magnetic float level switch / for liquids / multi-point / reed switch
IEG-TC 1/2

{{requestButtons}}

Characteristics

  • Technology:

    magnetic float

  • Medium:

    for liquids

  • Other characteristics:

    multi-point, reed switch, brass, threaded, vertical, IP65

  • Applications:

    for tanks

  • Process pressure:

    Max.: 10 bar (145.04 psi)

    Min.: 0 bar (0 psi)

  • Process temperature:

    Max.: 120 °C (248 °F)

    Min.: -20 °C (-4 °F)

Description

Electromagnetic level indicators to one or two contacts
1/2" Bsp threaded Connection
SPST or SPDT Contacts
USE:
Made to ensure, with maximum safety, the minimum or minimum and maximum levels of liquids in tanks, and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. and for all non-corrosive and inflammable liquids.

OPERATION:
When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or disconnecting any electrical equipment connected to it.

FITTING:
The indicator must be fitted in the vertical position, and the float must be at least 35mm from ferrous surfaces (walls, tanks, etc.). The tight‘s flange is ensured by a flat synthetic rubber gasket

Other Fratelli Giacomello products

Electromagnetic Levels