Temperature monitor DG 36 series

The Tempera­ture Monitors DG 3602 and DG 3632 are used for tempera­ture control with RTD sensors in 2-wire connec­tion. Easy configuration on front panel Measuring range and operating mode switchable, switch point and hysteresis adjustable with potentiometer Status indication by LED Easy monitoring and switching point adjustment Relay contacts with high power handling 2 fully isolated changeover contacts True 4-port separation Protection against erroneous measurements due to parasitic voltages or ground loops Protective Separation acc. to EN 61010 Protects service personnel and downstream devices against impermissibly high voltage High reliability and noise immunity No microprocessor, no integrated software Extremely slim design 12.5 mm slim housing for a simple and space saving DIN rail mounting 5 Years Warranty Defects occurring within 5 years from delivery date shall be remedied free of charge at our plant The sensor signal will be com­pared with the set limit values. In case of over­shoo­ting or under­shoo­ting, the output relays react according to the set confi­guration. Two relay outputs (synchro­nous switching) can be confi­gured as MIN or MAX alarm in open-circuit or close­dcircuit opera­tion with the analog control electronics. All setting elements are located behind the open­able front cover and can also be opera­ted when the unit is mounted. The switching points and the switching hyste­resis can be adjusted with poten­tio­meters. The monitoring states are indicated by yellow LEDs.