DN25 - 1" flow meters

Volumetric flow rate: 0.0009 m³/h - 4.5 m³/h
Precision: 1 %

... electromagnetic flowmeter for single-use biopharmaceutical applications

Process temperature: -50 °C - 180 °C
Process pressure: 0 bar - 100 bar

... stainless steel ( 1.4404 / 316L)

Process temperature: -20 °C - 90 °C
Process pressure: 0 bar - 16 bar

... Polyetheretherketone (PEEK)

Process connections
Thread connections: Male: G¼, G½, G¾, G 1, G 1½, G2; Female: ½ NPT, ¾ NPT, 1 NPT; Rc ¼, Rc ½, Rc ¾, Rc 1

Communication
Analogue ...

Volumetric flow rate: 60 l/min - 320 l/min
Process temperature: 80 °C
Process pressure: 0 bar - 16 bar

... (except DN15)

Characteristics / technical specifications

• Model: JUMO flowTRANS US W02
• Measuring principle: Ultrasonic (time/delay difference)
• Accuracy: 1 % of measured value
• Measuring

Process temperature: -5 °C - 90 °C
Process pressure: 10 bar - 40 bar
Precision: 0.5 %

... : Magnetic-inductive
Nominal widths: DN 25 to DN 300
Accuracy: 0.5 % of measured value
Medium temperature: Up to 90 °C
Process connection: PN 40 ( DN 25– DN ...

Volumetric flow rate: 0.0003 m³/h - 9 m³/h
Precision: 0.5 %

... temperature: Up to 90 °C
Insertion length: 110 mm (except TRI‑Clamp DN 25)
Inlet and outlet section: ≥ 0 DN / ≥ 0 DN
Inputs and outputs: SPE with PoDL (Modbus TCP, JUMO Cloud ...

Process temperature: -40 °C - 150 °C
Precision: 1, 2, 0.5 %
Repeatibility: 0.2 %

... AquaTrans AT600 is a liquid clamp-on flow meter designed to be accurate, durable and cost-effective. Rugged and reliable, this meter will remain fixed to your pipe for years to come. Applications The ...

Process temperature: -40 °C - 70 °C
Process pressure: 5.1 bar - 68 bar
Precision: 1, 5, 2 %

... The Panametrics DigitalFlow GC868 ultrasonic gas flow meter is a fixed-installation clamp-on meter. Its advanced clamp-on ultrasonic transducers and clamping fixture make this flow meter ...

Process temperature: -55 °C - 75 °C
Precision: 1, 2, 0.5 %
Repeatibility: 0.2 %

... Panametrics PanaFlow LC is an ultrasonic permanent clamp-on flow meter for process applications. This flow meter has the superior performance of the DigitalFlow XMT868 with improved signal ...

Precision: 0.5, 2 %
Repeatibility: 0.1 %

... diameters from 25 to 1,000 mm depending on model

Process temperature: -273 °C - 200 °C
Precision: 1 %

... independent measurement channels with a single converter

Precision: 0.3 %
Repeatibility: 0.1 %

... ELECTROMAGNETIC FLOWMETER M1000

• Bidirectional flow measurement for liquids with conductivity above 5 μS/cm, and above 20 μS/cm for demineralized water.
• Accuracy of ± 0.3% of measured flow

Volumetric flow rate: 0.2 m³/h - 848.2 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0 bar - 16 bar

... Inline Flow Sensor for Compressed Air and Gases Versatility The modular and compact EE741 is dedicated for accurate metering and monitoring of compressed air and technical gases such as O2, N2, Ar or CO2 in DN15 to DN50 ...

Volumetric flow rate: 0.32 ft³/min - 1,400 ft³/min
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 16 bar

... Flow Sensor for Compressed Air and Gases DN15 ( 1/2") - DN50 (2") The EE771 is ideal for flow measurement in pipelines with diameters of DN15 ( 1/2") ...

Volumetric flow rate: 90 m³/h - 1,195 m³/h
Process temperature: -30 °C - 80 °C
Process pressure: 0 bar - 40 bar

... mm | H 1 50 mm | H 109.65 mm | A 1 26 mm | A 20 mm
DN 25 | G 1" | 290 m3/h (170 cfm) | L 135 mm | B 55 mm | H 1 50 mm | H 109.65 mm | A 1 ...

