Laboratory testers

... chamber, a cell cycler in the appropriate current and voltage range, and an software automation system, for running entire laboratories with several thousand cell test channels. Special equipment such as Electrochemical Impedance Spectroscopy ...

... Marposs E.D.C. has been designing end-of-line testing systems for electric motors for over sixty years, with more than 700 systems installed and operating worldwide.

AMT5 is an automatic system for the electrical and functional ...

... precision, shatterproof test vessels that are easy to clean and provide repeatable results, whether used in the field or laboratory. They also have a transparent, shielded lid and a large test chamber, giving easy access to the test vessel ...

... life while reduing the need for cleaning and maintenance, increasing safety and greatly simplifying day-to-day work at the laboratory. Sample holder for rod-shaped and flat samples Semi-automatic calibration Automated measurement ...

... Density testing is made simple with the TA Instruments fully Automated Density Tester. Density testing is made simple with the TA Instruments fully Automated Density Tester. This fully programmable, automated system ...

... High-throughput OTR & WVTR tester with 6 test cells for simultaneous measurement, greatly increasing efficiency compared to conventional 1–2 cell systems. Equipped with patented Coulometric oxygen and infrared moisture sensors, ensuring ...

C403H Oxygen /Water Vapor Transmission Rate Test System is based on the testing principle of Coulometric oxygen sensor and infrared water vapor sensor. It is designed and manufactured according to ASTM D3985、ASTM F1249，ISO 15106-2 and other relevant standards ...

... standalone without a dedicated computer.

The OX-TRAN 2/22 series of 2-cell high-performance analyzers can test the oxygen transmission rate (OTR) on both films and packages from low to very high-level barriers. The oxygen permeation analyzers for packages and films are easy to use and offer ...

The OX-TRAN 2/40 series is the next evolution in whole package testing for Oxygen Transmission Rate (OTR). These advanced analyzers integrate MOCON’s proven OTR analyzer system with a precision environmental chamber to elevate package testing to the next ...

The OX-TRAN 2/12 series analyzers can test the Oxygen Transmission Rate (OTR) on both films and packages from low to high barriers. These analyzers are a lower cost option for reliable OTR analysis. The oxygen permeation measurement systems feature 2 ...

... The ERWEKA DT 950 series is our first digital dissolution tester on the market, equipped with the latest technology for the requirements of today and the challenges of tomorrow. With state-of-the-art embedded PC technology, the DT ...

... sophisticated features such as TestAssist and the direct transfer of balance data make the TAR II the most advanced friability tester on the market. The high-resolution 7-inch touch display with modern user interface draws the user's ...

... The devices of the ERWEKA granulate flow tester family were developed to determine the flow behaviour of powders and granules using various measurement methods. As an entry-level device, the GTL is ideal for USP/EP-compliant measurement ...

... External Type-T and Type-K thermocouples provide feedback from a defined sample location.

Positioning and Laboratory Integration

Motorized vertical adjustment and pneumatic thermal-head actuation support ...

... and is suitable for limited in‑factory testing and thinner materials.

Application
This manually operated tester is intended to assess drawing properties of ferrous and non‑ferrous metals and foils; it is particularly ...

Electro-hydraulic Erichsen cupping machine – Model 102 is a sheet metal testing machine designed for Erichsen cupping and bore expanding tests, capable of applying up to 60 kN (102-60) / 80 kN (102-80) tensile force. It features an electro-hydraulic drive, ...

... Product overview

The UV-BOX 636 is an accelerated weathering tester for UV aging and moisture condensation designed to reproduce the effects of sunlight, dew and rain on durable materials. It uses fluorescent UV lamps to ...

... The Huazheng VLF Multifunction Hipot Tester is an industrial high-voltage test instrument for VLF AC dielectric withstand testing, Tan Delta measurement and optional DC/partial-discharge diagnostics on cables and HV components. It uses ...

... transformation ratios in transformers, our company has developed the HZ2162 DC Resistance and Transformer Turns Ratio Integrated Tester. This instrument features a one-time wiring setup, allowing both the transformation ratio test and ...

... Operating Temperature: 0–45℃ • Operating Humidity: <75% RH • Dimensions: 465×385×425 mm The insulating oil dielectric strength tester is designed for routine testing of insulating oil breakdown voltage, widely applied in power systems, ...

