DC current monitor DG 33 series

DIN rail mountresidual current

The Current Monitors DG 3302 and DG 3282 are used to monitor limit values of AC and DC currents. Easy configuration on front panel Measuring range and operating mode switchable, switch point and hysteresis adjustable with potentiometer Status indication by LED Easy monitoring and switching point adjustment Relay changeover contacts with high power handling or fully isolated transistor switching outputs True 4-port separation Protection against erroneous measurements due to parasitic voltages or ground loops Protective Separation acc. to EN 61010 Protects service personnel and downstream devices against impermissibly high voltage High reliability and noise immunity No microprocessor, no integrated software Extremely slim design 12.5 mm slim housing for a simple and space saving DIN rail mounting 5 Years Warranty Defects occurring within 5 years from delivery date shall be remedied free of charge at our plant The Current Monitors DG 3302 and DG 3382 are used to monitor limit values of AC and DC currents. Currents up to 6 A can be monitored directly. For higher currents, external current transformers or shunt resistors (input 30/150 mV) are connected. Two switching outputs can be configured simul­taneously or indepen­dently of each other with the analog control electronics as MIN or MAX alarm in open-circuit or closed-circuit operation. All setting elements are located behind the openable front cover and can also be operated when the unit is mounted. The switching points and the switching hysteresis can be adjusted with potentiometers. The monitoring states are indicated by yellow LEDs.