Compression spring BIAIR®-ED-AL series

safetyfrictionair

Low-frequency (vertical from 2.5 Hz) membrane air spring with precisely adjustable damping level for effective vibration isolation. Made of anodised aluminium especially for high demands on material properties. GENERAL PRODUCT DESCRIPTION Description The BiAir® membrane air spring insulator is made of turned aluminium. The air space is enclosed by a thin-walled flexible and pressure-resistant rolling membrane. The piston sits on the membrane and is pressed into place by the air volume. This design allows for highly effective vibration isolation. In order to simultaneously achieve the greatest possible damping effect, the interior of the air spring is divided into two air chambers connected by an air hose (load and damping volume). An adjustable throttle valve is used to set the flow cross section to the desired damping effect from the outside. The friction in the air flow generated by the throttle valve can create a damping effect of up to 15 %. Damage to the rolling membrane due to overpressure is virtually impossible through the use of additional safety valves or a mechanical piston stroke limit. TECHNICAL DATA AND VARIANTS General information on the selection and application of our BiAir®-ED-AL membrane air springs The maximum permissible movement amplitude in the horizontal plane is between approximately 1 to 2 mm depending on the size of the air spring. Please select the load at an air pressure of 4 bar when selecting the air spring size. Permissible temperature range: -20 °C to +80 °C In addition to the standard solutions listed here we also offer numerous air springs with a larger stroke and lower natural frequency.