Quick couplings

Diameter: 0.13 in - 0.5 in

Male Tube/Thread Swivel Side Tee Push-in Tee Connector fittings enable quick tubing connection and disconnection. These fittings are designed for use with Nylon 11 or 12, Polyurethane (95 durometer or above) and LDPE ...

Diameter: 0.15 mm - 10 mm

IntelliSense® Fitting IntelliSense® fittings are the easiest way to attach IntelliSense® sensors to a pneumatic actuator. A standard in-line push to connect or stainless steel female NPT coupler is available. Standard fittings are included ...

Diameter: 0.13 mm - 0.5 mm

... OD •Recommended for use with 95A polyurethane tubing •Durable nickel plated brass construction •Push-in fittings enable quick tubing connection and disconnection •Suitable for vacuum applications to 29.5” Hg •Stainless ...

Diameter: 6 mm - 11 mm
Operating pressure: 16 bar

The RSI quick-release coupling range can be used to connect all your compressed air networks. Stäubli's 3-in-1 active safety system ensures complete protection against the risk of violent hose whiplash ...

The Stäubli TTX coupling range is designed to offer an optimum high flow rate and a non-spill technology during fluid transfers in a wide variety of media and industries. The TTX coupling is based ...

Diameter: 25 mm - 100 mm
Operating pressure: 25 bar

The Stäubli TCB coupling range is designed to offer an optimum high flow rate as well as clean and non-spill connections during fluid transfers especially in the chemical industry. The TCB coupling is ...

Diameter: 6 mm - 22 mm
Operating pressure: 400 bar

Diameter: 6 mm - 11 mm
Operating pressure: 12 bar

... red couplings are for Truflate. The connections aim for fast, convenient coupling and de-coupling. Their unique swivel structure facilitates fast assembly. A single motion depressurises ...

Diameter: 7.4 mm
Operating pressure: 2 bar - 12 bar

The safety quick coupling prevo S1 had been conceived for a instinctive and simple utilisation. Through his ergonomic and compact shape he will optimised flow rate and limite pressure drop. - Robust ...

Diameter: 6 mm - 8 mm
Operating pressure: 12 bar

PrevoS1 quick safety air couplings are available for most of the profiles used around the world such as ISO 6150 B, ISO 6150 C, European 7.2-7.4, ARO 210, British and Truflate. They ensure that the air ...

Diameter: 3 mm - 16 mm
Operating pressure: -0.9 bar - 16 bar

Series 6000 super-rapid fittings for plastic tubes are made durable with body and collet made from nickel plated brass. It has an O-ring made from NBR material and thread seal made from PTFE-NBR-PA materials. It operates on min -0,9 bar ...

Diameter: 4 mm - 16 mm
Operating pressure: -0.9 bar - 16 bar

These technopolymer fittings are designed with various features for high efficiency. They feature brass inserts, nickel-plated brass collets, and NBR seals. The gas cylinder is as per ISO-228 (BSP). The units operate at 0.9 bar minimum ...

Diameter: 4 mm - 12 mm
Operating pressure: -0.9 bar - 60 bar

The 8000 series is available with diameters of 4, 6 and 8 and features a nickel-plated brass body and gripper with seals out of NBR. It is equipped with gas cylindrical (ISO-228, BSP) threads and is designed to withstand a maximum pressure ...

Diameter: 13 mm - 40 mm

Vuototecnica's Rotating quick coupling fittings are made up of a jack with hose end connector and a threaded male coupler which links itself to the jack. They boast a nitrile rubber seal that ensures ...

Diameter: 4 mm - 10 mm
Operating pressure: -0.99 bar - 16 bar

Push-in fittings by Metal Work are the best elements for connecting pipes and actuators. Quick and easy to use, the Metal Work push-in fitting can be re-used thousands of times without affecting the pneumatic and mechanical ...

Diameter: 5 mm - 15 mm
Operating pressure: -0.99 bar - 18 bar

• Body: OT58 brass • Maximum pressure 261 psi, 1800 kPa 18 bar

Diameter: 0.13 in - 0.5 in
Operating pressure: 30 bar

The compressed air quick-fit coupling by Metal Work allows quick replacement of pneumatic equipment (drills, milling machines, screwers and actuators in general) without having to set ...