... Product description
The 8031-HD resistance-to-break tester is designed to determine toughness and resistance-to-break of syringe needles, prefilled syringe needles and infusion needle tubes. It is suitable for medical device ...

... Product overview
The 5104-HD is an automatic condom thickness tester designed for precise, repeatable thickness measurement of latex and similar film materials in production and laboratory quality-control environments. ...

... Product overview
The 5033-HD Flushability Tester is designed to evaluate the dispersibility and degradation behavior of disposable sanitary non-woven materials in a toilet-like environment, including wet toilet paper, toilet ...

... Overview
The S 6600H, S 6600U and KT 6680U are universal safety testers designed for comprehensive electrical safety testing in laboratories, workshops and production environments. The S 6600H and S 6600U are ...

... In addition to its compact size, the ST 6600B surge tester impresses with its enormous performance - at an unbeatable price. It is ideal for detecting short circuits and insulation faults within a winding even before the fault affects ...

... ideally integrated into existing racks. The S 6700H tester is equipped with a country-specific mains socket on the front panel for connecting the device under test. In contrast, the S 6700U tester has laboratory ...

... Overview
The Qscratch 20 GO is a semi-automatic macro/micro scratch tester designed for standardized quality control of coatings and surfaces. It supports single measurements with progressive or constant load and provides traceable, ...

... measurement and other microscopic evaluation tools integrated in Qpix Inspect

For laboratories
Designed for laboratories making critical surface-related decisions: standardized scratch tests ...

... State-of-the-art of Uniformity & Polarization Tester according to Standards. Smart_ Tester allows a complete Polarization Axis and Transmittance Uniformity Check for SunLenses, SunGlasses, Masks and SkiGoggles according ...

... Automatic Uniformity Tester according to ISO 12312-1, GB 39552.1, ANSI Z80.3, ISO 16321-1, EN 174 & ISO 18527-1 Easy_ Tester_Pro is the Worldwide Optical Market Standard Device that performs a complete and automatic ...

... Polarization Axis Tester for Optical Industry According to International Standard ISO 12312-1 Smart_Polar checks the Polarized Filters for SunGlasses, Masks and SkiGoggles in accordance to International Standards Automatic & Multi-Purpose Smart_Polar ...

... 12185 compliant • True Portability: Portable, rugged and lightweight: the perfect solution for terminals and mobile laboratories ...

... ERAFLASH X is the future-proof replacement for ASTM D93 Pensky-Martens testers. Tailored for the petroleum industry all kinds of liquids can be tested over the wide temperature range of 18 °C to 370 °C using only 2 mL of sample. The full ...

... ERAFLASH is the definitive, future-proof replacement for Pensky-Martens (D93) testers, utilizing the Continuously Closed Cup (CCCFP) method for maximum safety and speed. It delivers lab-grade precision in full compliance with ASTM D6450, ...

... 500V Leakage current @ 230V Re-defining rapid safety testing, the Transmille 6080A battery powered portable appliance tester provides simple, fast and safe PAT testing for both independent contractors and in house safety testing. ...

... The CETA flow testers can be used to measure volume flow rates using compressed air as test medium. The measuring method uses the fact that the pressure difference between two measuring points in a laminar flow is directly proportional ...

... that the SECUTEST has been in use by our customers for more than 20 years in some cases – and it’s the best-selling safety tester for all devices up to 400 V with and without plug. • Preconfigured test sequences for testing electric ...

... Computer connections: HDMI, USB port • Ethernet Designed for laboratory use The ADSE 740 Pitot Static Tester is a high precision Pitot/Static Air Data Test Set for workshops and laboratories. ...

... Pitot-Static tester for laboratories and workshops The ADSE 741 is a complete high performance three channel Ps, Pt and AoA stand-alone test bench specially designed to be used in a workshop or laboratory ...

... Product Introduction
HST-01B Heat Seal Tester is a laboratory instrument designed to determine optimal heat-sealing parameters — dwell time, sealing pressure and sealing temperature — for plastic films, flexible ...

... Introduction
CZY-01 Adhesive Tack Tester (Rolling Ball Tack Tester) is designed to measure tack of pressure-sensitive tapes, medical patches, self-adhesive labels, protective films and similar products. It provides ...

