Process temperature: 0 °C - 60 °C
... instantaneous and total
flow rate) regardless of pipe orientation.
Maximum Material Versatility: Compatible with a wide range of pipes, including carbon steel, stainless steel, PVC, copper, and Cu-Ni, covering diameters from
DN20 ...
ASIT ITALIA
Process temperature: -40 °C - 130 °C
Precision: 1 %
... of Pipes: With a single pair of sensors, you can cover pipes ranging from
DN
25 to
DN1200 (from
1" to 48").
Complete Energy Analysis (BTU Function): In addition to
flow ...
ASIT ITALIA
Process temperature: -30 °C - 160 °C
Precision: 1 %
... the ultimate professional solution for precise liquid flow measurement in closed ducts. Based on transit-time ultrasonic technology, this system ensures accurate measurements without interrupting flow or cutting pipes, ...
ASIT ITALIA
Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %
... /strong>
The CM series clamp-on
flow sensors/
flow
meters are similar to CG series sensors/
flow
meters in basic structure and function. The major difference is that ...
XY-TEK
Volumetric flow rate: 0 l/min - 80 l/min
Process temperature: 0 °C - 60 °C
Precision: 2 %
... The CPD Clamp-on Flow Sensor / Flow Meter Overview
The CPD series clamp-on ultrasonic
flow sensors are compact, non-invasive
flow
meters ...
XY-TEK
Volumetric flow rate: 0 l/min - 12 l/min
Precision: 2 %
Repeatibility: min 0.1 %
... detection of air bubbles, bidirectional
flow measurement, volume dosing and
flow switching without external circuitry.
Compare to CPD series clamp on
flow sensors, the CS series
flow ...
XY-TEK
Precision: 0.3 %
... Product overview
- EFM water monitoring system from E&E Solutions Pvt. Ltd for continuous online monitoring of industrial water parameters.
- Designed to provide real‑time data to plant control and water management
Process temperature: 5 °C - 55 °C
Process pressure: 0.3 bar - 16 bar
Precision: 2 %
...
No risk of leakage.
Technical Specifications
Material | Cast Iron
Available Sizes |
DN
25 to
DN200
Weight (
DN
25 to
DN200) | ...
Volumetric flow rate: 2.12 l/min - 4,121,766.82 l/min
Process temperature: -20 °C - 180 °C
Precision: 2 %
...
- Can this meter be used in industries with high-flow water systems? Yes, it is designed for high-flow water systems and provides accurate measurements in industrial environments.
- Does
Process temperature: -40 °C - 120 °C
Precision: 0.5 %
Repeatibility: 0.15 %
... lithium-ion battery enabling approximately 12 hours of continuous use. Supplied clamp-on transducers use powerful ultrasonic pulses and improved signal processing; a single transducer set covers pipes from DN 25 ...
Process temperature: 0 °C - 60 °C
Precision: 1 %
Repeatibility: 0.3 %
... specifications
- Model: MTTHSC-1
- Measurement: Flow / Flow rate
- Detection: Flow/flow rate
- Technology: Transit time correlation (transit
Process temperature: 0 °C - 50 °C
Precision: 2 %
Repeatibility: 0.8 %
... time ultrasonic clamp-on
flow
meter for liquids (non-invasive).
Key message
NO NEED TO CUT THE PIPE — external clamp-on installation without process shutdown.
Main features
- Flow
Volumetric flow rate: 0.1 m³/h - 381,703.5 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 250 bar
... Electromagnetic Flow meter does not have any moving parts, ideal for wastewater applications or any dirty liquids which is conductive or water based, or for applications where low-pressure drop and low maintenance are ...
Holykell
Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.5, 0.2 %
... The Economic type Clamp-on Ultrasonic Water Flowmeter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid with small quantity of tiny particles. Application ...
Holykell
Volumetric flow rate: 0 m³/h - 800 m³/h
Process temperature: -20 °C - 110 °C
Process pressure: 40, 25, 120, 63, 160 bar
... Turbine flowmeter is fully comprehensive (all intelligence) which is developed in using the advanced technology from domestic and foreign countries and consisted of 4800-type flow sensor and 4800-type smart converter ...
Holykell
Volumetric flow rate: 0.1 m³/h - 160 m³/h
Process temperature: -20 °C - 65 °C
Process pressure: 0.2 MPa
... The meter is fully operated with battery. It is the 3rd generation of commercial gas meters for city gas applications. The meter is ATEX certified. It has also be used in the industrial ...
... compressed air flow meter is designed to be easy to use, affordable and it's offering a wide measurement range. This makes it easy for you to choose the right flow meter, the S401 which ...
SUTO iTEC GmbH
Process temperature: -30 °C - 70 °C
Process pressure: 0 bar - 10 bar
Precision: 1.5 %
... Thermal mass flow with no additonal compensation required Perfect to measure your compressed air flow and consumption Economic and affordable compressed air flow meter - S415 ...
SUTO iTEC GmbH
... vacuum pumps. This inline flow meter measures the actual flow and absolute pressure on the low pressure side of vacuum pumps. Convenient installation, great flexibility, and can be installed anywhere Inline ...
SUTO iTEC GmbH
Process pressure: 1.6, 2.5, 4 MPa
Precision: 5 %
... Electromagnetic flowmeter type PEM-500 is applicable to the measurement of flow of the liquids with minimum conductivity of 5ěS/cm. Device measures flow and volume of liquids in both directions of ...
