High-accuracy flow meters

Volumetric flow rate: 0.0009 m³/h - 4.5 m³/h
Precision: 1 %

... integration into single-use assemblies.

Key benefits

• High-accuracy flow measurement across a wide range without need for recalibration
• Disposable flow

Process temperature: -20 °C - 90 °C
Process pressure: 0 bar - 16 bar

... Measurement of conductive liquids (coolants, cold/hot water, chemicals, etc.)

Process temperature: -5 °C - 90 °C
Process pressure: 10, 16, 40 bar
Precision: 0.2 %

... The OPTIFLUX 2300 is an electromagnetic flowmeter (EMF) for all demanding applications with water and wastewater. The high-end meter is particularly suitable for applications requiring high ...

Volumetric flow rate: 60 l/min - 320 l/min
Process temperature: 80 °C
Process pressure: 0 bar - 16 bar

... Overview
Wear- and maintenance-free ultrasonic measurement enables high- accuracy flow measurement independent of fluid conductivity. The meter is extendable ...

Process pressure: 40, 160 bar
Precision: 0.5 %

... supported: DN 10–DN 150

Process temperature: -5 °C - 90 °C
Process pressure: 10 bar - 40 bar
Precision: 0.5 %

... Product overview
The OPTIFLUX 2000 is an electromagnetic flowmeter for water and wastewater applications. It is available with PP or hard-rubber linings and holds multiple drinking-water approvals for PP-lined versions.

Highlights< ...

Volumetric flow rate: 0.3 m³/h - 45 m³/h
Process temperature: -20 °C - 150 °C
Process pressure: 40 bar

... Magnetic-inductive flow meter The magneto-inductive flow sensor SMF320 is designed for the precise measurement of volumetric flow rates of conductive liquids in industrial applications. ...

... Precise flow measurement for applications with ultrapure water, water, and water-based media with up to 10% additives. The SU Puresonic detects flow rates of up to 1000 l/min with high precision, including ...

Volumetric flow rate: 0.1 l/min - 900 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 16 bar

... With volumetric flow quantity, total quantity and temperature indication High accuracy, repeatability and measurement dynamics For use in conductive media from 20 μS/cm With switching output, ...

Volumetric flow rate: 5 l/min - 120 l/min
Process temperature: 50 °C
Process pressure: 10 bar

... Flow meter TR3 PP | neutral media Easy to operate, compactly built and quick to mount on all Drum- and container pumps: the new Lutz Flow Meter TR3 in PP or PVDF. A handy meter ...

Volumetric flow rate: 10 l/min - 100 l/min
Process temperature: 60 °C
Process pressure: 10 bar

... stationary in plant engineering Features & Advantages • Measurement according to the swash plate principle • High measuring accuracy • Variable display orientation • Touch screen display with self-explanatory, ...

Volumetric flow rate: 10 l/min - 100 l/min
Process temperature: 80 °C
Process pressure: 10 bar

... stationary in plant engineering Features & Advantages • Measurement according to the swash plate principle • High measuring accuracy • Variable display orientation • Touch screen display with self-explanatory, ...

... UDM 300 - Advanced ultrasonic technology for mobile and highly accurate flow measurements Special features: ■ Very high measurement accuracy (also bidirectional) ■ Accurate even at extremely ...

Process temperature: 20 °C - 55 °C

... maintenance, high accuracy, fast response, wide rangeability, and the GF868 flowmeter is the clear choice for flare gas applications. The GF868 is a highly versatile, high-performance ...

Process temperature: -40 °C - 70 °C
Repeatibility: 0.2 %

... Overview
The AquaTrans AT620 is a clamp-on ultrasonic liquid flowmeter designed for applications where flexibility, redundancy and measurement confidence are required. Based on the AquaTrans AT600 platform, ...

Process temperature: -200 °C - 120 °C
Precision: 0.25 %

... series of advanced ultrasonic flow meters. Sentinel LNG demonstrates new levels of performance, reacts to changes in flow rate with incredible speed and accuracy, and ...

Volumetric flow rate: 0 l/min - 0.1 l/min
Process temperature: 5 °C - 50 °C
Process pressure: 0 bar - 5 bar

... micro flow rate liquid flowmeter F7M uses MEMS sensing technology to measure stable flow rates starting at 0.1 mL/min, a range that was previously unreliable with standard meters. The ...

Volumetric flow rate: 0.5 m³/h - 170 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 10 bar

... of individual burners and flow rate management of combustion equipment. Features * - High- accuracy, high-speed response measurement The gas flow monitor ...

Precision: 0.8, 2 %
Repeatibility: 0.1 %

... industries, and steam networks.

