CAN inclinometer IS35

RS-232RS-4850-10 V

Product
IS35 inclinometer sensor by SENTOP for precise static and dynamic tilt measurement. Includes dimension drawing and brochure.

Key features

• Static or dynamic measurement
• Available in 1-axis or 2-axis versions
• Multiple analog and digital outputs (0–5 V, 0–10 V, 4–20 mA, SSI, RS232, RS422, RS485, CAN)
• Screw mount and zero-point setting at any position
• IP67-rated housing (aluminum alloy or plastic)
• Kalman filtering, 0.08° resolution, ±0.1° accuracy @ RT, 10 ms response

Technical specifications

• Measurement status: Static / Dynamic
• Measurement range: ±15°, ±60°, ±90°, ±180°, 360°
• Measuring axis: 1 axis or 2 axes
• Mounting: Horizontal; Horizontal/Vertical
• Measuring modes: Mode 0~4
• Mass: Approx. 85 g
• Protection degree: IP67
• MTTF: 10 years @ 40°C
• Housing material: Aluminum alloy / Plastic
• Resolution: 0.08°
• Accuracy: ±0.1° @ RT

Environmental specifications

• Operating temperature: -40°C to +85°C
• Storage temperature: -40°C to +105°C
• Temperature drift: 0.01°/°C
• Vibration: 10 g, 10 Hz–1.5 kHz
• Shock: 100 g, 6 ms (EN60068-2-27)
• ESD: Contact ±8 kV, Air ±15 kV
• EMS: 100 V/m (80 MHz–1 GHz, 1 kHz 80% AM)
• EFT/Surge: IEC/GB standards Level 4

Electrical specifications

• Input voltage: 5 VDC or 9–30 VDC
• Output signals: Analog 0–5 V, 0–10 V, 4–20 mA; SSI, RS232, RS422, RS485, CAN
• Current consumption: <90 mA @ 5 VDC
• Start-up time: <0.1 s
• Response time: 10 ms
• Connection: 8-core shielded jacketed cable (1 m ±5 cm); see terminal connection for pinout
• Filtering: Kalman filtering
• Insulation resistance: ≥100 MΩ

Dimensions
Dimension drawing available (尺寸图_SENTOP_IS35).

Compliance and reliability

• ESD, EMS and EFT/Surge tested per listed standards
• MTTF: 10 years @ 40°C

Options and ordering

• Axis configuration: 1-axis or 2-axis
• Output options: multiple analog and digital interfaces
• Housing and mounting variants available
• Cable length and zero-point configuration configurable on request
• Contact SENTOP for customization, calibration and ordering information