Diameter: 13, 19 mm

... to 10 bar and has an ambient temperature of -30ºC to 100ºC. It comes in different types of series with a wide variety of coupling connection, thread inch, and diameter mm.

Diameter: 0.13 in - 0.5 in
Operating pressure: 0 bar - 20 bar

Connection: M5, M7, G1/8, G1/4, G3/8, G1/2 For tubing outside diameter: 4, 6, 8, 10, 12, 14 mm Push-in sleeve: 4, 6, 8, 10, 12, 14 mm Ambient temperature: 0 ... 150° C Threaded connection: G thread with sealing ...

Diameter: 4 mm - 14 mm
Operating pressure: 0 bar - 16 bar

Connection: M5, M7, G1/8, G1/4, G3/8, G1/2 For outside tubing diameter: 4, 6, 8, 10, 12, 14 mm Push-in sleeve: 4, 6, 8, 10, 12 mm Threaded connection: G thread with sealing ring Push-in fittings Plug connectors ...

Diameter: 3 mm - 13 mm
Operating pressure: 0 bar - 10 bar

... : 3, 4, 6, 9, 13 mm Threaded connection Metric thread with sealing ring G thread with sealing ring Quick connectors Sealing caps Distributor pieces Union nuts Multiple distributors ...

Diameter: 12 mm
Operating pressure: 250 bar

This quick release coupling sleeve is used in Meiler automotive engineering. It is constructed from steel with electro-galvanized surface protection. The quick release coupling ...

Diameter: 6 mm - 25 mm
Operating pressure: 315, 160 bar

The quick-release steel coupling features steel housing, malleable cast iron above DN 12 and electro galvanized surface for automotive engineering applications. Connection 1 includes metric cylindrical ...

Diameter: 4 mm - 25 mm
Operating pressure: 225, 300, 250 bar

General applications, such as industry, construction, agricultural, and more. Made of steel with an electro galvanized surface. Connection 1 has a metric cylindrical outer thread and sealing form 1 has a 24° inner cone.

Diameter: 5.5 mm
Operating pressure: max 12.0 bar

... capacity Strong and durable Series 291 eSafe couplings offer high flow and require only a low connection force, which ensures a safe working environment. eSafe is a one hand operated safety coupling ...

Diameter: 7.6 mm
Operating pressure: max 16.0 bar

... safety function High-flow capacity quick disconnect Durable and robust for tough environments CEJN eSafe Series 326 is suitable for applications that require an easy to grip and high performing coupling. ...

Diameter: 8 mm
Operating pressure: max 12.0 bar

... capacity Strong and durable Series 381 eSafe couplings offer high flow and require only a low connection force, which ensures a safe working environment. eSafe is a one hand operated safety coupling ...

Diameter: 40 mm - 50 mm
Operating pressure: 4 bar

Patented system for swimming pools Removable and easy to assemble: fast connection, quick assembly time, no drying time, no protection measures required Assembly options: on FlexFit® hose, on rigid PE pipe, or on ...

Diameter: 40 mm - 50 mm
Operating pressure: 4 bar

Patented system for swimming pools Removable and easy to assemble: fast connection, quick assembly time, no drying time, no protection measures required Assembly options: on FlexFit® hose, on rigid PE pipe, or on ...

Diameter: 40 mm - 50 mm
Operating pressure: 4 bar

Patented system for swimming pools Removable and easy to assemble: fast connection, quick assembly time, no drying time, no protection measures required Assembly options: on FlexFit® hose, on rigid PE pipe, or on ...

Diameter: 1.6 mm - 9.5 mm
Operating pressure: 0 bar - 10.3 bar

Beswick's stainless steel, Push-To-Connect style fittings permit easy tube connections and disconnections, and are an excellent choice for use with many types of plastic or metal tubing including Polyurethane, Polyethylene, Nylon, Teflon, ...

