Benchtop testers

... Marposs E.D.C. has been designing end-of-line testing systems for electric motors for over sixty years, with more than 700 systems installed and operating worldwide.

AMT5 is an automatic system for the electrical and functional ...

... Perform accurate breakdown and withstand voltage tests on mineral, ester, and silicone insulating liquids. The OTS PB and OTS AF insulating oil test sets are a range of automatic oil test sets that perform accurate dielectric breakdown voltage tests ...

... The MPCC230 Megger pro circuit checker is a True RMS voltage measurement device with RCD, touch voltage and Loop test. The MPCC230 is a multifunctional, pocket-sized circuit checker for verifying electrical installations. It functions as a TRMS multimeter ...

... Density testing is made simple with the TA Instruments fully Automated Density Tester. Density testing is made simple with the TA Instruments fully Automated Density Tester. This fully programmable, automated system ...

... from two to three samples.

Intelligent Control System

• 10" medical-grade touchscreen with desktop OS for straightforward operation.
• Fully automated test sequences with automatic data saving and

... for repeatable results.

Intelligent Control System

• 10" medical-grade touchscreen with desktop OS for intuitive operation.
• Fully automated test sequences with automatic data saving and multi-level

C206H Oxygen Transmission Rate Test System is designed and manufactured based on the coulometric sensor method and conforms to ASTM D3985. This instrument can be used to measure the oxygen transmission rate (OTR) of barrier materials with high and medium ...

The OX-TRAN 2/22 series of 2-cell high-performance analyzers can test the oxygen transmission rate (OTR) on both films and packages from low to very high-level barriers. The oxygen permeation analyzers for packages and films are easy to use and offer ...

The OX-TRAN 2/40 series is the next evolution in whole package testing for Oxygen Transmission Rate (OTR). These advanced analyzers integrate MOCON’s proven OTR analyzer system with a precision environmental chamber to elevate package testing to the next ...

The OX-TRAN 2/48 series of Oxygen Transmission Rate (OTR) analyzers are designed for ambient testing of complete packages or other 3-dimensional samples. These 8 cell instruments provide high throughput to increase the testing capacity of your laboratory. ...

... DT Light series is the perfect entry-level device into the world of dissolution testing. Perfect Entry-Level Dissolution Tester High-head with 6 test stations Dimensions (W x D x H): 510 mm x 450 mm x 660 mm Weight: 30 kg 100% ...

... The ERWEKA DT 950 series is our first digital dissolution tester on the market, equipped with the latest technology for the requirements of today and the challenges of tomorrow. With state-of-the-art embedded PC technology, the DT ...

... ERWEKA's flow-through cell tester DFZ II can be used for various applications thanks to its wide range of available cell types, e.g. for testing poorly soluble products or low-dose formulations with sustained release. Innovations such ...

... The Huazheng VLF Multifunction Hipot Tester is an industrial high-voltage test instrument for VLF AC dielectric withstand testing, Tan Delta measurement and optional DC/partial-discharge diagnostics on cables and HV components. It uses ...

... • Multiple output frequencies: 0.1Hz, 0.05Hz, 0.02Hz, 0.01Hz • High load capacity: up to 5.5 µF at 0.01 Hz • Measurement accuracy: ±3% • Positive/negative peak voltage error: ≤3% ± 3kV • Waveform distortion: ≤5% • Wide operating conditions: -10℃ to +40℃, ...

... The HZ2613 Transformer Short-Circuit Impedance and No-Load Integrated Tester is the latest product launched by our company. The instrument uses a popular ARM processor with a 168 MHz main frequency and 128 MB of memory, expandable with ...

... SANWOOD Temperature Forcing System for Semiconductor and Electronic Component Testing

Product Overview

The SANWOOD SMS-810-10S Temperature Forcing System delivers localized hot and cold air for semiconductor ...

... and is suitable for limited in‑factory testing and thinner materials.

Application
This manually operated tester is intended to assess drawing properties of ferrous and non‑ferrous metals and foils; it is particularly ...

... Technical description
The Original TABER® STIFFNESS TESTER 362 T (150‑T) is the industry reference for bending stiffness testing and is cited in many standards. Developed by Taber in 1937 and continuously updated, it is designed ...

... made of rigid PVC. This device is delivered in a plastic case. The Model 312 conical mandrel bending tester is a compact and robust painted-steel tabletop unit. The conical mandrel and the counter-roller, which can be ...

... Product Description
Model 60098-HD is a laboratory-grade wear-resistance tester designed for unglazed ceramic tiles and mosaics. The instrument performs standardized abrasive wear tests in compliance with GB/T3810.6—2016 and ...

... Product description
The 8034-HD Needle Penetration Force Tester measures the penetration force of disposable injection needles. Designed for quality control, R&D and incoming inspection in medical device production, it supports ...

... Product description
The 8031-HD resistance-to-break tester is designed to determine toughness and resistance-to-break of syringe needles, prefilled syringe needles and infusion needle tubes. It is suitable for medical device ...

