Electric sewer milling robot eCutter

The future is electric – including the future of sewer robotics. Reducing CO2 and noise emissions is becoming more and more important in the everyday work of sewer rehabilitation companies. With the eCutter electric milling robot from Pipetronics, work can be carried out on-site with no emissions if required, and with no compromises when it comes to performance. It works particularly quietly, allowing work to be conducted even in the early morning hours or late in the evening. The eCutter is available in the EF 150 variant for small and EF 250 variant for large sewers, and can be used for milling in main sewers from DN 150 to 800. Equipped with modern CAN-Bus technology and intelligent sensors to support operators on the construction site and warn them before failures occur due to abrasion, the eCutter is a future-proofed technology. This power tool works well as a stand-alone solution, because of the homogeneous system architecture the robotic system can also be expanded easily if needed to add other sewer rehabilitation robots (PI.TRON filling and grouting system) or various multifunctional applications (HatSet, HydroJet Kit, WaterStop). Applications The eCutter can be used to conduct milling work on edges, persistent deposits, root invasion, sleeve displacements, sewer ruptures, cracks, damaged sockets, protruding connectors or steel parts, and to open installed lain pipe liners. Furthermore, completely closed sewers can be milled free from the front and steel anchors, reinforcement steel, or other obstructions can be removed. The eCutter can be used in main sewers sizes (EF 250).