Diameter: 0.25 in
Operating pressure: 0 psi - 150 psi

The PTC straight union fitting unit is designed to connect 1/4 inch tubes on either end. Utilizing a company patented Push-To-Connect module, the fitting can be easily connected and removed from tubing. All elements in the model are ...

Diameter: 0.25 in
Operating pressure: 0 psi - 150 psi

The 1/4” O.D. Tube, Elbow Union meant for fixed position 90 degree fitting is manufactured in 316,303 Stainless steel with Viton,Buna-N,Silicone and EPDM seals and is capable of handling pressure up to 150psig. Permitting simple ...

Diameter: 2.5 mm - 50 mm
Operating pressure: 200, 100 bar

This Nominal bore is designed for various media - compressed air, water, fuel, technical gases, lubricating oils/greases, and diverse fluids. The sizes are: 2.5 mm, 3, 4, 6, 7, 9, 12, 19, 32 and 50 mm. The working pressure depends ...

Diameter: 6, 12, 30 mm
Operating pressure: 12 bar

... series KL are standard low pressure mono couplings possessing nominal bores ranging from 6, 12 and 30 mm. It generates a pressure of up to 12 bar depending on the nominal bore and component. These mono couplings ...

Diameter: 6, 12, 7, 32, 19 mm
Operating pressure: 40 bar

... with nominal bore varying from 6mm to 32mm. The maximum working pressure of the couplings is 40 bar, however, it depends on nominal bore and the material used. The couplings can be used with diverse media ...

Diameter: 0.13 in - 1 in
Operating pressure: 350 bar

The WEH® TW17 Quick Connector is designed for sealing standardized internal thread applications for hydraulic and pneumatic pressure tests, function tests, leak tests. The higher the test pressure the tighter the WEH® ...

Diameter: 0.13 in - 1 in
Operating pressure: 0 bar - 350 bar

The WEH® TW17 Quick Connector is designed for sealing standardized internal thread applications. The higher the test pressure the tighter the WEH® Connector will clamp itself into the thread of the test piece and provides ...

Operating pressure: 350 bar

The WEH® TW17 Quick Connector is designed for sealing standardized internal thread applications. The higher the test pressure the tighter the WEH® Connector will clamp itself into the thread of the test piece and provides ...

Diameter: 0.25 in
Operating pressure: -13 psi - 232 psi

- Whitworth pipe thread - Chambered O-ring - Sealing NBR, FKM - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -13 to 232 psi (-0,9 to 16 bar) - Speed 800 rpm - Hybrid stainless ...

Operating pressure: -13 psi - 232 psi

- Whitworth pipe thread - Chambered O-ring - Sealing NBR, FKM - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -13 to 232 psi (-0,9 to 16 bar) - Speed 800 rpm - Hybrid stainless ...

Operating pressure: 0.5 bar - 10 bar

- plug-in coding: round, triangular, hexagon, octagon - Fool-proof coding - 1.4404 (316L) / 1.4571 (316Ti) stainless steel - Seals: low temperature -50°C to 200°C (red) FDA - working pressure 0,5 bis 10 bar - With shut-off function - ...

Diameter: 0.13 in - 2 in
Operating pressure: 15 bar - 75 bar

... water, hydraulic oil, and chemicals. It yields a maximum working pressure of 15 to 75 bar. The housing materials of this coupling consist of steel, stainless steel, and brass. The seal material comprises of FKM, NBR, ...

Diameter: 9.5 mm
Operating pressure: 10 bar

The Micro Cupla model manufactured by Nitto, is a low-pressure quick coupling that features a push-to-connect design. This device offers a compact construction, to deliver piping applications in narrow ...

Diameter: 14 mm
Operating pressure: 7 bar

These quick-connect couplings are very easy to connect. The plug fits into the socket with just a simple push of the hand. They are lightweight and compact in size. Their bodies are structured from chrome-plated ...