... Product introduction
W203 2.0 is developed on the electrolytic test principle and is designed and manufactured in accordance with GB/T 21529, ISO 15106-3 and other international standards. It measures water vapor transmission rate (WVTR) of ...

... Coulometric method OTR Tester

Product Introduction
The Y310L is designed and manufactured on the coulometric oxygen sensor principle and meets GB/T 19789, ASTM D3985 and related standards. Equipped with an imported ...

... Introduction
N600T Air Permeation Resistance Tester is designed according to GB/T 44587-2024. Based on the differential pressure test principle, it is intended for measuring air permeation resistance of oxygen absorber packaging ...

... Summary
Measures the minimum film forming temperature (MFFT) of water‑based coatings, including latex, emulsions and adhesives. Operating range -10°C to 90°C. Platen dimensions 483 mm × 235 mm. Integrated air drying system and water cooling. ...

... Product description
CIT27-10S Self-Accelerating Decomposition Temperature Tester performs adiabatic storage tests to determine the temperature-dependent heat generation rate of substances and to establish the Self-Accelerating ...

... auto‑ignition point tester measures the auto‑ignition and flame behavior of liquid chemicals in a uniformly heated vessel at atmospheric pressure. The tester is built to perform tests in accordance with ASTM E659‑78 (2005) ...

... Product description
The CIT22-10S solid ignition point tester identifies spontaneous combustion characteristics by placing a solid sample in a steel mesh cube (20 mm side) inside a heating chamber with a controlled temperature ...

... switchgear, insulators and bushings

... providing high dielectric strength and a rated local discharge capacity ≤ 5PC. The series is compact, lightweight and designed for laboratory and production high-voltage testing, with technical indicators compliant with JB3570-98.

Application
...

... integrated overvoltage and comprehensive protection functions to ensure instrument safety and repeatability in field and laboratory environments.

Technical specifications

• Model: UHV-5A
• Type:

... The Battery Diaphragms Gas Permeability Tester is based on the differential pressure method (Oken Type), and is professionally applicable to the determination of air permeability of battery diaphragms, breathable films, and other relative ...

... The G101 Gas Permeability Tester is based on the differential pressure method and is professionally applicable to the determination of permeance and permeability of plastic films, composite films, high barrier materials, sheeting, metal ...

... The G103H Gas Permeability Tester is based on the differential pressure method and is professionally applicable to the determination of gas transmission rate and permeability of plastic films, composite films, high barrier materials, ...

... Vicat Softening Point Apparatus is used to determine heat distortion temperature and vicat softeningtemperature of high polymer materials, plastic,rubber etc, as an index of controlling quality and identifying thermal property of new products. Sample ...

... and other magnetic assemblies.

• PC-controlled automated scanning and data acquisition

... evaluation and testing of ferroelectric and piezoelectric materials and related devices.

DXPCT-A pyroelectric coefficient tester
The DXPCT-A integrates heating, measurement fixture, display and control software in a single ...

... GBW-60B Computer Control Cupping Testing Machine GBW-60B computer control cupping testing machine mainly for the test of the metal sheet and strip, according to the national standard GB / T 4156-2007, it can test the plastic deformation properties of ...

... thanks to its reliability, ease of use, and low operating cost. Description ATS Tube Seal Tester – A destructive test to guarantee quality The ATS seal tester is designed to evaluate the quality and strength of tube ...

... heads is the tool to control the weld strength of plastic and metal-plastic pipes directly on the production line or in the laboratory. The weld integrity is verified by the absence of leakage under the effect of a crushing force applied ...

... The PouchTube Tester can be used to check the performance of tubes, pouches and other refills directly on the production line or in the laboratory. It can be used to replace ATS tube weld testers. During ...

... Hydrostatic Pressure Tester is mainly used for long-term internal pressure resistance test and hydraulic instantaneous burst test of various fluid transportation pipes such as thermoplastic pipes, composite pipes, steel pipes, engineering ...

This instrument is widely used to measure the impact resistance of various plastic pipes (such as water supply and drainage pipes, sewage pipes, gas pipes, communication pipes, such as PVC, PE, etc.). It is an ideal testing instrument for testing institutions, ...

... The JJRST series ring stiffness tester is suitable for the measurement of the ring stiffness of thermoplastic pipes with a circular cross-section, as well as for flat test and ring flexibility test. Meet the requirements of testing standards ...