Falling dart impact tester BMC-H

for packagingfor filmfor sheet materials

The BMC-H Free Falling Dart Impact Tester is designed to determine the impact resistance of packaging materials such as plastic films, laminates, and paper by means of a free-falling dart from a specified height. This instrument is designed according to ASTM D1709 and ISO 7765-1, using methods A and B.Product Features:7-inch color touchscreen with graphical user interface (GUI).Fully automated testing process without manual calculations improves work efficiency.Two test modes, A and B, are available.The falling dart operates on the principle of electromagnetic suspension and can be released automatically.Pneumatic specimen grips prevent specimen slippage and ensure accuracy of test data.Built-in observation lamp allows for easy assessment of specimen condition.Users can choose between manual and pedal switch modes to start tests.Equipped with micro-printer and standard USB interface.Test Principle:At the beginning of the test, select the test method as the first step, estimate an initial mass and △m value, and then conduct the test. If the first sample is damaged, use the weight △m to reduce the falling mass; if the first sample is not damaged, use the weight △m to increase the falling mass for the next test. In short, the use of weights to reduce or increase the falling mass depends on whether the previous sample is damaged. After 20 samples are tested, calculate the total number of damaged samples. If n is equal to 10, the test is complete; if n is less than 10, continue the test after supplementing samples until n is equal to 10; if n is greater than 10, continue testing with additional samples until the total number of undamaged samples equals 10. Finally, the system automatically calculates the impact results.Test Standards:This test instrument conforms to many national and international standards: GB/T 9639.1-2008Applications:Basic Applications: Suitable for testing the impact resistance of plastic films, sheets, foils, and composite films with thickness less than 1 mm. Suitable for testing the impact strength of paper and paperboard.Extended Applications: Suitable for the falling ball impact test of the specimen. The specimen is clamped on the , and the falling ball of a certain quality is selected to hit the specimen from a certain height. The damage of the specimen is checked and the impact resistance of the specimen is judged. Suitable for the multi-angle impact of bottle caps and other materials.Technical Specifications:Test Method: Method A (Standard), Method B (Optional)Test Range: Method A: 50 ~ 2000 g 0.66±0.01m, Method B: 300 ~ 2000 g 1.50±0.01mAccuracy: 0.1g (0.1J)Specimen Clamp: Pneumatic ClampPressure of Gas Supply: 0.4 ~ 0.6 MPa (outside of supply scope)Port Size: Φ6 mm PU TubingSpecimen Size: > 150 mm x 150 mmPower Supply: AC 100-240V 50/60Hz (can be changed to local requirement)Instrument Dimension: Method A: 500 mm (W) x 520 mm (D) x 1370 mm (H), Method B: 500 mm (W) x 520 mm (D) x 2170 mm (H)Net Weight: 46 kg (Method A), 51 kg (Method A and B)Configurations:Accessories for Method A, Micro Printer, Pedal Switch, Plumb bob. Accessories for Method B, Professional Software, 485 Communication Cable, Acrylic Protective Cover. The gas supply port of the instrument is Φ6 mm PU Tubing; Customers will need to prepare for gas supply.Jinan Saicheng is always dedicated to the innovation and improvement of product performance and function. Therefore, technical specifications are subject to change without further notice. Jinan Saicheng reserves the rights of final interpretation and revision.