Barbed fittings

Diameter: 3.4 mm - 9 mm

Made from polyethylene (Hd-PE) Colour: natural Excellent chemical resistance Suitable for both plastic and rubber hoses Applicable in professional and domestic environments Available in 3 different models

Made from POM Colour: natural Excellent chemical resistance Suitable for both plastic and rubber hoses Applicable in professional and domestic environments Available in 5 different models

Diameter: 0.06 in

Minimatic barb fittings from Clippard are corrosion resistant due to nickel plating which makes them perfect to be used in applications involving high amounts of moisture. These fittings can substitute ...

Bulkhead Barb Fittings Bimba's bulkhead fittings are available with barb sizes ranging from 1/16 to ¼ tube ID. Our consistently sharp, single-barb design provides a tighter grip and seal than standard ...

Elbow Barb Fittings Barbed Elbows barb sizes range from 1/16 to 3/8 Tube Id. The single-barb design of our Pneu-Edge® fitting provides a tighter grip/seal than standard multiple barbs. ...

Diameter: 0.13 in - 0.38 in

Reducing Cross Barb Fittings Bimba manufactures Reducing Cross fittings with barb sizes ranging from 1/16 to 3/8 Tube Id. The consistently sharp, single-barb design provides a tighter grip and seal ...

It is ensured that the pipes and blowtorches are securely connected an disconnected properly by the Isoflam welding safety couplings. They also protect the operator from the hazards associated with the use of gas. Gas and blow back is ...

Diameter: 4 mm - 6 mm
Operating pressure: 0 bar - 10 bar

The equal cross hose fitting is fabricated from an injection-molded plastic (POM) material and can be fastened securely on hoses. This hose fitting deals with numerous media such as air, water and other ...

Diameter: 9 mm - 76 mm

... are highly effective in connecting flexible and plain/reinforced hoses. Their internal diameter is up to 76 mm. They have barbed bodies. They are structured from nickel-plated brass.

Diameter: 13 mm - 40 mm

Vuototecnica's Rotating quick coupling fittings are made up of a jack with hose end connector and a threaded male coupler which links itself to the jack. They boast a nitrile rubber seal that ensures a perfect vacuum ...

Diameter: 2 mm - 6 mm
Operating pressure: 0 bar - 10 bar

... connection Metric thread with sealing ring G thread with sealing ring Barbed fittings Barbed bulkhead fittings Barbed tubing ...

Diameter: 7.6 mm
Operating pressure: max 16.0 bar

Vented safety function High-flow capacity quick disconnect Durable and robust for tough environments CEJN eSafe Series 326 is suitable for applications that require an easy to grip and high performing coupling. The eSafe ...

Diameter: 5 mm
Operating pressure: 0 Pa - 3,500,000 Pa

The 220 series of standard couplings and nipples are ideally used for applications concerning fluids, vacuums, and compressed airs. They employ safety rings that prevent unwanted and unexpected disconnections. These products are also ...

Diameter: 8.2 mm
Operating pressure: 0 Pa - 1,600,000 Pa

Vented safety function High flow capacity Strong and durable eSafe Series 430 offers a wide range of easy-to-grip couplings, including Stream-Line. eSafe is a one hand operated safety coupling that vents before disconnection ...

Diameter: 0.13, 0.17, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi

... 1/8-27 NPT or 1/4-18 NPT. The unique design (Patent #4,946,204) allows the fitting to swivel 360°. The snap type fitting is sealed with a Buna-N O-Ring. The swivel fittings are precision ...

Diameter: 0.13, 0.06, 0.17 in
Operating pressure: 0 psi - 125 psi

Air Logic's F-4150 Series Straight Quick Disconnect Pneumatic Components and Systems feature compact dimensional sizes, straight-through flow mechanisms, and shut-off functions. These components and systems showcase a total supply capability ...

Diameter: 0.06, 0.17, 0.13 in
Operating pressure: 0 psi - 125 psi

The AIR LOGIC F-4154 series quick disconnect elbows are small in size, feature a straight-thru flow, pressures up to 125 PSI, temperatures from 5 to 48 °C, and connections with barbs for 1/16", 1/8" or .170" I.D. tubing, depending on ...

