Threaded fittings

Diameter: 7 mm - 11 mm

*360° turning*90° flexing hose connectors*Male / Female thread

Diameter: 7 mm - 11 mm

Diameter: 0.06 in - 2 in
Operating pressure: 1,800 psi - 10,500 psi

Diameter: 7.4 mm
Operating pressure: 12 bar

The Prevost quick release safety coupling is a male threaded swivel coupler, which is fitted with a parallel male swivel elbow, and can swivel a full 360°. The elbow is black anodized, and the thread ...

Diameter: 8 mm
Operating pressure: 12 bar

Pressure : P.N. 12 bar Safety : avoids hose whip Construction : Composite Use : Pneumatic tools ID Passage : 8 mm Temperature : - 15°C + 70°C Colour : Black / Blue Flow rate at 6 bar : 2 ...

Diameter: 11 mm
Operating pressure: 12 bar

Pressure : PN 12 bar Construction : Wall fastener: aluminium alloy Safety : avoids hose whips Installation : 4 fastening holes Drain : Manual drain

Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 16 bar

... dimensions of the fitting.There are push-in fittings for metric pipes in the diameter range of 3 to 14, and push-in fittings for inch pipes in the diameter range of 1/8 to 1/2. Threaded ...

Diameter: 3 mm - 14 mm
Operating pressure: -0.99 bar - 16 bar

Fittings and accessories for inch tubes and provided with UNF / NPT threads The range of Metal Work fittings and accessories gets widened by the introduction of fittings and accessories ...

Diameter: 15 mm - 150 mm

... = Aluminium BR = Brass SS = Stainless steel PP = Polypropylene on request SIZE DIMENSIONS From DN 1/2" to DN 6" THREAD BSPP/NF ISO 228-1 GASKETS NBR

Diameter: 15 mm - 150 mm

... MATERIAL AA = Aluminium BR = Brass SS = Stainless steel PP = Polypropylene on request SIZE DIMENSIONS From DN 1/2" to DN 6" THREAD BSPP/NF ISO 228-1 GASKETS NBR

Diameter: 25 mm - 150 mm

Male Serrated hose shank. For circlip MATerial SS = Stainless steel size From DN 25 to 150 mm thread DIN 405

... Braided Hose Fittings Eaton's bestselling one-piece bite the wire style hose fitting that is qualified with virtually all braided hydraulic hoses. Aeroquip Channel = TTC Series Weatherhead Channel ...

Operating pressure: -0.95 bar - 16 bar

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FPM - Material: Aluminum, seawater-proof - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar) - ...

Operating pressure: 0.5 bar - 10 bar

- Short design (exhaust-side throttle) - Adjusting screw with jam nut - Whitworth pipe thread - VS seal rings - Seal in connection NBR (Perbunan) - Material: brass nickel-plated - Type: Cone-type throttle - Allowable ...

Operating pressure: 0.5 bar - 10 bar

- Short design (exhaust-side throttle) - Adjusting screw with knurl - Whitworth pipe thread - VS seal rings - Material: brass nickel-plated, Al black anodized, KST - Type: Cone-type throttle - Allowable medium: ...

Diameter: 0.5 in - 4 in

Male Threaded Adaptor Ideally suited for higher demanding irrigation applications like public parks, sports fields, golf courses and high-end agriculture based irrigation. It is also suited for industrial application.

Diameter: 0.5 in - 4 in

Female Threaded Adaptor Ideally suited for higher demanding irrigation applications like publicparks, sports fields, golf courses and high-end agriculture based irrigation. It is also suited for industrial application.

Diameter: 0.5 in - 4 in

Male Threaded Tee Ideally suited for higher demanding irrigation applications like public parks, sports fields, golf courses and high-end agriculture based irrigation. It is also suited for industrial application.

Diameter: 0.25 in - 2 in
Operating pressure: 20 bar

... conic threaded BSP, and a female cylindric threaded BSP, it would also have the ability to deliver a maximum pressure of 20 bar at a temperature ranging between 25°C to 180°C. SPECIFICATIONS : • - ...