Volumetric flow rate: 7 l/min - 120 l/min
Process temperature: 16 °C
Process pressure: 20, 100 bar
... of 5 digits from 0. 1 to 99999, for a total of 6 digits 1 to 999999 Total, resettable. The display also shows the supported flow rate, up to a maximum of 120 l/min. The K24-A diesel flow ...
PIUSI
... The NUFLO Cone DP Flow Meter inherently conditions the velocity flow profiles making it a meter of choice anywhere that space and weight reduction is an asset. While this metering technology ...
Volumetric flow rate: 0.5 l/min - 150 l/min
Process temperature: -40 °C - 125 °C
Process pressure: 0 bar - 18 bar
... The vortex flow sensor type 200 is based on the Kármán vortex street. You can choose between various versions as integrated temperature measurement. This flow sensor without moving parts is insensitive to pollution and ...
HUBA CONTROL
Process temperature: -40 °C - 150 °C
Precision: 1 %
... transit times t 1 and t2 are measured by an electronic flow transmitter. The signal from transducer A towards transducer B is accelerated by the flow (short t 1). The return signal from ...
KOBOLD Messring GmbH
Volumetric flow rate: 0.174 m³/h - 94.2 m³/h
Process temperature: -40 °C - 120 °C
Process pressure: 0 bar - 11 bar
... Flow monitor RHEASREG® SW Mechanical RHEASREG® SW paddle flow monitor with switching output, in an impact resistant plastic housing, with stainless-steel paddle, for flow ...
Volumetric flow rate: 90 m³/h - 1,195 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0 bar - 16 bar
... consumption of individual machines and analyze your leakage flows with just one measuring device. Advantages of the VA 525 flow sensor: - Measurement of mass flow rate, output of standard volume flow ...
CS Instruments GmbH & Co. KG
Mass flow rate: 0 kg/min - 200 kg/min
Process temperature: -196 °C - 400 °C
Process pressure: 0 bar - 882 bar
... Connection Sensor w/o Integral Transmitter M20 x 1.5 standard cable entry for JM, SM terminal box versions Optional entries available: ½” NPT or M 25 x 1.5 (only for SM) or ¾″ NPT (only for SM) M16 ...
Rheonik Messtechnik GmbH
Volumetric flow rate: 8 l/min - 150 l/min
Process temperature: -20 °C - 160 °C
Process pressure: 0 bar - 10 bar
... Flow monitor and indicator for liquids small physical size sturdy construction installation in any orientation Operation: The flow monitors and indicators ...
Meister Strömungstechnik GmbH
Volumetric flow rate: 12.5 l/min - 250 l/min
Process temperature: -15 °C - 80 °C
Process pressure: 8, 6, 10 bar
... for this magnetic flow meter are diverse: Can be used in areas where flow sensors with moving parts (paddle wheel, turbine sensors) cannot be applied due to contaminated media Sensor is intended for ...
Volumetric flow rate: 1.5 l/h - 60,000 l/h
Process temperature: 0 °C - 100 °C
Process pressure: 0 bar - 10 bar
... Inserts with damping feature for float in case of water hammer PVDF coated stainless steel guide rod for the dimensions DN50 and DN65 to stabilize the float Double scale for water in percent and l/h Special ...
Praher Plastics Austria GmbH
Volumetric flow rate: 2.5 l/h - 40,000 l/h
Process temperature: -20 °C - 80 °C
Process pressure: 5 bar - 15 bar
... Suitable for all kind of industries for flow measuring. Materials Flow tubes: borosilicate glass, length 300 mm Wetted parts: Coated steel, EN 1.4404 (SS316L), PVC, PP, PTFE Options 1 ...
TECFLUID
Process temperature: -25 °C - 180 °C
Process pressure: 0.6 MPa - 4 MPa
Precision: 0.5 %
... conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s. An electromagnetic flow meter is a volumetric Flowmeter that measures the flow velocity of a liquid ...
Supmea Automation
Volumetric flow rate: 2 l/min - 40 l/min
Process temperature: -20 °C - 90 °C
Process pressure: 10 bar
... form a Kármán vortex street in the flow. The distance between the individual vortices is constant. The frequency at which the vortices flow past a sensor depends on the flow velocity and is proportional ...
SIKA
Volumetric flow rate: 5 l/min - 100 l/min
... J100 flow meter adopts advanced technology, which can be widely used on different gasoline dispensers. This product has advantages as long using term, high precision, firm structure etc. It can be the best choice of gasoline ...
Zhejiang Datian Machine Co., ltd
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 10 bar
Precision: 2 %
... VPFlowScope M can be installed under pressure and measures (bi-directional) flow, pressure, temperature, and total flow simultaneously. The flow meter is an all-in-one and versatile flow ...
VPInstruments
Volumetric flow rate: 0.1 m³/h - 9.5 m³/h
Process temperature: -20 °C - 130 °C
Process pressure: 0 bar - 64 bar
... The RIF100 is an electromagnetic flow meter that utilizes Faraday's principle to measure the velocity of the liquid and convert it into a signal proportional to the flow. Among its advantages are good ...
Riels Instruments
Volumetric flow rate: 0.12 m³/h - 6 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 Pa - 100,000 Pa
... of ultrasonic flow meters for fuel gas! It realizes a wide range of measuring ability that includes microflows using the characteristics of ultrasonic waves. It is resistant to dust so there is no need to install filters. ...
Aichi Tokei Denki Co.,Ltd
the best suppliers