Tank-mounted compressor AHB series

screwairelectric

Airhorse 4-in-1 Integrated PM VSD Screw Air Compressor
Model Series: AHB
Plug-and-Play Clean Air – Compressor, Dryer, Filters & Tank in One Compact Unit

Stop Wrestling with Complex Air Systems. Get Clean, Dry Compressed Air Right Out of the Crate.
Are you tired of sourcing a separate air compressor, refrigerated dryer, filters, and air receiver tank, only to find they don’t match? Do water droplets in your air lines damage your precision tools, ruin your laser cutting lenses, or cause costly production downtime? Does installing a traditional air station require concrete foundations, complicated piping, and extra labor you simply can’t afford?

It’s time to simplify. Airhorse 4-in-1 Integrated Screw Air Compressor delivers a complete compressed air solution that is factory-engineered, pre-piped, pre-wired, and performance-tested. It generates high-quality, dry, and oil-free compressed air directly at the point of use. Just connect power and an air line, and you’re ready to work.

Why Choose the 4-in-1 Integrated Design?

Our 4-in-1 Solution: Single compact unit, one supplier, one warranty. Perfectly matched drying capacity for guaranteed dew point. Pre-piped internally; save up to 60% installation time. Whisper-quiet, can sit right on the factory floor. Consistent ISO 8573-1 Class 1.4.1 air quality straight out. Synergized system with variable speed drive for maximum savings.

The Four Integrated Modules – Delivering Pure Value
1. The Heart: Premium PM VSD Screw Air End

Permanent Magnet Motor: Highly efficient rare-earth PM motor, direct-coupled 1:1 with the Air end, eliminating transmission losses from belts or gears.

Variable Speed Drive (VSD): The advanced inverter precisely matches air output to your actual consumption, slashing energy waste during partial load conditions by 30-50%.

Benefits for you: A pressure band as tight as ±0.1 bar, extended motor life due to soft starts, and significant savings on your electricity bill.

2. The Dehumidifier: Built-In Refrigerated Air Dryer

Equipped with an oversized heat exchanger and environmentally friendly R134a/R513A refrigerant, it reliably lowers the pressure dew point to +3°C (37°F).

The pre-cooler/re-heater design prevents condensation on the outlet pipes and boosts overall drying efficiency.

Benefits for you: Absolutely no liquid water will ever enter your distribution piping. Your solenoid valves, cylinders, and air tools are protected.

3. The Purifier: Multi-Stage Precision Filtration

Standard 3-stage filtration treats the air right after it leaves the tank:

C-Filter (Coalescing): Removes particles down to 3 micron and oil aerosols to 0.1 mg/m³.

T-Filter (Coalescing): Removes particles down to 0.01 micron and oil aerosols to 0.01 mg/m³.

A-Filter (Activated Carbon): Removes oil vapor and odor, residual oil content
Benefits for you: Outlet air quality meets ISO 8573-1 Class 1 for oil and solids. It’s safe for CNC and Automated Production Lines, Woodworking and Furniture Industry, spray painting and Sandblasting, Packaging Machinery right out of the box.

4. The Buffer: Integrated Air Receiver Tank

The ASME/CE certified carbon steel tank with internal anti-corrosion coating serves as a buffer, smoothing out air pulses and reducing the compressor’s load/unload cycling frequency.

Includes a safety valve, pressure gauge, and an automatic electronic drain valve to discharge condensate without manual intervention.

Benefits for you: More stable air pressure, less wear on the compressor, and additional energy savings.

A Business Case in Energy Savings
An air compressor’s biggest lifetime cost is electricity, accounting for over 75% of total cost of ownership. Our PM VSD technology attacks this head-on.

Real Calculation Example:
A CNC Machining Factory running 6,000 hours per year replaced a fixed-speed 15kW compressor with our AHB-15A. With an average air demand of 70%, the unit runs mostly at reduced speed. Annual electricity saving: over $2,300 USD. The unit virtually pays for its own cost difference in under 2 years. Enjoy a lower carbon footprint and higher profitability simultaneously.

Whisper-Quiet. No Compressor Room Needed.
Noise is a workplace hazard and a logistics nightmare. Our integrated unit is housed in a full-soundproof enclosure with thick, fire-retardant foam and a streamlined cooling air duct system. Operating noise is as low as 62–65 dB(A) .

Hold a normal conversation right next to it.

Place it beside your CNC, laser cutter, or packaging machine on the shop floor.

Save tens of thousands of dollars in constructing a dedicated, soundproofed compressor room.

Experience True "Plug & Play"
Position the unit with a forklift. Its compact footprint (e.g., 1750 * 810 * 1570 mm for the 7.5kW model) fits through a standard doorway.

Connect the power cable to the integrated disconnect switch, and attach your main air hose to the quick-coupling or threaded outlet.

Press Start on the intuitive 7-inch color touchscreen. That’s it. You have certified clean, dry air.

All maintenance points (filter elements, oil fill/drain, dryer condenser cleaning) are accessible from a single, wide-opening front door.

Smart Control & Remote Monitoring
The on-board controller is a data powerhouse. Set pressure, schedule weekly timers, and view maintenance logs with a few taps. With the optional IoT module, you can:

Monitor real-time current, voltage, power, and compressed air flow rate.

Receive automatic fault alarms and maintenance reminders on your smartphone.

Let us provide predictive maintenance support, maximizing uptime.

Trusted by Users Across Industries
From precision electronics and CNC laser cutting to food packaging and automotive shops, our 4-in-1 integrated compressor is the preferred choice for businesses that demand dry, clean, and stable air without the hassle.

Case in Point: A laser cutting service bureau replaced their 15kW piston compressor and separate dryer. They saw no more moisture-related lens failures, a 38% drop in energy consumption, and reclaimed 15 square meters of floor space.

Warranty & Global Support
Complete Unit Warranty: 12 months from startup.

Air end Warranty: 18 months.

24/7 Service Network: Fault response within two hours. Remote emergency support enables video-based guidance for on-site personnel to quickly resolve minor issues, avoiding downtime spent waiting. Spare Parts 3-Day DHL Express.