Diameter: 4 mm - 12 mm
Operating pressure: -0.95 bar - 15 bar

- Sealing NBR - Material brass nickel-plated - Temperature range -20 to +80 °C - Working pressure range -0.95 to 15 bar

Diameter: 4 mm
Operating pressure: -0.95 bar - 16 bar

- Seals FPM - Material stainless steel 1.4301 / 1.4307 - Temperature range -20 to +120 ˚C - Working pressure range -0,95 to 16 bar

- Whitworth pipe thread - Chambered O-rings FPM - Material stainless steel 1.4301 / 1.4307 - Temperature range -20 to +120 ˚C - Working pressure range -0,95 to 16 bar

Operating pressure: 3, 6 bar

Universal, pneumatically operated retractable fitting in a modular design for fully automatic operation. Facts compact, smooth, and dirt-resistant design with interior media routing and integrated limit-position mechanism minimum ...

Operating pressure: 6, 10, 16 bar

Hygienic, pneumatically operated retractable fitting for use with fully automatic Unical controllers. Facts compact, smooth, and dirt-resistant design minimum maintenance costs and maximum flexibility thanks to completely ...

Operating pressure: 6 bar - 16 bar

Innovative manual retractable fitting with safe-to-operate rotary drive Facts compact, smooth, and dirt-resistant design minimum maintenance costs and maximum flexibility thanks to completely modular design very ...

Diameter: 40 mm - 100 mm

HALF COUPLING WITH LOCKING RING - HOSE SHANK WITH COLLAR - NBR GASKET - ALUMINIUM - STAINLESS STEEL 316

Diameter: 0.79 mm - 6.35 mm
Operating pressure: -1 bar - 6.9 bar

... pushed onto the fitting by hand and also ensures a leak-tight connection along the inner diameter of the tubing. Barb fittings are best suited for use with soft flexible tubing such as Polyurethane or ...

Diameter: 1.6 mm - 4.5 mm
Operating pressure: 0 psi - 100 psi

Description: Ultra miniature, fixed position elbow fitting, with 10-32 thread and built-in barb. Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the limiting ...

Diameter: 1.6 mm - 3.2 mm
Operating pressure: 0 psi - 100 psi

Description: Ultra miniature, adjustable position elbow fitting, with 10-32 thread and built-in barb. Max Pressure Rating: 100 psig, when used with appropriately sized polyurethane tubing. With a clamp installed, the ...

Diameter: 0.13, 4, 6 in
Operating pressure: 10 bar

The Cube Cupla, which is manufactured by Nitto, is a small and lightweight coupling for air supply lines to medical and scientific equipment. It has a compact design, and has a body made of plastic. It is ergonomic as the plug only needs ...

Diameter: 0.25, 0.38 in
Operating pressure: 15 bar

Hi Cupla Ace is a plastic coupling suitable for both air and water applications. Since it is made from plastic, it is lightweight and minimizes risks of damaging or denting various surfaces. However, it boasts a working pressure of 15 ...

Diameter: 10 mm - 20 mm

The RVM, RVF and RVT series are barbed fittings that are utilized in connecting the vacuum source to the vacuum but still maintaining the rigid and firm connection.

Diameter: 20 mm - 150 mm
Operating pressure: 16 bar

Diameter: 20 mm - 100 mm
Operating pressure: 16 bar

Diameter: 2, 6, 3, 4 mm
Operating pressure: -0.99 bar - 10 bar

STRAIGHT HOSE ADAPTOR Nickel-plated brass threaded adaptors is the argest range of Aignep. Countless configurations in multiple sizes: nipples, reductions, plugs, T, L, hose adaptors. High performances in pressure and temperatures ...

Diameter: 2, 6, 3, 4 mm
Operating pressure: -0.99 bar - 10 bar

TEE HOSE ADAPTOR Nickel-plated brass threaded adaptors is the argest range of Aignep. Countless configurations in multiple sizes: nipples, reductions, plugs, T, L, hose adaptors. High performances in pressure and temperatures (+300°C). Sharp ...

Diameter: 6, 12, 8, 10 mm
Operating pressure: 0 bar - 16 bar

SOCKET WITH REST FOR RUBBER HOSE Working Pressures 0 bar 16 bar Maximum static pressure (no pulsations) 35 bar Temperatures - 20 °C + 80 °C Fluids Compressed air

NORMAQUICK®MK connectors have been developed with the aim to achieve significantly reduced permeation rates. NORMAQUICK®MK provide a perfect link between the tank and the pipe system in cases where existing standard connectors are prone ...

