stroke : 5, 4, 7 mm

... Min temperature (°C): -10 Serie di prodotto: Pneumatic grippers Size: 16

... suitable for using long gripper fingers - Monitoring with electronic magnetic switches for a maximized process reliability - Mounting from two sides in four screw directions for universal and flexible gripper ...

Grip strength: 123 N - 21,150 N
Stroke : 2 mm - 45 mm

... moments possible suitable for using long gripper fingers Drive concept oval piston for maximum gripping forces Mounting from two sides in three screw directions for universal and flexible gripper ...

Grip strength: 180 N - 8,750 N
Stroke : 2 µm - 25 µm

Description Universal 2-finger parallel gripper with permanent lubrication, high gripping force, and high maximum moments due to the use of a multi-tooth guidance. Field of application Pneumatic ...

... the RobotStudio Palletizing PowerPac. This user-friendly, PC based software, comes pre-configured with all ABB robots and gripper models. It allows users who have little or no robot programming experience to create programs ...

... programmable zones. The vacuum rails are adjustable for different case sizes, and the gripper includes a built-in pallet gripper as an option. The gripper comes complete with all air ...

Grip strength: 60, 115, 200, 340 N
Stroke : 4.5, 6, 8, 10 mm

... Type 25 parallel long stroke grippers. Reliability and robustness of Type 24 parallel grippers With a hard anodized body and cylinder, prismatic steel guide, fully protected mechanism, these pneumatic ...

Grip strength: 60 N - 200 N
Stroke : 4.5 mm - 8 mm

... range of 3-jaw grippers specifically dedicated to screwing: Type 2913 grippers. Reliability and robustness of Type 24 parallel grippers With a hard anodized body and cylinder, prismatic ...

Grip strength: 60, 170, 435, 990 N
Stroke : 12 mm - 120 mm

... parallel, these grippers have a very good stroke/length ratio. With a hard anodized body, a long prismatic steel guide, these parallel pneumatic grippers are reliable and robust. Mounting ...

Grip strength: 50, 1, 2 N

Pneumatic cord and yarn grips provide a convenient method for clamping fiber, cord, yarns and fine braided wires to reduce the problem of jaw breaks associated with testing these materials. A specially designed horn with ...

Grip strength: 1, 3, 10 kN

Pneumatic Wedge Grips Instron pneumatic wedge action grips may be used in static or dynamic materials testing applications, interchangeable wedge-shape grip faces accommodating either flat or round ...

Pneumatic wedge action grips feature an open front design, which facilitates easy loading of large specimens. This series can accommodate round specimens up to 60 mm (2.36 in) in diameter and flat specimens up to 70 mm ...

Grip strength: 3,080 N - 6,950 N
Stroke : 14, 25 mm

... with pneumatic actuation (hydraulic actuation available on request) • Position monitoring with inductive or magnetic position sensors • Optionally available with FKM seals for higher temperatures up ...

Grip strength: 650 N - 1,700 N
Stroke : 3, 6 mm

... life • Wedge hook principle with pneumatic actuation • Optional inductive and magnetic position sensors • Optionally available with FKM seals for higher temperatures up to 150°C (on request) • Integrable ...

Grip strength: 1,200 N - 3,250 N
Stroke : 4, 8 mm

... life • Wedge hook principle with pneumatic actuation • Optional inductive and magnetic position sensors • Optionally available with FKM seals for higher temperatures up to 150°C (on request) • Integrable ...

Grip strength: 1 kgf - 68 kgf

... than aluminum and offering mechanical strength 6 times greater . flexible material on the gripper edges, to protect both gripper and operator . foam gripping interface, for versatile product handling . ...

Grip strength: 4 kgf - 60 kgf

... exerted on the gripping point. The opening and closing speed of the fingers can be adjusted with the compressed air regulator. . DE: double action clamp using compressed air. . SEF: ...

Grip strength: 600 N - 2,200 N

The CVGL series by Coval is a Vacuum gripper which features its flexible, simple and economic characteristic. The handling parts it contains comes with different sizes, shapes and weights. Using this tool, the user is ...

Grip strength: 0 kN - 1 kN

The Pneumatic grips are suitable for various materials that are needed to be held. Their gripping force is generated specifically by pneumatic cylinders that act directly on the jaws or through a lever ...

