Adhesion tester CZY-G

for packagingfor medical devicesfor pharmaceutical applications

The Initial Adhesion Tester CZY-G is suitable for pressure-sensitive tapes, medical patches, self-adhesive labels, protective films, and other related products for initial tack testing. It employs two methods: the inclined rolling ball method and the inclined groove rolling ball method. - It is used to test instantaneous adhesion of samples with the test principle of inclined surface rolling ball method. - Two Testing Methods of method A as inclined surface Rolling Ball Method and method B as Slot Rolling Ball Method. - The test balls are designed in full accordance with the standards to ensure the accuracy of test data. - Testing tilt angle can be adjusted freely from 0 degree to 60 degree according to user's requirement. The initial viscosity is measured with the touch of steel balls and the viscous surface of the sample. The steel ball rolls over the surface of the sample which is laid on an inclined plate. Then, evaluate the tack of the ball with the maximum length of the sticky surface to obtain the viscous measurement. Roll a steel ball of a predetermined size through an inclined groove, measure the distance rolling on the adhesive surface of the adhesive tape of a horizontal plate, and evaluate the size of the initial tack. This test instrument conforms to many national and international standards: JIS-Z-0237, GB/T 4852, YY/T 0148. Angle Range: 0 ~ 60° Panel Width: 120 mm Testable Area Width: 80 mm Standard Steel Ball: 29 pieces Instrument Dimension: 140mm(W) x 320mm(D) x 180mm(H) Net Weight: 6 kg Configurations: Instrument, 29 Steel Balls, Method B Screw Jinan Saicheng is always dedicated to the innovation and improvement of product performance and function. Therefore, technical specifications are subject to change without further notice. Jinan Saicheng reserves the rights of final interpretation and revision.