Operating pressure: 1,000 psi

The ANVER Fittings are manufactured for vacuum or average pressure line connections. It is compatible to use with ANVER wire through the support vacuum hose and worm gear drive hose clamps. This device operates within ...

Diameter: 0.13 in - 1 in
Operating pressure: 0 bar - 80 bar

This hose adapter facilitates fast and easy connections between a female port and a hose that is self-fastening. It is manufactured from nickel-plated brass. It can withstand maximum working pressures of 80bar (1200psi/8MPa) and maximum ...

Diameter: 0.13 in - 1 in
Operating pressure: 0 psi - 6,000 psi

Stainless steel pipe fitting male barb connects hose on one end and a female connector on the other. This barbed fitting creates a tight seal on flexible and semi-rigid hose when used ...

Diameter: 0.13 in - 1 in
Operating pressure: 0 bar - 80 bar

Brass pipe fittings female barb connects hose on one end and a male connetor on the other. This barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose ...

... most renowned Brass Hose Barb Fitting Manufacturers, Suppliers and Exporter. For manufacturing these components, we ensure that fine quality of brass metal is used. We have gained much prominence as a Brass Hose Barb ...

... most renowned Brass Hose Barb Fitting Manufacturers, Suppliers and Exporter. For manufacturing these components, we ensure that fine quality of brass metal is used. We have gained much prominence as a Brass Hose Barb ...

Diameter: 3 mm - 15 mm

The Plastic Y Barbed Coupling, manufactured by Burkle, is ideal for applications such as pharmaceuticals, laboratory, industrial or manufacturing, water sampling and food processing. This provides a leak free and flow ...

Diameter: 3 mm - 15 mm

The hose tubing connector is characterized by its cylindrical straight structure. It fits various hose sizes and has two versions. The Polypropylene type resists working temperatures of up to +135°C while the Polyvinylidene fluoride type ...

Diameter: 4 mm - 17 mm

The Burkle universal hose tubing connectors for diameters from 4 to 17 mm feature conical nozzles and can be made out of PP or PVDF. The PP type has heat resistance up to 135 °C, while the PVDF type has heat resistance up to 160 °C and ...

The CRA20-B6-EM8 has connection rods and fittings for suction cups. It has a 6mm barb fitting for its outer diameter. Its materials are made of metal. The unit also comes together with a 20-50mm suction cups.

Diameter: 0.13 in - 1 in
Operating pressure: 15,000,000 Pa

The Series TSP is a Japanese open type hydraulic rapid couplings which features its non valve couplers having a minimal stream for optimum cooling. An assembly of coupler and nipples made with accuracy machine from solid bar steel stock. ...

Operating pressure: 0 bar - 16 bar

The S series of quick couplings from CIXI HYDRAULIC have components made from brass. They are engineered to be operated with one hand. These products are compatible with various models like the Nitto Kokhi Mini series. They may also work ...

Diameter: 0.13 in - 0.5 in
Operating pressure: 0 bar - 100 bar

The Series 29X is a set of push-button type of pneumatic quick couplings that are equipped with SUS316 stainless steel socket and plug. This single-hand operated coupling features a mechanism that can release the system with just a push ...

Diameter: 6, 9, 13 mm
Operating pressure: 0 bar - 20 bar

Options - Optionen Stainless Steel - Edelstahl Safety lock - Sicherheitsentriegelung Using Area - On temperature regulation applications with hot or cold water, oil etc - Injection moulding industries - On steam line

Diameter: 11 mm
Operating pressure: 40 bar

The internationally patented coupling DynaVariacor®, makes flexible and easy to handle all the supply hoses of washing pistols: Installed between the pistol and the hose, reduces efforts, increases the pistol’s manoeuvrability, avoid ...

Diameter: 4 mm - 65 mm
Operating pressure: -1 bar - 650 bar

... several materials, sizes and connections: BSP, NPT, Metric, ... through a range of standard fitting and product made to customer specific request. The Variacor fittings will be present at the Global ...