... 6600H, S 6600U and KT 6680U are universal safety testers designed for comprehensive electrical safety testing in laboratories, workshops and production environments. The S 6600H and S 6600U are modern desktop devices; ...

... The P 6600U and P 6600H ground bond testers are outstanding solutions for carrying out ground bond tests and combine advanced technology with sophisticated design. Both devices are designed as modern desktop devices that ...

... The IS 6600H and IS 6680H insulation testers are outstanding solutions for carrying out insulation measurements and combine advanced technology with sophisticated design. The IS 6600H is a modern desktop device, while ...

... Overview
The Qscratch 20 GO is a semi-automatic macro/micro scratch tester designed for standardized quality control of coatings and surfaces. It supports single measurements with progressive or constant load and provides traceable, ...

... Introduction
The Qscratch 20 is a fully automatic macro/micro scratch tester for quality control of coatings, functional surfaces and components subject to critical loads. The system combines controlled force application, precise ...

... State-of-the-art of Uniformity & Polarization Tester according to Standards. Smart_ Tester allows a complete Polarization Axis and Transmittance Uniformity Check for SunLenses, SunGlasses, Masks and SkiGoggles according ...

... Automatic Uniformity Tester according to ISO 12312-1, GB 39552.1, ANSI Z80.3, ISO 16321-1, EN 174 & ISO 18527-1 Easy_ Tester_Pro is the Worldwide Optical Market Standard Device that performs a complete and automatic ...

... Polarization Axis Tester for Optical Industry According to International Standard ISO 12312-1 Smart_Polar checks the Polarized Filters for SunGlasses, Masks and SkiGoggles in accordance to International Standards Automatic & Multi-Purpose Smart_Polar ...

With unmatched precision, speed, and versatility ERAVAP is the instrument of choice for vapor pressure testing of e.g. gasoline, crude oil, LPG, solvents, fragrances, or aqueous solutions in full compliance with the latest international standards. With ...

ERAVAP FOR CRUDE OIL is the leading solution for high precision vapor pressure and density (ASTM D4052) testing of live and dead crude oils according to ASTM D6377, IP481 and GOST 52340. Its unique cell design allows high shaking speeds ensuring unrivaled ...

... ERAFLASH is the definitive, future-proof replacement for Pensky-Martens (D93) testers, utilizing the Continuously Closed Cup (CCCFP) method for maximum safety and speed. It delivers lab-grade precision in full compliance with ASTM D6450, ...

... The Elcometer 1615 Variable Impact Tester is a simple to use gauge ideal for evaluating the resistance of a coating to impact (elongation, cracking or peeling). • Heavy-duty passivated base plate and anodised arm for long life ...

... Insulation Testers RCD Testers Loop Testers Wiring Check Included calibration checksheet for your instrument Designed with low cost, portability and ease of use in mind, the 2080 provides on or ...

... 500V Leakage current @ 230V Re-defining rapid safety testing, the Transmille 6080A battery powered portable appliance tester provides simple, fast and safe PAT testing for both independent contractors and in house safety testing. ...

... @ 500V Leakage Current @ 230V Re-defining rapid safety testing, the Transmille 5080 battery powered portable appliance tester provides simple, fast and safe PAT testing for both independent contractors and in house safety testing. ...

... Our brand new hire tester, the D255 continues the tradition set by the original B255 series of test equipment to provide the industry standard appliance test solution for the Equipment Hire and Service/ Repair Industries. Improving ...

... that the SECUTEST has been in use by our customers for more than 20 years in some cases – and it’s the best-selling safety tester for all devices up to 400 V with and without plug. • Preconfigured and user programmable test sequences ...

... that the SECUTEST has been in use by our customers for more than 20 years in some cases – and it’s the best-selling safety tester for all devices up to 400 V with and without plug. • Preconfigured and user programmable test sequences ...

... With auto-ranging up to 1500 V / 20 A / 30 kW The PROFiTEST-PV permits measurement of characteristic IU curves from individual photovoltaic modules, as well as from strings. onnect > Switch On > Start Measurement > Read Results > Done! With the ...

The BA1500 has been specially designed to analyse all lead-Acid battery chemistry in the Aviation industry. The icon based 4,3” touchscreen control display allow any technician to begin as an expert. No training is required to operate the instrument. ...

... pneumatic insulating glove tester is a tool recommended for inspecting insulating gloves used in electrical environments. It is used before and after each use, as well as for periodic visual inspections. This pneumatic tester ...

... The Alluris FMT-W40 motorised wire-terminal pull- tester is designed for crimped wire terminal testing according to IPC/WHMA-A-620, UL 486, ASTM B913, USCAR 21, EN 2591-417, MIL-STD 202-H, NASA 8739-4 and many more relevant standards. Two ...

... Mecmesin's Page Pull Tester, formerly known as the Smithers Pira Booktester, enables the evaluation of the page adhesion quality of so-called perfect-bound books and magazines. This dedicated product is quick and easy to use, and requires ...

