For robot payload 480 kg
Modular design
External signals
Wide range of media modules – simple to customize
Designed to meet bodyshop application demands
Tool changing ability for Tool changer TC480-1
The RSP tool changers are designed to maximize the flexibility and reliability of your robot fleet. They offer the possibility to enhance your robot application by allowing it to switch between different tools, such as grippers, weld units, fixtures etc. Tool changers from RSP are robust and can manage continuous changing operations with maintained reliability and safety. Depending on model and options, electrical signals, weld and servo power, data, water, and compressed air can be transferred from the robot side to the tool.
Mechanical interface -
ISO 9409-1 160-10-M10
Robot payload -
480 kg | 1060 lb
Fz -
± 5000 N | ± 1100 lb
Mz -
± 2500 Nm | ± 22100 lbf·in
Mx/My -
± 5000 Nm | ± 44000 lbf·in
Weight -
13.1 kg | 28.88 lb
Height -
60 mm | 2.36 in
Centre of gravity (Z) -
+ 40 mm
Air channels total -
1
Air channels dedicated -
2 (TC open and TC close)
Air channels available to tool -
1, Additional channels can be added with external media module
Air connection, inlet -
G 1/2″ (1x)
Max air pressure -
10 bar | 145 psi
Min air pressure -
6 bar | 87 psi
Air flow per channel -
2000 l/min | 70.6 CFM
Air quality -
Oil-clean and waterless filtered air, with max 25µm particle content
Signals total -
Depending on chosen signal module
Working temperature -
+10°C – +50°C | 50 °F – 120 °F