Volumetric flow rate: 290 m³/h - 2,840 m³/h
Process temperature: -30 °C - 80 °C
Process pressure: -1 bar - 16 bar

... | Order No.
VA 520 flow meter with integrated DN 25 measuring section with flange | 0695 2523
VA 520 flow meter with integrated DN ...

Volumetric flow rate: 45.54 m³/h - 47,880 m³/h
Process temperature: -30 °C - 110 °C
Process pressure: -1 bar - 50 bar

... " (21.7 mm, DN 20) — Standard: 89 m3/h (52 cfm); Max: 177 m3/h (104 cfm); High Speed: 215 m3/h (126 cfm).
1" (27.3 mm, DN 25) — Standard: 148 m3/h (86 cfm); Max: 294 m3/h (173 cfm); ...

Volumetric flow rate: 0.1 m³/h - 160 m³/h
Process temperature: -20 °C - 65 °C
Process pressure: 0.2 MPa

... The meter is fully operated with battery. It is the 3rd generation of commercial gas meters for city gas applications. The meter is ATEX certified. It has also be used in the industrial ...

Process temperature: 0 °C - 30 °C
Process pressure: 16 bar

... tamper-proof, weatherproof, and UV-resistant casing, the Cubic ultrasonic water meter is especially robust, durable, and suitable for challenging climates. Unlike mechanical meters, the ultrasonic technology is unaffected ...

... configurable parameters include gas type, flow unit and reference conditions.

Characteristics of thermal flow sensor

• Total flow measurement — accuracy suitable for consumption

Volumetric flow rate: 1.4 l/h - 500,000 l/h
Process temperature: -20 °C - 100 °C
Process pressure: 1.5 bar - 10 bar

... These flowmeters operate according to the variable area principle, where a float is suspended in upward flowing media in a tapered plastic tube. The vertical position of the float within the metering tube depends on the flowrate of the ...

Volumetric flow rate: 2 l/min - 160 l/min
Process temperature: 0 °C - 85 °C
Process pressure: 0.1 bar - 2.3 bar

... Axial turbine flowmeter for liquids • For measuring the volume flow rate or for dosing tasks with large flow rates. • Compact design. • Wide useful operating range. • Wide variety of applications: ...

... and material approvals

• Flow elements, flow nozzles, orifice plates (data sheet)
• Pitot

Volumetric flow rate: 0.1 m³/h - 28,274 m³/h
Process temperature: -5 °C - 90 °C
Process pressure: 0 bar - 40 bar

... The PEM-1000 Series, manufactured by Aplisens, is an electromagnetic flow meter equipped with a robust and resistant cover of sensor. It has a nominal size of DN 10 up to DN 1000, maximum ...

Volumetric flow rate: 0 m³/h - 2,545 m³/h
Process temperature: -25 °C - 90 °C
Process pressure: 4, 2.5, 1.6 MPa

... Electromagnetic flowmeter type PEM-500 is applicable to the measurement of flow of the liquids with minimum conductivity of 5ěS/cm. Device measures flow and volume of liquids in both directions of flow. ...

Volumetric flow rate: 0.5 l/min - 100 l/min
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 400 bar

... The compact OG5 oval gear liquid flowmeter gives high performance, excellent chemical resistance and has high viscosity options available for liquids above 1000cSt. This oval gear flow sensor has a standard flow ...

Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 60 °C
Process pressure: 10 bar

... compact rugged acrylic topped Metra-Clear oval gear flowmeters are designed to give high performance with a low cost of ownership. The meters cover flow ranges from 0.01 to 100L/min on 30cSk oil and 0. 1 ...

Volumetric flow rate: 0.1 l/min - 160 l/min
Process temperature: -15 °C - 125 °C
Process pressure: 15 bar

... This multi-range radial flow turbine flow meter, the FT2 hall-effect turbine flow meter uses a low inertia turbine supported on robust sapphire bearings, in a chemically ...