... Product Introduction
HST-01B Heat Seal Tester is a laboratory instrument designed to determine optimal heat-sealing parameters — dwell time, sealing pressure and sealing temperature — for plastic films, flexible composite films, ...

... Introduction
CZY-01 Adhesive Tack Tester (Rolling Ball Tack Tester) is designed to measure tack of pressure-sensitive tapes, medical patches, self-adhesive labels, protective films and similar products. It provides ...

... Product Introduction
This instrument is developed, designed and manufactured on the electrolytic test principle in accordance with GB/T 21529, ISO 15106-3 and related standards. It measures the water vapor transmission rate (WVTR) of samples ...

... Application
W413 2.0 water vapor permeability tester is designed to measure the water vapor transmission rate (WVTR) of films and sheet materials under controlled temperature and humidity conditions.

Applied ...

... test chambers water vapor permeability analyzer using infrared sensor is the highest accurate water vapor transmission rate tester, meeting standard of ASTM F1249. 1) Plastic film, composite film, aluminum foil, aluminized film,etc; 2) ...

... Product overview
The Universal Friction Tester (UFT) by Rhopoint Instruments is a benchtop instrument for fast, repeatable measurement of static and dynamic coefficient of friction (COF). It supports peel, tear ...

... Product description
CIT27-10S Self-Accelerating Decomposition Temperature Tester performs adiabatic storage tests to determine the temperature-dependent heat generation rate of substances and to establish the Self-Accelerating ...

... description
CIT23-10S liquid auto‑ignition point tester measures the auto‑ignition and flame behavior of liquid chemicals in a uniformly heated vessel at atmospheric pressure. The tester is built to perform tests ...

... Product description
The CIT22-10S solid ignition point tester identifies spontaneous combustion characteristics by placing a solid sample in a steel mesh cube (20 mm side) inside a heating chamber with a controlled temperature ...

... The DBF multi-frequency induction withstand voltage tester is designed for induction dielectric withstand tests on transformers and mutual inductors. It is portable, easy to operate and available in multiple power ratings for on-site ...

... .How accurate and repeatable are the test results of the Automatic Closed Cup Flash Point Tester?

• The Automatic Closed Cup Flash Point Tester uses a high-precision temperature sensor and intelligent

... Analyzer

• Multifunctional:

... The W309 Water Vapor Permeability Tester is based on the gravimetric determination method (Cup Method) and can be used to test the water vapor transmission rate of plastic films, composite films, sheets, packages, bottles and other materials ...

... Product Introduction
The Luer Taper Conical Fittings Multipurpose Tester Luer-C2 is designed for laboratory and production-line qualification of locking and non-locking Luer connectors used in syringes, needles, catheters and ...

... RT-01 Ink Rub Tester is designed for the abrasion resistance of surface coating layers of printed materials, such as ink layer or photosensitive coating. The tester could effectively analyze the problems of poor abrasion ...

... power off function: The timer operates automatically about 3 minutes when the " Test Button Switch " are pressed to keep the tester power on. 2mA measuring current permits earth resistance tests without tripping earth leakage current ...

... The Corrosion Test Apparatus is developed to assess the amount of acid gas generated from the combustion of materials by measuring the pH & electrical conductivity. The test specimen is pushed into a tube furnace and burned for 30 minutes. The generated ...

... Methylene Chloride Tester is used to determine the resistance of PVC-U pipes to dichloromethane at a specified temperature. Standard: ISO 9852,EN580 Specification: Stainless steel inner tank Dia: 340mm, height: 280mm Sample ...

... Vicat Softening Point Apparatus is used to determine heat distortion temperature and vicat softeningtemperature of high polymer materials, plastic,rubber etc, as an index of controlling quality and identifying thermal property of new products. Sample ...

The DX-2012F is a multi-dimensional, high-precision, fully automatic digital magnetic field measurement system designed to map three-dimensional AC and DC magnetic field distributions for objects and volumes of arbitrary shape. It acquires, visualizes ...

... GBW-60B Computer Control Cupping Testing Machine GBW-60B computer control cupping testing machine mainly for the test of the metal sheet and strip, according to the national standard GB / T 4156-2007, it can test the plastic deformation properties of ...

... thanks to its reliability, ease of use, and low operating cost. Description ATS Tube Seal Tester – A destructive test to guarantee quality The ATS seal tester is designed to evaluate the quality and strength of tube ...

... The ATS-X is the electronic weld integrity inspection tool for plastic and metalloplastic tubing, and veriies that there is no leakage under the effect of a crushing force applied to the test sample. Like ATS, ATS-X is necessary for reliable and accurate ...

... The ATS 3 heads is the tool to control the weld strength of plastic and metal-plastic pipes directly on the production line or in the laboratory. The weld integrity is verified by the absence of leakage under the effect of a crushing force applied ...

... Widely used in medical treatment, medicine, packaging, food, plastic film and sheet processing and manufacturing industries, as well as scientific research units, quality inspection departments and schools, etc. Standard GB/T 10006 ISO 8295 Features It ...