ADVANTAGES

• High measurement accuracy
• Excellent dimensional stability at high flow rates and high

Process temperature: max 120.0 °C
Process pressure: max 160.0 bar
Precision: 2 %

... ORIFICE FLOWMETER FOR LOW INDUSTRIAL FLOWS
RELIABLE LIQUID AND GAS FLOW MEASUREMENT IN SMALL-DIAMETER PIPES

The Fuji Electric integral orifice flowmeter ...

Precision: 0.5, 2 %
Repeatibility: 0.1 %

... differential pressure flow measurement for demanding industrial processes. Easy to integrate, it ensures continuous and reliable monitoring of fluids, even under high temperature or pressure ...

Volumetric flow rate: 10 l/min - 100 l/min
Process pressure: 6 bar

... FLUX Flow meters, nutating disc type FMC 100, are designed for the use with FLUX drum pumps or for the stationary application e.g. in piping systems. With the evaluation unit FLUXTRONIC® filling and dosing processes of ...

Volumetric flow rate: 25 l/min - 250 l/min
Process pressure: 6 bar

... attributes Nutating disc meter Inductive counter - independent of the conductance of the medium Insensitive to small solids Easy Handling Easy assembly on pump No metals in the medium area- also for non-lubricating ...

Volumetric flow rate: 10 l/min - 100 l/min
Process pressure: 4 bar

... The FLUX flow meter FMJ 100, built according to the nutating disc principle, can be used with FLUX drum pumps e.g. with the evaluation unit FLUXTRONIC® the filled quantity can be displayed. This way filling and dosing ...

Volumetric flow rate: 90 m³/h - 1,195 m³/h
Process temperature: -30 °C - 80 °C
Process pressure: 0 bar - 40 bar

... mass flow sensor for integration on machines and downstream of treatment units. It combines a removable sensor insert with modern digital interfaces for energy monitoring and process control. No inlet section is required due to the integrated ...

Volumetric flow rate: 45.54 m³/h - 47,880 m³/h
Process temperature: -30 °C - 110 °C
Process pressure: -1 bar - 50 bar

... by the flowing gas is proportional to mass flow; the temperature difference is used to calculate mass flow.

Volumetric flow rate: 290 m³/h - 2,840 m³/h
Process temperature: -30 °C - 80 °C
Process pressure: -1 bar - 16 bar

... mass flow meter VA 520 (inline)

Brand
CS-Instruments

Product information
The VA 520 is a thermal mass (calorimetric) flow meter for ...

Precision: 0.5, 0.2 %
Repeatibility: 0 % - 0.1 %

... >Overview
YUNYI liquid turbine flowmeter is a velocity-type precision flow measurement instrument. When low-viscosity liquids flow through the meter, the fluid’s ...

Precision: 0.5 %

... rotating or flow-restricting components, minimal pressure loss and virtually no clogging; suited to slurries and fluids containing fibres/solids.

Precision: 0.5, 1 %

... Wireless measurement · Zero pressure loss accuracy · A new era of conductive fluid monitoring
The YFM4800E NB wireless electromagnetic flowmeter applies Faraday's electromagnetic induction principle combined ...

Mass flow rate: 0 kg/h - 5 kg/h
Volumetric flow rate: 2 l/min - 1,500 l/min
Process temperature: -10 °C - 55 °C

... category
Mass flow sensing products: mass flow meters

MF3000
The MF3000 series mass flow meters are designed for general-purpose gas metering, ...

... /HCA Series Ultrasonic Gas Meter is a type of electronic meter that adopts TOF (Time of Speed) principle to measure flow velocity of gas medium. Employing advanced ultrasonic ...

Process temperature: -40 °C - 60 °C

... Cubic ultrasonic gas flow meter is an advanced electronic meter for natural gas flow measurement, which adopts ultrasonic technology to maintain long-term ...

Volumetric flow rate: 0.3 l/min - 140 l/min
Process temperature: -20 °C - 70 °C

... SONOFLOW CO.55 CLAMP-ON SENSOR - NON-CONTACT FLOW METERS FOR LIQUIDS IN FLEXIBLE TUBES The ultrasonic clamp-on flow meter SONOFLOW CO.55 measures the flow ...

Volumetric flow rate: 14 l/min
Process temperature: 10 °C - 50 °C

... The hybrid flow-bubble sensors of the series SONOFLOW CO.56 Pro V2.0 and SONOFLOW CO.56 combine accurate flow measurement and reliable air bubble detection in liquid filled medical tubing. They feature a simple integration ...

Process temperature: -20 °C - 70 °C
Process pressure: 0 bar - 16 bar

... The SONOFLOW IL.52 ultrasonic flow sensor uses bidirectional measurement in order to achieve excellent precision, detecting even the smallest flow rates with speed and efficiency. It's construction and ...

Process temperature: 120 °C
Process pressure: 25 bar - 110 bar

... FLOW MEASUREMENT FOR DENSE-PHASE CONVEYING Continuous solids mass flow measurement in dense-stream conveying and high levels of throughput Designed to measure solid flows ...

