Screw compressor AHB-10A

airelectricportable

Airhorse integrated 16 bar 232 PSI 4 in 1 type screw air compressor specially for laser cutting machine.
Laser-Grade Compressed Air Station – Compressor, High-Pressure Dryer, 3-Stage Filtration & Tank in One.

Your Laser Cutter Deserves More Than Just Air. It Demands “Laser-Grade” Clean, Dry 16 Bar Air.
Every time a protective lens fails, a focus lens fogs, or a cut edge comes out yellow and burred, your profitability bleeds. The root cause is almost always contaminated, wet, or pulsating compressed air. Separate components bought from different vendors rarely match perfectly under true 16 bar load — resulting in oil carryover, pressure drop, and dew point failure right when your fiber laser is cutting at full speed.

Stop the guesswork and the losses. The Airhorse 16 bar 232 PSI 4-in-1 screw air compressor is built from the ground up for the extreme demands of high-pressure laser cutting. It delivers precisely 16 bar of constant, instrument-clean, bone-dry compressed air in a single, whisper-quiet package. It’s the ultimate plug-and-play air solution that treats your laser optics as the precious investment they are.

Technical Specifications (16 Bar AHB Series)

Model: AHB-10A. Motor power: 7.5KW 10HP. Air flow: 0.48 m3/min 17 CFM. Working pressure: 16 bar 232 PSI. Size: 1785 * 840 * 1690 mm. Weight: 425 KG. Fiber Laser Cutting Machine motor power: 500W. Thickness of Material: Carbon steel 5 mm, Stainless steel 3 mm, Aluminum 2 mm, Copper plate 2 mm.

Model: AHB-15A. Motor power: 11KW 15HP. Air flow: 0.65 m3/min 23 CFM. Working pressure: 16 bar 232 PSI. Size: 1785 * 840 * 1800 mm. Weight: 475 KG. Fiber Laser Cutting Machine motor power: 1000W. Thickness of Material: Carbon steel 10 mm, Stainless steel 5 mm, Aluminum 3 mm, Copper plate 3 mm.

Model: AHB-20A. Motor power: 15KW 20HP. Air flow: 1.2 m3/min 42 CFM. Working pressure: 16 bar 232 PSI. Size: 1785 * 840 * 1800 mm. Weight: 540 KG. Fiber Laser Cutting Machine motor power: 1500-2000W. Thickness of Material: Carbon steel 16 mm, Stainless steel 8 mm, Aluminum 5 mm, Copper plate 5 mm.

Model: AHB-30A. Motor power: 22KW 30HP. Air flow: 1.75 m3/min 62 CFM. Working pressure: 16 bar 232 PSI. Size: 1785 * 840 * 1800 mm. Weight: 600 KG. Fiber Laser Cutting Machine motor power: 3000W. Thickness of Material: Carbon steel 20 mm, Stainless steel 10 mm, Aluminum 8 mm, Copper plate 8 mm.

Airhorse integrated 16 bar 232 PSI 4 in 1 type screw air compressor specially for laser cutting machine: Four Modules Synergized for 16 Bar Purity
1. High-Pressure PM VSD Screw Air end – Steady Force
Specially selected high-pressure Air end profiles deliver full-flow at 16 bar with minimal internal leakage. The direct-coupled permanent magnet motor eliminates gear and belt losses, providing a response time that keeps the tank and your laser nozzle pressure rock-solid within ±0.1 bar, even during rapid piercing cycles.

Your Benefit: No striation lines, no sudden burn-throughs caused by pressure swing. Mirror-like cut edges, batch after batch.

2. Integrated 16-Bar Refrigerated Air Dryer – Brutal Moisture Removal
Not an afterthought dryer — it is a high-pressure model perfectly sized to the compressor’s output. It uses R134a refrigerant and a stainless steel plate heat exchanger to reliably pull the pressure dew point down to +3°C. A built-in pre-cooler/re-heater ensures the outlet air is never cold enough to cause pipe sweating or thermal shock to the cutting head.

Your Benefit: Zero water droplets in your lines, zero fog on the lenses, and a dramatically extended life for your expensive optical chain.

3. Three-Stage High-Pressure Filtration Train – Oil Police
Rated for 16 bar service, the filter cascade treats every cubic inch of air leaving the tank:

High-Performance Coalescer: removes water, oil aerosols, and particles down to 0.01 micron, with residual oil content ≤0.01 mg/m³.

Activated Carbon Absorber: strips out oil vapor and hydrocarbon odors down to
Dust Filter (optional): for absolute particle-free applications.

Your Benefit: The air is so clean it can be used as a direct nitrogen substitute for thin stainless and carbon steel cutting. Say goodbye to daily lens changes.

4. Buffered Air Receiver Tank with Auto-Drain
The ASME/CE certified tank (e.g. 500L for 15kW model) is precisely sized to act as a true buffer, absorbing pulsation and minimizing motor cycling. A zero-loss electronic drain automatically ejects condensate without wasting compressed air.

Your Benefit: No constant start-stops, no water accumulation inside the tank, and stable pressure for multi-head or long-distance piping setups.

The Real Cost Saver: VSD Energy Logic for Laser Breathing
A laser cutter doesn’t consume air continuously — it breathes. During a sheet change, positioning, or idle, a fixed-speed compressor keeps running at full load and venting. Our PM VSD logic mirrors your machine’s “breathing” pattern: high torque during cutting, deep turndown during idle.
A 15kW laser shop running two shifts can easily see annual electricity savings of $2,000–$3,500. You lower your operating cost while protecting the environment.

Sound Level That Won’t Drive Your Team Crazy
Enclosed in a fully soundproof cabinet with multi-layer acoustic foam and isolated cooling airflow, the unit runs at 64-68 dB(A) . That’s comparable to a normal conversation. Place it directly next to the laser enclosure, or within the same workshop, and no one will complain. You reclaim the floor space and the expense of a remote compressor house.

Pure Plug-and-Play in Three Steps
Lift & Place: Compact footprint fits through a standard double door. No special foundation required.

Plug & Pipe: Connect the main power and run a single high-pressure hose from the integrated quick-coupler to your laser machine’s air inlet.

Touch & Go: Tap the 7-inch color touchscreen, set your desired pressure (e.g., 16.0 bar), and the unit intelligently ramps up and maintains it. All critical data is displayed in real time.

Smart Control & Remote Connectivity
The advanced controller provides multi-language interface, pressure scheduling, and detailed maintenance alerts. With the optional IoT gateway, you can monitor operating status, energy consumption, and filter life from your smartphone. Receive an instant alarm if something is amiss, preventing costly downtime.

Trusted by Laser Job Shops & Manufacturers
“Since installing the Airhorse AHB-20A, we’ve stopped replacing protective lenses every week. Our cut quality on 3mm carbon steel with shop air is now indistinguishable from nitrogen cutting. And it sits right next to the fiber laser without any noise issues.” — John, Metal Fabrication Shop Owner.

Warranty & Global Support
Complete Unit Warranty: 12 months from startup.

Air end Warranty: 18 months.

24/7 Service Network: Fault response within two hours. Remote emergency support enables video-based guidance for on-site personnel to quickly resolve minor issues, avoiding downtime spent waiting. Spare Parts 3-Day DHL Express.