Electronic rotational speed monitor ED series

EDX1 is a brand new speed monitoring device exclusively designed for a belt conveyor, which monitors the rotation speed by using the optoelectronic switch or magnetic induction part. During this process, it provides an output contact SPDT for alarm or control. The alarm setting is determined by the scale on the adjustment knob, which is convenient and fast. Based on the conventional analog design, it uses a simple, stable and low-cost circuit, which makes it economical. EDX Speed Monitor use various electromechanical and electronic technology to protect equipment and personnel. These safety devices include: – SRT belt misalignment switch – SRS safety stop switch – ED series speed monitor Description The SRS/SRT/ED belt conveyor safety products work to ensure and protect equipment and personnel. The ED series is another of the Aplus Finetek belt conveyor safety products. The ED is a speed monitoring safety instrument for use in monitoring the speed of rotating devices such as rotating conveyor shafts, motor shafts, etc. The ED speed monitor will measure RPM from 1~999rpm and indicates speed on its internal display. The primary output is a 4-20mA analog signal of the measured speed that can be tied into a PLC or DCS or panel meter. An alarm relay output is also provided. Features 。ED series speed monitor with analog 4-20mA output of rpm 。Underspeed, stop, reverse blackout and overload alarm output relay, 5A@250VAC with standard ED series speed monitor 。The alarm point setting of the speed monitor adopts a knob type operation, which is simple and fast. 。Based on the field application requirements, you may select the startup delay alarm function,