Holding solenoid GCH-25.06

bistable

Bistable selfholding solenoid Open frame return stroke solenoid for highest demands. Two discreet positions maintained without the continuous application of current. Specifications Ratedvoltage 24VDC Permanentholdingforce(currentless) ≥25N Coils individually controlled Standardmode Operatingmode Powerrequirement 72W Dutycycle%(cycletime30s) 5% Pull-force 6N Operatingtime 50ms push + red -blue pull + black - white Operatingmode Coils parallel; reverse polarity required Powermode Powerrequirement 144W Dutycycle%(cycletime30s) 3% Pull-force 12N Operatingtime 45ms push +red/white -blue/black pull + blue/black - red/white Class of insulation B (130°C) DIN VDE 0580 Test voltage EN 60664-1 Surge category III Degree of protection IP20 (IEC 60529) Electrical termination Lead wires (300mm), AWG24 Surface treatment Solenoid housing zinc plated & trivalent chrome passivated Moving mass0.009kg Total weight of solenoid 0.082kg Notes 1) Solenoids manufactured and tested according to DIN VDE 0580 2) Forces indicated measured at 20°C ambient and operating temperature with 90% of its rated voltage, in horizontal position 3) Force values for reference only and can differ ±10% as a result of natural dispertion 4) Special designs are available 5) All specifications are subject to change without notice 6) Compliant with RoHS; free of halogenes (PVC) 7) Our „Technical Explanations“ provide information about the use of solenoids as well as to general installation and safety instructions