Diameter: 7 mm - 19 mm
Operating pressure: 10 bar

... • - Hose coupler with NBR gasket Ref.2280 from DN 7 to DN 25 • - Male coupler threaded BSP with NBR gasket Ref.2281 from DN 1/4" to DN 1“1/4 • - Female coupler threaded BSP with NBR gasket Ref.2282 ...

Diameter: 0.5 in
Operating pressure: 10 bar

SPECIFICATIONS : • - Brass wall tap connection • - For sanitary valves USE: • - For water • - Mm Température Ts : 0°C • - Max Température Ts : + 90°C • - Max Pressure Ps : 10 bars Chromed wall tap connection with nut Ref. ...

Diameter: 0.79 mm - 6.35 mm
Operating pressure: -1 bar - 6.9 bar

... pushed onto the fitting by hand and also ensures a leak-tight connection along the inner diameter of the tubing. Barb fittings are best suited for use with soft flexible tubing such as Polyurethane or ...

Diameter: 0.25, 0.13 in
Operating pressure: 0 psi - 3,000 psi

Description: 37 degree straight male flare fittings. Configurations currently available for 1/8" and 1/4" tubing. Max Pressure Rating: 3,000 psig, always ensure that the temperature and pressure rating for your specificied ...

Diameter: 20 mm - 50 mm
Operating pressure: 10, 16 bar

Designed for usage of 25 years with media water and 20°C media temperature Due to: ISO 727, DIN EN ISO 1452, DIN EN ISO 15493 and ISO 7-1 Optimized for the process of dry installation

Diameter: 8 mm - 50 mm

5143 UNIONS HOSE SHANK CONICAL SEAT - FEMALE HOSE SHANK - STAINLESS STEEL 316L

Diameter: 8 mm - 50 mm
Operating pressure: 16, 20 bar

FEMALE / FEMALE UNION 90° ELBOW (CASTING) - STAINLESS STEEL 316 (Model : 5252) Series 52 - Fittings and piping accessories »

Diameter: 8 mm - 50 mm
Operating pressure: 20, 16 bar

MALE / FEMALE UNION ELBOW - STAINLESS STEEL 316 (Model : 5251) Series 52 - Fittings and piping accessories

Diameter: 0.5 in - 2 in

Diameter: 16 mm - 125 mm
Operating pressure: 16 bar

PVC-U Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-C Series of fittings ...

Diameter: 0.38 in - 4 in
Operating pressure: 16 bar

Series of fittings for pipes conveying fluids under pressure with threaded joints. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - Good chemical resistance: U-PVC resins guarantee excellent chemical ...

Diameter: 0.5 in - 8 in
Operating pressure: 15 bar

Series of fittings for pipes conveying fluids under pressure with solvent weld and threaded joints according to British Standard. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - Good chemical resistance: ...

Flexible Spiral Conduit Fittings Liquıd Tight Fixed & Swivel Cap nut:Brass with nickel plated Ring:PA6 Ferrule:Aluminium / brass Gland body:Brass with nickel plated O-ring:NBR Connection thread:Metric ...

Flexible Spiral Conduit Fittings NPT Liquid Tight Fixed & Swivel Cap nut:Brass with nickel plated Ring:PA6 Ferrule:Aluminium / brass Gland body:Brass with nickel plated O-ring:NBR Connection thread:NPT ...

Flexible Spiral Conduit Fittings Liquid Tight NPT Female Type Fixed & Swivel Cap nut:Brass with nickel plated Ring:PA6 Ferrule:Aluminium / brass Gland body:Brass with nickel plated O-ring:NBR Connection ...

Diameter: 8 mm - 50 mm

... by a single-row ball bearing • for-life lubrication provided in the factory • female thread according to ISO 7-1 (DIN 2999) Materials: • Basic unit with threaded connection: 1.7225 and 1.4571 Dimensions: ...

Diameter: 8 mm - 50 mm

... joined by a two-row ball bearing • for-life lubrication provided in the factory • female thread according to ISO 7-1 (DIN 2999) Materials: • Basic unit with threaded connection: 1.7225 and 1.4571 Dimensions: • ...