Volumetric flow rate: 1 l/h - 600 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 2 bar - 25 bar

... heating) oil and other liquids with kinematics viscosity of 1.5 cSt to 6 cSt can be measured by DFM. DFM fuel flow meter can be used as stand-alone flow measurement solution or can be integrated intro ...

Volumetric flow rate: 1 l/h - 500 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 2 bar - 25 bar

... with kinematics viscosity of 1.5 cSt to 6 sSt can be measured by DFM. DFM fuel flow meter is a tool for direct fuel consumption measurement, the data from the flow meter is used in ...

Volumetric flow rate: 1 l/h - 500 l/h
Process temperature: -20 °C - 60 °C
Process pressure: 2 bar - 25 bar

... cSt to 6 cSt can be measured by DFM. DFM fuel counter is an autonomous tool for direct fuel consumption measurement, which can be used without additional devices for data logging. The fuel counter is used in vehicle ...

Process temperature: -20 °C - 70 °C

... Allows high accurate flow measurements using the transit time method according to IEC 60041 for part filled and full pipes, open channels and water bodies. Up to 8 measurement paths. -Proven robust ultrasonic ...

... time flow the NivuFlow Energy Saver allows you to realise energy saving potentials with many more benefits for your pump station operators. Alarms -Well high level low flow alarm shows potential ...

Process temperature: -20 °C - 70 °C

... For high accurate and portable flow metering in part filled and full channels. Best use for wastewater applications. For high accurate and portable flow metering in part filled and ...

Volumetric flow rate: 0.03 m³/h - 0.6 m³/h
Process temperature: 0 °C - 50 °C
Precision: 0.5 %

... Product Overview
Atrato® Ultrasonic Beverage Flow Meters are the latest addition to Titan’s Atrato® range of inline ultrasonic flowmeters. Designed primarily for the drink ...

Volumetric flow rate: 0 l/min - 20 l/min
Process temperature: -20 °C - 110 °C
Process pressure: 30, 10 bar

... inline ultrasonic flowmeters, now with ASCII streaming, utilise Titan’s patented technology that enables the Atrato to operate with excellent accuracy over very wide flow ranges. The Atrato ultrasonic ...

Volumetric flow rate: 0.0012 m³/h - 9.6 m³/h
Process temperature: 0 °C - 80 °C
Process pressure: 0 bar - 15 bar

... br>The FT2 turbine flowmeter with optical detection is a multi-range radial flow transducer designed for precise measurement of low to medium liquid flow rates. It features a low-inertia turbine on sapphire ...

... With the S402 OEM thermal mass flow meter, SUTO is completing its flow meter product range. The S402 OEM is made for compressed air system and solution providers, offering an affordable ...

Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: max 450.0 bar

... measurements can be achieved.

Advantages of the VSI+ gear flow meters

• Highest accuracy and linearity
• Short response times
• Large

... residual non-linearity from the system to improve the overall accuracy. This significantly improves the % of reading errors when flow rates are at a small fraction of the controller’s full scale flow. FLEXIBLE ...

Process temperature: -20 °C - 60 °C
Process pressure: 0.6, 1.6, 4 MPa
Precision: 0.5, 0.2 %

... .

Process temperature: -40 °C - 60 °C
Process pressure: 4, 1.6, 1, 0.6 MPa
Precision: 0.2, 0.5 %

... instantaneous flow, velocity and flow percentage.

Process temperature: -40 °C - 60 °C
Process pressure: 1.6, 1, 0.6 MPa
Precision: 1, 0.5 %

... MFE600Z electromagnetic flowmeter designed for accurate and stable flow measurement of conductive liquids in industrial applications.

Advantages

• High measurement accuracy:

Precision: 0.25, 0.4 %
Repeatibility: 0.5 %

... various sensor parameters, anticipating possible problems. The battery converter with integrated modem MV255, flow meters, energy meters, ...

Volumetric flow rate: 0.2 m³/h - 2,000 m³/h
Process temperature: 0 °C - 150 °C
Process pressure: 16, 40 bar

... against the direction of the fluid flow. Description The ultrasonic flow meter IFX-A, flow meters, energy meters, ultrasonic ...

Process temperature: 10 °C - 45 °C
Process pressure: -1 bar - 20 bar
Precision: 2.5 %

...
The ATEQ MF570 is a differential micro flow tester combining fast cycle times with high- accuracy leak measurement. It uses differential pressure drop and stable flow ...

Process temperature: -40 °C - 85 °C
Precision: 1 %
Repeatibility: 0.1 %

... whole water cross-section. Therefore a very high accuracy of the discharge measurement is guaranteed also for very wide water bodies. Features and advantages - Discharge measurement with high ...

