Permanent magnetic sheet separator

Pry Apart Oily, Sticky, Polished or Pre-Finished Ferrous Sheets We can manufacture custom magnetic sheet fanners engineered specifically for your production facility. Magnetic sheet fanners are customizable for you and provide a faster and safer alternative to separate ferrous sheets. The magnetic field is transferred to the steel blanks which take on the magnetic pole to repel from each other. Generation I Switchable Patented Neo Magnetic Fanners • Designed for automation lines for fanning sheets on robotic lines. • Fanners are switchable and can be turned on or off to place a new stack of sheets in position or to remove a stack of sheets. • Turned off fanners are completely non-magnetic for safe sheet movement Pry Apart Oily, Sticky, Polished or Pre-Finished Ferrous Sheets • Tapped mounting holes allows for mounting directly to framework or on retractable arm. • Available in either permanent magnetic ceramic or Neo Rare Earth. • Tapered fronts for smooth sheet movement. Pivoting Permanent Magnetic Sheet Fanners • Complete with a back support bearing frame which can be mounted to your framework. • Ideal for fanning irregular shaped parts. They pivot on the bearings around the blank stack to contact with the irregular sheets. • Available in either permanent magnetic ceramic or Neo Rare Earth. Retractable Pin Sheet Fanners • Pins at bottom of fanner extend to support the last couple of blanks as a new stack of blanks is feed up from the bottom into position. • Pneumatic pins retract so that the stack can then be raised up into the fanning position, allowing for continuous press operation.