Bracket 6662 25 00

Transair Drops brackets make installing drops lines in an existing compressed air or industrial/inert gas system quick and easy. To install a drop bracket, you only need a drill, Transair drill bit (dépendent on the bracket being installed), and a Transair drilling jig to precisely drill the hole. Transair offers multiple styles of brackets to fit the space requirements of the existing system. For scénarios where the compressed air system cannot be shut down for modifications, Parker Transair offers the pressurized system (Hot Tap) bracket that can beinstalled under pressure. When installing the drop brackets, Parker suggests drilling the hole at the top of the pipe to prevent moisture and débris from entering the drop line. Drilling the hole on the top can be avoided with the use of the quick assembly bracket. Due to the placement of the seal, the quick assembly bracket can be installed in the side of the pipe and still prevent moisture and débris from entering the drop line. The pressurized system bracket requires a hot tap drill (pn: EA98 06 00) to install the bracket into a pressurized compressed air line. The "full bore" design of Transair drop brackets, paired with the low coefficient of friction in the aluminum pipe ensures optimal flow throughout the compressed air system. Ail drop brackets are 100% recyclable, silicone free, and made from materials with no propagation of flame. Ail drop brackets conform to the UL94HB standard. Parker Hannifin warrants ail Transair components to be free of defects in material and workmanship for 10 years from the date of installation. Markets: • - Automotive Assembly • - Food & Beverage • - Packaging • - Industrial Plants