Process temperature: -45 °C - 454 °C
Process pressure: 10, 6.9, 34, 70 bar
Precision: 0.5, 1.75 %

... thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large ...

Volumetric flow rate: 0 m³/h - 244,290.2 m³/h
Process temperature: -20 °C - 120 °C
Process pressure: 1.6, 1, 0.6 MPa

... electromagnetic flowmeter is used to measure the volume flow of conductive liquids and slurries in closed pipes. The measuring flow rate is not affected by density, viscosity, temperature and pressure ...

Volumetric flow rate: 1.6 m³/h - 3,125 m³/h
Process temperature: -40 °C - 70 °C
Process pressure: 1 bar - 10 bar

... reasonably priced, most accurate flow meter tailored for your applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation. EPD Electromagnetic ...

Volumetric flow rate: 0 l/min - 300 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 0.2 bar - 2 bar

... higher flow accuracy, data logging, humidity compensation, or a wide flow accuracy specification. See the Model Guide below to find model that will work best for you application! GAS ...

Volumetric flow rate: 0.1 l/min - 100 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 10, 64, 100 bar

... The High Performance MFM / MFC That Adapts To Your Process EL- FLOW® Prestige, the latest generation thermal mass flow meters and controllers for gases, represents a truly ground-breaking ...

Volumetric flow rate: 0.1 l/min - 1,670 l/min
Process temperature: -10 °C - 70 °C
Process pressure: 400, 200, 100, 64 bar

... EL- FLOW® Select series Mass Flow Meters/Controllers are thermal mass flow meters of modular construction with a ‘laboratory style’ pc-board housing. Control valves can ...

Volumetric flow rate: 0.1 l/min - 50 l/min
Process temperature: -10 °C - 50 °C
Process pressure: 1,000, 1,500 psi

... solar industry requirements as well as other high purity gas applications. The base blocks of the Mass Flow Meters and Controllers have 1/4" face seal male (VCR) connections. Metal Sealed Mass Flow ...

Volumetric flow rate: 0.63 ft³/min - 120 ft³/min

... Type II solids flow meter utilizes patented CentriFlow Technology, just as every CentriFlow mass flow meter in order to deliver a quick and accurate mass flow measurement ...

Mass flow rate: 100 lb/h - 1,000,000 lb/h
Volumetric flow rate: 0.1 ft³/min - 156.3 ft³/min
Repeatibility: 0.1 %

... depending on your process. The CentriFlow® Type I Meter, just as all CentriFlow® brand meters, is a mass flow meter designed for measuring bulk solids continuously within a process. ...

... turbulent or reverse flow, while it can take as much as 30 diameters of straight duct run to eliminate cyclonic flow. If you do not have the proper amount of straight duct run present to accurately measure your air flow, ...

Volumetric flow rate: 0 l/min - 5,000 l/min
Process temperature: -10 °C - 60 °C
Process pressure: 145 psi

... Responsive gas flow control that suppresses pressure fluctuations An excellent MFC needs to do only one thing well: keep the flow rate at your setpoint. Alicat’s MC series gas mass flow ...

Volumetric flow rate: 0 l/min - 1,000 l/min
Process temperature: -10 °C - 60 °C
Process pressure: 45 psi

... Pressure Drop Gas Mass Flow Meters High- accuracy, multivariate flow measurement with minimal system impact “Whisper” series mass flow meters ...

Volumetric flow rate: 0 l/min - 5,000 l/min
Process temperature: -10 °C - 60 °C
Process pressure: 145 psi

... MB–Portable Gas Mass Flow Meters Laboratory-grade flow verification, anywhere you need it Stopping an operational process for validation or calibration is a necessary evil. Alicat’s portable flow ...

Volumetric flow rate: 0 m³/h - 19.8 m³/h
Process temperature: 0 °C - 90 °C
Precision: 2 %

... Product Overview
The TAD series ultrasonic in-line flow sensor from XY-TEK integrates sensing and signal processing in a compact housing to provide continuous liquid flow measurement ...

Volumetric flow rate: 0 l/min - 12 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %

...
The CM series clamp-on ultrasonic flow sensors / flow meters are compact, non-invasive devices with embedded electronics. They attach to flexible plastic tubing to measure liquid ...

Volumetric flow rate: 0 l/min - 100 l/min
Process temperature: 0 °C - 60 °C
Precision: 3 %

... Overview
The CM series clamp-on ultrasonic  flow sensors /  flow  meters are compact, non-invasive devices with embedded electronics. They attach to flexible plastic tubing to measure liquid  flow rate and detect air bubbles and large solid particulates ...

Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 16 bar
Precision: 1.5, 2.5, 2 %

... compatibility with standard secondary meters. Output options: 4–20 mA, impulse, Modbus RS485, HART.