Clamp-on flow meter CPD series

ultrasonicvolumefor water

The CPD Clamp-on Flow Sensor / Flow Meter Overview
The CPD series clamp-on ultrasonic flow sensors are compact, non-invasive flow meters with an integrated display and embedded electronics.
The CPD flow sensor can be clamped onto the rigid plastic tubing and provide accurate flow-rate measurement (±2% RD) while detecting bubbles and large solid particles.
The non-contact design prevents contamination of the measured fluid.
Support measurement of water, pure water, cleaning water, acids, chemicals, CMP slurry, oil, beverages and alcohols.
Suitable for hygiene-critical and automated process applications such as wafer production, medical devices and industrial automation.

Applications

• Renewable Energy: Liquid mixture ratios, cooling liquid circulation systems
• Semiconductors: CMP, slurry mixing, wet etching, wafer/mask cleaning, electroplating, cooling systems
• Industrial Automation: Spraying equipment, cooling systems, lubrication systems, liquid transportation systems, water treatment, and wastewater treatment systems
• Medical Devices: Cooling systems, supply systems, flushing systems
• Biopharmaceuticals: Chromatography, upstream and downstream feeding, filtration

Product Features

• Accuracy: ±2% RD (reading) with documented 0 offset behavior
• Hygienic non-invasive measurement (no contact with fluid)
• Bi-directional measurement, volume calculation, bubble detection, dosing and flow-switch functions
• Compact integrated design with display and onboard electronics
• No blockages or moving parts; minimal pressure loss
• Multiple selectable outputs for process control and integration

Product Selection
CPD025NB

• Flow Range: 0-5L/min
• Low Flow Cut-off: ±10mL/min
• OD: 1/4”
• ID: 35mm

CPD006MB

• Flow Range: 0-5L/min
• Low Flow Cut-off: ±10mL/min
• OD: 6mm
• ID: 35mm

CPD032NB

• Flow Range: 0-10L/min
• Low Flow Cut-off: ±15mL/min
• OD: 5/16”
• ID: 57mm

CPD008MB

• Flow Range: 0-10L/min
• Low Flow Cut-off: ±15mL/min
• OD: 8mm
• ID: 57mm

CPD038NB

• Flow Range: 0-15L/min
• Low Flow Cut-off: ±20mL/min
• OD: 3/8”
• ID: 58mm

CPD010MB

• Flow Range: 0-15L/min
• Low Flow Cut-off: ±20mL/min
• OD: 10mm
• ID: 58mm

CPD050NB

• Flow Range: 0-30L/min
• Low Flow Cut-off: ±30mL/min
• OD: 1/2”
• ID: 611mm

CPD012MB

• Flow Range: 0-30L/min
• Low Flow Cut-off: ±30mL/min
• OD: 12mm
• ID: 611mm

CPD063NB

• Flow Range: 0-40L/min
• Low Flow Cut-off: ±40mL/min
• OD: 5/8”
• ID: 1014mm

CPD016MB

• Flow Range: 0-40L/min
• Low Flow Cut-off: ±40mL/min
• OD: 16mm
• ID: 1014mm

CPD075NB

• Flow Range: 0-50L/min
• Low Flow Cut-off: ±50mL/min
• OD: 3/4”
• ID: 1017mm

CPD020MB

• Flow Range: 0-50L/min
• Low Flow Cut-off: ±50mL/min
• OD: 20mm
• ID: 1017mm

CPD100NB

• Flow Range: 0-80L/min
• Low Flow Cut-off: ±80mL/min
• OD: 1”
• ID: 1522mm

CPD026MB

• Flow Range: 0-80L/min
• Low Flow Cut-off: ±80mL/min
• OD: 26mm
• ID: 1522mm

CPD125NB

• Flow Range: 0-100L/min
• Low Flow Cut-off: ±100mL/min
• OD: 1 1/4”
• ID: 2028mm

CPD032MB

• Flow Range: 0-100L/min
• Low Flow Cut-off: ±100mL/min
• OD: 32mm
• ID: 2028mm

Specifications

• Measurable liquids: Water, chemical solutions, oil, glue, grinding fluid, etc. (excluding large solid particles and air bubbles)
• Accuracy: ±2% RD (reading); zero offset/drift data based on water at 22°C ±3°C
• Repeatability: ±0.1% F.S.
• Calibration: default calibration based on water at 22°C; custom calibration available for specific tube material, diameter and fluid
• Tube materials: plastics
• Input voltage: 12–30 VDC
• Current consumption:
• Interface: 8-pin push-pull plug
• Fluid temperature: 0°C to 90°C
• Ambient temperature: 0°C to 60°C
• Storage temperature: -20°C to 70°C
• Shielding: cable grounding recommended
• Inputs and outputs:
• RS485
• Three selectable current outputs: 4–20 mA, 0–20 mA, 0–24 mA
• Two selectable voltage outputs: 0–5 V, 0–10 V
• 0–20 kHz frequency output
• Three selectable digital outputs: NPN, PNP, Push-Pull
• Digital input: grounding time >20 ms
• Accessory: 8-core shielded cable, default length 1.5 m
• Optional accessories:
• USB data converter for PC connection
• Flow sensor tool kit with display, supports up to 3 sensors on a PC
• Flow sensor display module for single-sensor monitoring with cable routing
• Data cable, 3 m, with push-pull connectors to link display and sensor