magnetic float level switch / for liquids / reed switch / single-point
reed switch, single-point, brass, vertical, IP65
Min.: 0 bar (0 psi)
Max.: 10 bar (145.04 psi)
Min.: -20 °C (-4 °F)
Max.: 120 °C (248 °F)
Electromagnetic level indicators at a control point
SPST or SPDT Contact
Made to ensure, with maximum safety, the minimum or and empty levels of liquids in tanks, and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. and for all non-corrosive and inflammable liquids.
When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or disconnecting any electrical equipment connected to it.
The indicator must be fitted in the vertical position, and the float must be at least 35mm from ferrous surfaces (walls, tanks, etc.).
The tight‘s flange is ensured by a flat synthetic rubber gasket and by a locking nut. Since the diameter of the float is greater than the diameter of passage hole on the tank during installation you must fix the gauge to the tank and replace the float.