R&D testers

... High-throughput OTR & WVTR tester with 6 test cells for simultaneous measurement, greatly increasing efficiency compared to conventional 1–2 cell systems. Equipped with patented Coulometric oxygen and infrared moisture sensors, ensuring ...

... testing principle of Coulometric oxygen sensor and infrared water vapor sensor. It is designed and manufactured according to ASTM D3985、ASTM F1249，ISO 15106-2 and other relevant standards to provide high precision and high efficiency ...

... BTY-B3P Gas Permeability Tester is based on the differential pressure method, and is professionally applicable to the determination of gas permeability of battery diaphragms, breathable films and other relative polymer products. Applications ...

... manufacturers, installers, maintenance firms, industry, R& D centres and infrastructure. Specially adapted for checking insulation on rotating machinery with a 12 kV power supply or higher, the C.A 6550 complies with ...

... manufacturers, installers, maintenance firms, industry, R& D centres and infrastructure. Specially adapted for checking insulation on rotating machinery with a 12 kV power supply or higher, the C.A 6550 complies with ...

The OX-TRAN 2/22 series of 2-cell high-performance analyzers can test the oxygen transmission rate (OTR) on both films and packages from low to very high-level barriers. The oxygen permeation analyzers for packages and films are easy to use and offer ...

The OX-TRAN 2/40 series is the next evolution in whole package testing for Oxygen Transmission Rate (OTR). These advanced analyzers integrate MOCON’s proven OTR analyzer system with a precision environmental chamber to elevate package testing to the next ...

The OX-TRAN 2/12 series analyzers can test the Oxygen Transmission Rate (OTR) on both films and packages from low to high barriers. These analyzers are a lower cost option for reliable OTR analysis. The oxygen permeation measurement systems feature 2 ...

... and is suitable for limited in‑factory testing and thinner materials.

Application
This manually operated tester is intended to assess drawing properties of ferrous and non‑ferrous metals and foils; it is particularly ...

Electro-hydraulic Erichsen cupping machine – Model 102 is a sheet metal testing machine designed for Erichsen cupping and bore expanding tests, capable of applying up to 60 kN (102-60) / 80 kN (102-80) tensile force. It features an electro-hydraulic drive, ...

... li>Standard sample holder

Standards

• ASTM D4587
• ASTM D4799
• ASTM D5208
• ASTM D6662
• ASTM G53
• ASTM D4329
• ASTM

... interface for rapid setup, waveform capture, schmoo plotting, and test-program creation.

Applications

• R&D laboratories
• Device qualification
• Engineering validation and characterization

... Ambient temperature: -60 °C to +180 °C
R&D Pressure Pulsation Test Stand for H2 Components up to 2000 bar

• For pressure tests according to EG79 / EU406 – Section 4.2 and ECE R134
• Pressure

... more: simultaneous measurement of vapor pressure (ASTM D5191) and density (ASTM D4052) with a single, portable analyzer. Your features at a glance: • Unmatched precision & accuracy ( r=0.15 kPa / R=0.5 ...

... The Elcometer 1506-B Cylindrical Mandrel Bend Tester is robust and used to determine the elasticity, adhesion and elongation properties of cured coatings on sheet metal. The frame has a bending lever with height-adjustable rollers ...

... Cupping Tester has a 27mm (1.06”) diameter hardened steel die in a clamping device and a 20mm (0.79”) diameter punch. A hand-rotated crank and reduction drive moves the punch progressively into the sample. The Elcometer 1620 Cupping ...

... The Elcometer 1500 Cylindrical Mandrel is a simple instrument for determining the elasticity, adhesion and cracking of dry paint on flat specimens, consisting of a mandrel support which also serves as a test stand. Coated metal sheets, maximum 150mm ...

... control and R& D applications.

Technical Specifications

• Standards satisfied: GB/T3810.6—2016; ISO10545-6:2010 (non-glaze tiles and mosaic wear-resistance test)
• Model: 60098-HD
• Grinding

... Product description
The 8034-HD Needle Penetration Force Tester measures the penetration force of disposable injection needles. Designed for quality control, R& D and incoming inspection in medical ...

... Product description
The 8031-HD resistance-to-break tester is designed to determine toughness and resistance-to-break of syringe needles, prefilled syringe needles and infusion needle tubes. It is suitable for medical device ...

... The CETA flow testers can be used to measure volume flow rates using compressed air as test medium. The measuring method uses the fact that the pressure difference between two measuring points in a laminar flow is directly proportional ...

... Vibration tester is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. It ...

... Mobile battery tester for voltage measurement; measurement for the electrical internal resistance and the electrochemical impedance of a battery block; capacity test via logging of current values and voltage curves; integrated Bluetooth ...

... products in compliance with the current USP methods 1 and methods 2 as well as with EP , DIN EN ISO 787-11, ASTM B527 and ASTM D7481.18. The instrument automatically calculates the tapped density, Hausner flowability ratio and Carr ...

... transformer windings and high‑power inductive equipment, suitable for workshop testing, R& D and field maintenance.

Technical parameters
Test current: 2.5 A, 5 A, 10 A, 20 A, 50 A
Measuring ...

... test chambers water vapor permeability analyzer using infrared sensor is the highest accurate water vapor transmission rate tester, meeting standard of ASTM F1249. 1) Plastic film, composite film, aluminum foil, aluminized film,etc; 2) ...

... Water Vapor Permeability Tester Electrolytic Sensor Method W203 Watef Vapor Permeability Tester Wholly automatic, software easy to use. Curves of transmission rate, water vapor density, humidity and température, auto ...

... Introduction
The N530A 2.0 gas permeability tester uses the differential pressure method to measure gas transmission through films, sheets, paper and packaging materials. Designed for industrial R& D ...

... The Water Vapor Permeability Tester W309 is based on the gravimetric determination method (Cup Method) and can be used to test the water vapor transmission rate of plastic films, composite films, sheets, packages, bottles, and other materials ...

... acquires, visualizes (1 D/2 D/3 D), logs and exports measurement data for analysis and printing, supporting repeatable automated sequences for production testing and research.

Applications and ...

High Acceleration Mechanical Shock Testing Machine for Lithium Battery is designed for measuring and ensure shock performance of products and packages. It can do normal shock test with half sine wave, square wave, sawtooth wave etc., simulate products ...

... The pipe opacity tester can be used to determine the impermeability determination of plastic pipes and fittings (showing results as a percentage). The instrument is controlled by an industrial touch screen and operated by a touch screen. ...

... /T 18992 GB/T 18742.2 GB/T 18477.3 GB/T 18477.1 GB/T 15560 GB/T 15558.3 GB/T 13664 GB/T 13663 GB/T 10002 ASTM D 1599 ASTM D 1598 IS0 1167 Features The product has multiple specifications and models, and ...

... The JJRST series ring stiffness tester is suitable for the measurement of the ring stiffness of thermoplastic pipes with a circular cross-section, as well as for flat test and ring flexibility test. Meet the requirements of testing standards ...

This instrument specifies a method for the determination of the apparent density of loose materials (powders or pellets) that can flow from a specified funnel. It is an ideal test instrument for the chemical industry and quality inspection departments. ...