... compressed air flow meter is designed to be easy to use, affordable and it's offering a wide measurement range. This makes it easy for you to choose the right flow meter, the S401 which ...

Process temperature: -30 °C - 70 °C
Process pressure: 0 bar - 10 bar
Precision: 1.5 %

... Thermal mass flow with no additonal compensation required Perfect to measure your compressed air flow and consumption Economic and affordable compressed air flow meter - S415 ...

Process pressure: 0.01 bar - 1.6 bar
Precision: 1.5, 0.5 %
Repeatibility: 0.5 %

... vacuum pumps. This inline flow meter measures the actual flow and absolute pressure on the low pressure side of vacuum pumps. Convenient installation, great flexibility, and can be installed anywhere Inline ...

Process temperature: -20 °C - 60 °C
Process pressure: 0.6, 1.6, 4 MPa
Precision: 0.5, 0.2 %

... Flange DN6~ DN1600 (≥ DN20 with built-in grounding electrode); wafer DN 25~ DN200; threaded DN10~ DN50; clamp DN15~ DN150.

Volumetric flow rate: 0 m³/h - 280 m³/h
Process temperature: -20 °C - 150 °C
Process pressure: 16 bar

... Description The sanitary sensor for electromagnetic flow meters MS 2410, flow meters, energy meters, ultrasonic flowmeters, and industrial automation systems have ...

Volumetric flow rate: 0 m³/s - 1.25 m³/s
Process temperature: -20 °C - 110 °C
Process pressure: 16 bar - 40 bar

... Description The wafer sensor for electromagnetic flow meters MS1000, flow meters, energy meters, ultrasonic flowmeters, and industrial automation systems have been ...

Volumetric flow rate: 0.6 m³/h - 60 m³/h
Process temperature: -30 °C - 130 °C
Process pressure: 1.6 MPa

... the IFX-M4-01 model are that all flow sensors are MI004 certified under European en1434, IFX-M4-01 can be used as sensors for calculating thermal or cooling energy and for measuring flow. The range starts from DN 25 ...

Volumetric flow rate: 0.1667 l/min - 23.75 l/min
Process temperature: -40 °C - 454 °C
Process pressure: 70, 10 bar

... dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology™ (AST™) with the industry's most extensive selection of application-matched ...

Volumetric flow rate: 0 l/min - 50 l/min
Process temperature: 0 °C - 100 °C
Precision: 4 %

... 250V 40mA D. Accuracy: ±4%F.S Operation Principle The variable area flow meter content a float & taper tube. The fluid flow through the taper tube and force up to the float. The flow ...

Volumetric flow rate: 30 l/h - 120,000 l/h
Process temperature: -50 °C - 400 °C

... h, kg/h, %, etc. Flow Rates For: -Water: 30 l/h up to 400,000 l/h (special ranges on request) -Air: 0.8 Nm3/h up to 1200 Nm3/h (special ranges on request) Connection Type: Thread Type, Flange Type or others available Connection Size: ...

Process temperature: 0 °C - 60 °C
Process pressure: 0.3 MPa
Precision: 1 %

... Limit: 0~60℃ Process Connection Size: Pipe segment integrated, PVC-U union (flexible joint) 0D20( DN15- 1/2"), 0D 25( DN20-3/4"), 0D32( DN 25- 1"), ...

Volumetric flow rate: 1.6 m³/h - 3,125 m³/h
Process temperature: -40 °C - 70 °C
Process pressure: 1 bar - 10 bar

... reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation. EPD Electromagnetic ...

Process temperature: -156 °C - 60 °C
Process pressure: 10 bar
Repeatibility: 0.4 %

... Description EPR Paddle Wheel Flow Meter, Water Flow Meter Paddle wheel flowmeter mainly by using the principle of rotating blades to measure flow. ...

Volumetric flow rate: 0 l/min - 250 l/min
Process temperature: -10 °C - 60 °C
Process pressure: 10, 6, 8, 16 bar

... minimum conductivity of 25 μS/cm. The frequency of the pulse output signal is proportional to the flow. The flow meters feature fast response, low pressure drop and a weatherproof (IP65) ...

Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %

... Tubing ID:  1/8"(3.2mm)CM025NS

• Flow Range: 0-6000 mL/min
• Accuracy: 0-300mL/min: ±9mL/min, 300-6000mL/min: ±3%
• Tubing OD: 1/4" (6.4mm)
• Tubing ID: 1/8"(3.2mm)

• Flow Range: 0

Volumetric flow rate: 0 l/min - 80 l/min
Process temperature: 0 °C - 60 °C
Precision: 2 %

... The CPD Clamp-on Flow Sensor / Flow Meter Overview
The CPD series clamp-on ultrasonic flow sensors are compact, non-invasive flow meters ...

Volumetric flow rate: 0 l/min - 400 l/min
Process temperature: 0 °C - 60 °C
Precision: 2 %

... detection of air bubbles, bidirectional flow measurement, volume dosing and flow switching without external circuitry.

Compare to CPD series clamp on flow sensors, the CS series flow ...

Process temperature: -30 °C - 160 °C
Precision: 1 %

... Features

• Wall-mounted continuous online measurement
• ±1% measurement accuracy
• Suitable for pipe sizes DN25 to DN6000
• Clamp-on, insertion

Process temperature: -40 °C - 80 °C
Precision: 1, 0.5 %
Repeatibility: 0.2 %

... Velocity range — -12 to +12 m/s / -12 to +12 m/s
Accuracy — ± 1.0% of reading / ±0.5% of reading
Repeatability — 0.2% / 0.2%
Linearity — ± 1.0% / ±0.5%
Pipe size — DN 25 to DN2000 ...

Process temperature: -40 °C - 80 °C
Precision: 0.5 %
Repeatibility: 0.15 %

... low-velocity range
Repeatability: 0.15%
Linearity: ±0.5%
Pipe size: DN 25 to DN5000
Analog output: 4–20 mA, 750 Ω max load
Pulse output: 0–9999 Hz, OCT
Relay output: SPST, 1 ...

Volumetric flow rate: 0.1 m³/h - 381,703.5 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 250 bar

... Electromagnetic Flow meter does not have any moving parts, ideal for wastewater applications or any dirty liquids which is conductive or water based, or for applications where low-pressure drop and low maintenance are ...

Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.5, 0.2 %

... The Economic type Clamp-on Ultrasonic Water Flowmeter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid with small quantity of tiny particles. Application ...

Volumetric flow rate: 0 m³/h - 800 m³/h
Process temperature: -20 °C - 110 °C
Process pressure: 40, 25, 120, 63, 160 bar

... Turbine flowmeter is fully comprehensive (all intelligence) which is developed in using the advanced technology from domestic and foreign countries and consisted of 4800-type flow sensor and 4800-type smart converter ...

Process temperature: -40 °C - 350 °C

... Overview
YFVW300D LoRa Wireless Vortex Flow Meter uses the Kármán vortex street principle for non-contact flow measurement of steam, gases and low-viscosity liquids. It integrates industrial ...

Process temperature: -40 °C - 350 °C

... Overview
The YFVW300D is a vortex flow meter based on the Kármán vortex street principle for non‑contact measurement of steam, gases and low‑viscosity liquids. It integrates industrial wireless communication ...

Process temperature: -40 °C - 350 °C

... >Design: non‑contact flow monitoring, no moving parts, no pressure‑sensing tubing required.

Process temperature: 0 °C - 60 °C

... instantaneous and total flow rate) regardless of pipe orientation.
Maximum Material Versatility: Compatible with a wide range of pipes, including carbon steel, stainless steel, PVC, copper, and Cu-Ni, covering diameters from DN20 ...

Process temperature: -40 °C - 130 °C
Precision: 1 %

... of Pipes: With a single pair of sensors, you can cover pipes ranging from DN 25 to DN1200 (from 1" to 48").
Complete Energy Analysis (BTU Function): In addition to flow ...

Process temperature: -30 °C - 160 °C
Precision: 1 %

... the ultimate professional solution for precise liquid flow measurement in closed ducts. Based on transit-time ultrasonic technology, this system ensures accurate measurements without interrupting flow or cutting pipes, ...