Titration system SYCON P

The SYCON P is a titration device for measuring the +p value. In addition to the usual relays and input contacts, the online analysis device has a 20 mA current and RS485 interface with Modbus RTU protocol. Monitoring of a freely programmable limit value Measuring the +p value Graphic display, menu navigation in German, English, Italian, French, Spanish, Russian, Polish, Dutch and Danish. Easy commissioning using the installation assistant Documentation of all measurement results on an SD card Low maintenance effort thanks to hose pump technology and rinsing of the measuring cell with line pressure Self-calibrating against extraneous light, dirt and turbidity in the water sample Reliable through self-diagnosis and plausibility monitoring of the sensor data during the analysis Maintenance-free full-color sensor Ports: 4 potential-free outputs: Limit exceeded Exceeding the limit value / falling below the limit value / low reagent level Device failure Analysis active / cooling water valve / reagent level low Current interface configurable as 0 - 20mA or 4 -20mA for measured value output or status message Input for potential-free contact for triggering an external analysis, water meter for quantity interval or pausing the internal analysis interval Input for remote rest via external control Modbus RTU for querying the measured values ​​and device parameters by a PLC The measuring range is determined by the reagent used in the P25 series.