Grip strength: 140 N - 26,050 N
Stroke : 2 mm - 45 mm

... Leakproof and corrosion protected – The universal gripper Suitable for virtually all ambient conditions, with a sealed guide up to IP67 and corrosion protection as standard, you are able to use this gripper ...

Grip strength: 6 N - 400 N
Stroke : 1 mm - 12 mm

... benchmark Optimisation of weight and force reduces your application costs since all components can have a smaller scale • - Gripper jaws up to 50% longer than the benchmark The highest force and torque measurement ...

Grip strength: 8.4 N - 5,250 N
Stroke : 3 mm - 13 mm

"The enduring" • - Proven technology We have more than 20 years of proven reliability, which ensures uninterrupted production for you • - Very short cycle times Low-friction circular guides enable very short cycle times and, therefore, ...

Grip strength: 150 N - 10,750 N
Stroke : 5 mm - 70 mm

Robust / 10 sizes Accuracy +/- 0.015mm Adjustable stroke IP rating 40 .... 65 Total stroke control Device to maintenance the gripping force Pressurization Versions up to 130 ° C

Grip strength: 123 N - 3,200 N
Stroke : 4 mm - 32 mm

Cheap Adjustable stroke Rating IP 40 Device to maintenance gripping force Pressurization Versions up to 130 ° C

Grip strength: 60, 100, 190 N
Stroke : 3, 6, 13 mm

2-finger parallel gripper Excellent stroke / gripping force ratio Gripper from 80gr Stroke from 8 to 42 mm Rating IP 40 Device to maintenance gripping force Pressurization Versions up to 130 ° C

Grip strength: 71 N - 305 N
Stroke : 30 mm - 240 mm

Handling Systems pneumatic Linear axes, rotational axes, rotary modules and grippers with either electric or pneumatic drives form the basis of our standardised pick & place handling ...

Grip strength: 36 N - 136 N
Stroke : 2 mm - 6 mm

Precision gripper PG 12 •Highly precise jaw guidance •Miniature design •Simplest operation Precision gripper PG 16 •Highly precise jaw guidance •Miniature design •Simplest operation Precision ...

Grip strength: 105 N - 407 N
Stroke : 4 mm - 6 mm

Universal gripper UG 20 •Compact and light •Third sensor for part recognition •Gripping force securing Universal gripper UG 25 •Compact and light •Third sensor for part recognition •Gripping ...

RUBBER BAG Rubber bag Categories: (De)palletiser, Bottler, Decorator, Glass factory

RUBBER BAG Rubber bag Categories: (De)palletiser, Bottler, Decorator, Glass factory

RUBBER BAG Rubber bag Categories: (De)palletiser, Bottler, Decorator, Glass factory DESCRIPTION Product description Air bag especially used for miniatures or when there is little space between necks and bottles

This gripper is a gripper for large parts, in this particular case for bagged goods and pallets

Grip strength: 10, 15, 23, 31 N

The Morali Vactec Systems has manufactured the MG grippers, suitable for use in the plastic industry, and in various applications in the field of EOAT. These devices are equipped with a very small gripper. ...

Grip strength: 10 kN

Pneumatic grips for all types of samples. The pneumatic grips are ideal for all types of flat samples such as rubber, plastic film, plastic dumbbells, paper and cardboard, sheet metal, foils, wood, fabrics ...

Grip strength: 4.6 N - 4.6 N
Stroke : 30 mm - 36 mm

The SFG flexible gripper is an innovative flexible gripper that imitates the starfish design and simulates human grasping. Realize bending deformation by inflating, cover the target object adaptively, ...

Grip strength: 8.5 N
Stroke : 25 mm - 36 mm

The SFG flexible gripper is an innovative flexible gripper that imitates the starfish design and simulates human grasping. Realize bending deformation by inflating, cover the target object adaptively, ...

The SFG flexible gripper is an innovative flexible gripper that imitates the starfish design and simulates human grasping. Realize bending deformation by inflating, cover the target object adaptively, ...

Our foam grippers offer many advantages to meet your needs: The fastest on the market: -Ultra fast gripping, -Production gain, -Reduction of energy consumption time, The lightest on the market: ...

Our foam grippers offer many advantages to meet your needs: The fastest on the market: -Ultra fast gripping, -Production gain, -Reduction of energy consumption time, The lightest on the market: -Preservation ...

Our cup grippers offer many advantages to meet your needs: The fastest on the market: -Ultra fast gripping, -Production gain, -Reduction of energy consumption time, The lightest on the market: -Preservation ...