Diameter: 0.25 in

Quick coupler, female, including aluminium dust cap • Connection: ¼" BSP female • Fits: A 239

Diameter: 0.25 in

Quick coupler, female, including aluminium dust cap • Connection: ¼" BSP female • Fits: A 239 • Extra lock ring

Diameter: 0.25 in

Quick coupler, male, including aluminium dust cap • Connection: ¼" BSP female • Fits: A 238 and A 240

Diameter: 4 mm - 14 mm
Operating pressure: -0.99 bar - 20 bar

... the market from Aignep. It is the icon of quality, reliability and endurance in the pneumatic field. Main advantages - Quick connection and disconnection - Full Flow and Vacuum resistant tank to special shaped seals - ...

Diameter: 3 mm - 12 mm
Operating pressure: -0.99 bar - 20 bar

... the market from Aignep. It is the icon of quality, reliability and endurance in the pneumatic field. Main advantages - Quick connection and disconnection - Full Flow and Vacuum resistant tank to special shaped seals - ...

Diameter: 3 mm - 14 mm
Operating pressure: -0.99 bar - 20 bar

... the market from Aignep. It is the icon of quality, reliability and endurance in the pneumatic field. Main advantages - Quick connection and disconnection - Full Flow and Vacuum resistant tank to special shaped seals - ...

Diameter: 10, 0.13 mm

Diameter: 8 mm

Diameter: 8 mm

Toolholder Coupling and Adaptor, Stainless Steel, Connection Outside Thread

Diameter: 3 mm - 6 mm

Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds the tube on the external diameter ...

Diameter: 0.13 in - 0.5 in
Operating pressure: 16 bar

PUSH-IN FITTINGS IN BRASS A100 SERIES Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which ...

Diameter: 0.13 in - 0.5 in
Operating pressure: 18 bar

PUSH-ON FITTINGS Touch fittings are mainly used during “plastic” tubes assembly for pneumatic installation especially in case of vibrations or extreme climatic conditions (that involve changes on tube features by passing time). The ...

Diameter: 2 mm - 16 mm

For assembling with hose clips Straight version

Cam locking couplings rank among the most popular fittings in the industry, being used as quick connectors for hoses and pipe systems. In recent years, there has been a market trend towards ever worsening ...

... request. All DDC are also available with NPT thread or flange connection. Compatible with dry couplings from Emco, Avery Hardoll, Todo. Dry Disconnect Couplings (DDC) Type DDC-M. Female (hose unit) with ...

TW hose coupling are used for e.g. tank trucks to load or reload petroleum based products, chemicals and bulk goods. These quick couplings meet EN 14420-6 (old DIN 28450) and are known ...

Diameter: 0.13 in - 1.5 in
Operating pressure: 0 bar - 420 bar

- Flat face is easy to clean, reducing the inclusion of contamination inside the hydraulic circuit. - Minimal fluid loss during disconnection, reducing fluid loss to the environment. - Minimal air inclusion during connection / disconnection. - ...

Diameter: 0.38 in - 1.5 in
Operating pressure: 0 bar - 350 bar

- *Connection is allowed with residual pressure of the coupling, with male to drain. - Flat face is easy to clean, reducing the inclusion of contamination inside the hydraulic circuit. - Minimal fluid loss during disconnection, ...

Diameter: 0.38 in - 1.5 in
Operating pressure: 0 bar - 350 bar

- *Connection under residual pressure is allowed in one side and the internal valve system allows an easy connection. - Flat face is easy to clean, reducing the inclusion of contamination to the hydraulic circuit. - Minimal fluid loss ...

Diameter: 8 mm - 50 mm
Operating pressure: 0 bar - 2 bar

"Push & Seal" plastic quick connectors are an ideal means for the secure connection of cooling water and heating hoses as well as charged air systems.Spigot

Diameter: 4 mm - 33 mm
Operating pressure: 2.5 bar

NORMAQUICK® V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the combustion engine. The connectors can be used for both line-to-line and line-to-device ...

Diameter: 6.3 mm - 15.82 mm
Operating pressure: 10 bar

The NORMAQUICK® connectors are unique, secure and can be fixed quickly. The connectors are manufactured with the synthetic material that is suitable to carry different types of media. It is perfect for different types of cooling lines, ...