Cross fitting UDLT10

ISO3633 System: PVC is lightweight and easy to install. They require no special tools for cutting, and be installed with solvent cementing, threading, flanging, and roll-grooved joining. Application A.Construction industry 1.Indoor drainage and sewage fittings (Above and buried pipes) 2.Outdoor rainwater pipe&fittings B.Agricultural irrigation Product Details Scope: Solvent Weld Fittings include tees, elbows, adapters, repair couplings, and reducer couplings manufactured from durable PVC Specification: Pipe and fittings shall be manufactured from virgid PVC(polyvinyl chloride) vinyl compounds. Pipes intended to be used in areas where installation is usually carried out at temperatures below – 10 °C shall additionally conform to the requirements of an impact test (staircase method). The raw material shall be PVC-U to which are added those additives that are needed to facilitate the manufacture of components conforming to the requirements of this International Standard. PVC DRAINAGE PIPES AND FITTINGS System: PVC Pipe System Scope: Drainage pipe system can be used for road drains, agricultural, railway, airport, construction and public green. PVC has the smoothest flow surface of any piping material. The pipe will not be susceptible to blockages and will maintain a high flow capacity over the life of the pipeline. Specification: A plastic sewer system costs less to operate and maintain because it has greater flow capacity per given size and fewer joints. The economic life cycle of a PVC sewer system is projected at more than 50 years.