Diameter: 5, 12, 6 mm

STRAIGHT MALE ADAPTOR WITH METRIC THREAD The 1000 serie are push-on brass fittings to connect safely with thermoplastic tubes in pneumatic and fluid applications. The sealing is metallic and the connection ...

Diameter: 0.13, 0.38, 0.25 in
Operating pressure: -0.99 bar - 15 bar

MALE BAYONET Connection TubesPlastic tubes: PA6, PA11, PA12, FEP, PTFE, Polyethylene, *Polyurethane, Braided PVC, Braided polyurethane for art.1810. *For Polyurethane hoses it is required a minimum hardness of 98 shore. TemperaturesMinimum ...

Diameter: 0.25, 0.13, 0.38 in
Operating pressure: -0.99 bar - 15 bar

FEMALE BAYONET Nickel-plated brass threaded adaptors is the argest range of Aignep. Countless configurations in multiple sizes: nipples, reductions, plugs, T, L, hose adaptors. High performances in pressure and temperatures ...

Stream-Line Hose Adapters CEJN Stream-Line connections are available with swivel and fixed adapters, both are offered with or without kink protectors.

Diameter: 19 mm
Operating pressure: 0 Pa - 30,000,000 Pa

CEJN's Series 985 is constructed for for industrial automations where engineering connections can lessen costly down times because of repair-work or mold and equipment alteration. The automated couplings accommodates quick, simultaneous ...

Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi

Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2493-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: ...

Operating pressure: 0 bar - 16 bar

... offering. Also known as the “Accessory” line or “Standard Fittings” line, the RT Line consists of a wide variety of components such as: nipples, L-T fittings, hose, reductions and more. All RT fittings ...

Diameter: 0.25 mm
Operating pressure: 1,160 psi

The push-in fittings of the PM line are manufactured according to the American Standards (inch Tubings and NPT threads). They are conceived to work up to 1,160 psi in central grease applications. The push-in fittings ...

... For Insertion into Threaded Entries or Knockout to Connect Conduit • - Color: Black • - Material: Polyamide/Nylon 6.6 • - Number of Batteries: 0 • - Product Name: plastic fitting for conduit • ...

Diameter: 12 mm - 60 mm

New Type Quick Connector for Flexible Pipes - Product details Thread: Metric, PG, G(PF), NPT Materials: UL approved Nylon PA66 (Flammability UL94V-2) Wording temperature：-40℃-100℃ in ...

Diameter: 40, 25 mm

Diameter: 25, 40 mm

Diameter: 25, 40 mm

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 psi - 290 psi

316L Stainless Steel Push in Fitting Male Connector For Metric and Inch Size Tube, PT, R, BSPT Connection Thread Male connector (male straight) 316L inox pneumatic push in fitting is ...

Diameter: 4, 6, 8, 10, 12 mm
Operating pressure: 0 bar - 20 bar

... Available thread ranges from M5, M6, 1/8" to 1/2". Metric Tube ØD 4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm Inch Tube ØD 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" Thread Standard and Type R, PT, ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 psi - 290 psi

Stainless Steel Push to Connect Fittings with O-ring(G, BSPP Thread) - SPC Male Straight Stainless steel push to connect fitting with O-ring (G, BSPP Thread) is resistance to aggressive environments ...

Water meter fittings for the connection of water meters in house installations. Sizes: 3/4" female x 1/2" male Art.-No.:143184 1" female x 3/4" male Art.-No.: 143191 1 1/4" female x 1" male Art.-No.: 143207 1 1/2" female ...

Diameter: 16 mm - 75 mm
Operating pressure: 0 bar - 4 bar

... support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 16mm - 75mm Thread sizes: 3/8 "- 2 1/2"

Diameter: 25 mm - 110 mm
Operating pressure: 0 bar - 4 bar

... support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 25mm - 110mm Thread sizes: 3/4" - 4"

Diameter: 10 mm - 100 mm

... Benefits Of Our Threaded Fixings & Fittings: Manufactured from a selection of high quality materials Resistant to weathering factors, acids and rust Provides a strong and secure fixing point Mix of ...