Digital heat meter WR3

The calculator multidata WR3 is used to measure heating and cooling energy in closed circulation systems. This is a so-called split heat meter, for which a calculator, flow sensor and temperature sensor pair are required. High level of compatibility The multidata WR3 is a real all-rounder that can be combined with nearly all standard temperature sensors and flow sensors. A special version is available for flow sensors with a high frequency pulse output. All appliances allow the connection of both the flow sensor and two additional appliances via the pulse generator as standard, e.g. a cold and hot water meter. The meter readings can be called up via the menu on the appliance or via reading systems. Suitable for heating and cooling The multidata WR3 is optimally suited for the measurement of heating and cooling energy. The measured consumption values for cold and heat are saved in separated registers. Areas of application are air-conditioning systems in which both heating and cooling energy is emitted through the same pipeline network. As a heating, cooling or combined heating / cooling energy calculator Temperature sensor connection optional in 4-wire technology Two additional inputs/outputs as standard Housing can be opened without tools Optional with M-Bus, RS 232 and RS 485 interface and programmable data logger Mounting on supplied wall adaptor or a standardised top hat rail M-Bus interface can be used instead of remote reading also for external power supply with 24 V DC